• 한국철도학회논문집
• /
• 제16권2호
• /
• pp.110-116
• /
• 2013

궤도틀림은 철도차량의 주행안전성 및 승차감에 매우 큰 영향을 미치는 중요 인자 중 하나이다. 따라서, 차량의 주행안전성과 승차감의 확보를 위해서는 주행속도, 차량의 동적특성, 궤도틀림 검측차의 검측특성, 검측주기등을 고려하여 적정한 궤도틀림 기준을 설정하고, 관련 기준에 따라 궤도틀림을 철저히 관리하여야 한다. 본 논문에서는 궤도틀림 중에서 방향틀림이 KTX 차량의 거동에 미치는 영향을 조사하기 위하여 철도차량 동특성 해석프로그램인 VAMPIRE를 이용하여 방향틀림의 파장과 진폭에 대한 매개변수해석을 수행하였다. 방향틀림 크기와 파장에 따른 KTX의 탈선계수, 대차가속도, 차체가속도 및 궤도횡압 등의 주행거동을 조사하였으며, 방향틀림이 KTX차량의 주행안전성과 승차감에 미치는 영향을 분석하였다. 방향틀림은 차량주행안전성에 미치는 영향이 크며, KTX 주행안전성 확보를 위하여 방향틀림을 엄격하게 관리하여야 함을 알 수 있었다.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.550-558
• /
• 2005

The track performance evaluation in curves of conventional line subjected to loading condition caused by tilting trains was carried out. And the correlations between train speed and track alignment was reviewed. The parameters of track alignment were determined by field investigation of all curves in conventional line. It was founded that the pressure of the rail did exceed the allowable stress when the tilting train speed was over 96km/hr in radius of 300m. As the radius of curvature is smaller, applied force on the track becomes larger in the curved track without regard to laying of the continuos welded rail. On the while, the change of applied force on the track corresponding to the change of the cant is not so large.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.311-319
• /
• 2011

Track accompanies the process that track alignment by traffic loads is changed. A change of track alignment affects the running safety and riding comfort of train. This is called a track irregularity. The most important task in maintaining the track is to manage these track irregularity within quality parameters. Today, track maintenance of urban transit is enforcing immediate maintenance about section exceeding a safety standard by applying track recording data got through Integrated Measurement. This method is advantage of being easy of the maintenance assesment in case of the running safety, but is disadvantage of being difficult in case of the riding comfort of train. In this study, we propose track irregularity deviation of each track system depending on the time series and present about utilization plans of the Track Irregularity Progress Rate.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.840-845
• /
• 2008

To develop our original technology of concrete slab track, being widely accepted for new track, prefabricated concrete slab track, or precast concrete slab track has been developed. They have two different types according to slab shape and its dimensions, connection of slabs and connecting structure onto substructure. After the system design and successful performance evaluation in the laboratory, the trial installation on revenue line has been carried out. This paper is presenting the result of the trial installation and the performance tests in field. The performance tests have been performed as visual inspection for cracks and damages, measurement of track alignment and elastic behavior of track under passing trains. The performance test results during last 2 years have shown that no remarkable damages and settlements were found, and track alignment and elastic track behavior both exhibits good status.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.337-342
• /
• 2011

Vehicle dynamic behavior should be investigated to establish the track irregularity criteria because they have an impact on vehicle dynamic behavior. The influence of twist on running behavior and safety for KTX was instigated by numerical analysis among track geometry quality parameters such as vertical alignment, lateral alignment, twist and track gauge in this paper. The wavelength and amplitude of twist were considered in scenario of this numerical analysis. This research is based on just numerical analysis and the final result which include measurement will be published in the future.

• International Journal of Railway
• /
• 제2권3호
• /
• pp.118-123
• /
• 2009

Railway track alignment Standards set a minimum lenght value for straight and circular alignments (art. 5.2.9.), in order to ensure passenger ride comfort in railway vehicles of which dynamic oscillations will thus have to be limited. The transitions between alignments can cause abrupt changes (usually called discontinuities or singular points of the alignment) of curvature, of rate of change of curvature or of rate of change of cant. A passenger is likely to experience effects due to the excitation of the elastic suspension of the vehicle which generates oscillations that are damped as the vehicle moves away from the singularity. The amplitude of these oscillations should be adequately attenuated by the damping of the suspension system within the interval between two successive singular points, especially to avoid resonances. Therefore minimum lengths between two successive singular points are stated in alignment standards. Nevertheless, these nonnative values can be overly conservative in some cases. As an alternative, track alignment designers could try to assess how much the excitation has been attenuated between two successive singular points and thus assess at which point a new singularity may be present without affecting ride comfort. Although such assessment can be made with commercial SW packages which simulate the dynamic behavior of a vehicle considered as a set of rigid bodies interconnected with elastic elements simulating the suspension systems (such as SIMPACK, ADAMS or VAMPIRE), a simplified and user-friendly computation method (based upon the analytical solution of differential equations governing the phenomenon) is made available in this paper to track design engineers, not always used to working with full dynamic models.

• 한국정밀공학회지
• /
• 제27권8호
• /
• pp.7-12
• /
• 2010

When a vehicle is running, wheel is generating vertical and lateral force on the rail, in addition to load of vehicle, through a complicated set of motions. The derailment coefficient refers to the ratio of lateral force to vertical force(wheel load), and if the value exceeds a certain level, a wheel climbs or jumps over the rail. That's why the value is used as a criterion for running safety. Derailment coefficient of rolling stocks alters according to shape of rail track. I measured three-dimensional angular velocity and acceleration to use 3D Motion Tracker. Test result, derailment coefficient of rolling stocks and shape of rail track examined closely that have fixed relation. Specially, was proved that roll motion has the close coupling relation.

• 한국전산구조공학회논문집
• /
• 제30권6호
• /
• pp.507-514
• /
• 2017

건축분야에서 BIM이 널리 사용되면서, 토목구조물에 BIM을 적용하려는 노력이 최근 급속히 증가하고 있다. 그러나 기존 상용 BIM 소프트웨어의 기능은 건물 등의 건축물 중심으로 특화되어 있기 때문에 선형 중심의 토목구조물에 적용하기에 많은 어려움이 따른다. 본 연구에서는 철도 궤도부의 객체 정보를 관리하기 위하여 선형을 다룰 수 있는 소프트웨어와 BIM 소프트웨어간의 정보공유를 통해 캔트가 반영된 정보모델 생성방법을 제시하였다. 철도 궤도부 모델링은 궤도부 구조물을 연속 구조물과 비연속 구조물로 분류한 후, 연속 구조물을 선형 소프트웨어에서 생성하고, 이후 공유된 선형정보를 이용하여 비연속 구조물의 정보모델을 생성하는 절차로 이루어진다. 이 때 비연속 구조물은 BIM 소프트웨어에 전달한 이산화된 궤도 선형 및 캔트 정보를 바탕으로 비연속 구조물 각각의 위치, 회전 정보를 계산하는 알고리즘을 통하여 생성된다. 본 연구에서 제시한 방법을 오송 철도종합시험선로에 적용하여 그 실용성을 검증하였으며, 생성된 정보모델을 기반으로 명확한 객체 식별과 속성정보 추출 및 객체별 물량산출이 가능함을 확인하였다.

• 대한토목학회논문집
• /
• 제42권6호
• /
• pp.837-842
• /
• 2022

2013년에 개발된 지능형 철도선형계획 프로그램(ei-Rail)은 주로 해외의 신규 철도건설사업 사전 기획 분석 및 설계 결과 검증 등에 활용되어왔다. 그러나 한국 철도산업의 해외 진출 대상국인 개발도상국에서는 대규모 비용이 소요되는 신규 철도건설사업 보다는 기존 철도의 선형개량을 통한 증속, 또는 단선철도의 복선화 등의 사업이 보다 필요하고 실행가능성이 높은 것으로 판단되며, 이런 유형의 사업수요가 지속적으로 발생하고 있다. 이에 본 연구에서는 기존의 신규 철도건설 사업 분석기능 중심의 ei-Rail 프로그램에 철도복선화 사업 분석기능을 추가하고자, 철도 복선화사업 모듈을 개발하였다. 기존에 운행 중인 철도 선형자료를 기반으로 복선화 사업의 종류와 규모를 반영하고 대상 지역별 공종 단가를 적용하여 공사비를 산출하고 설계도면 제작을 자동화할 수 있도록 하였다. 그리고 해외의 사례 적용을 통하여 ei-Rail의 복선화 사업 분석기능을 검증하였다. 향후 해외를 대상으로 하는 철도 복선화 사업의 기획 및 분석결과 검증을 보다 효율적으로 수행할 수 있을 것으로 기대한다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3187-3194
• /
• 2011

Vehicle dynamic behavior should be investigated to establish the track irregularity criteria because they have an impact on vehicle dynamic behavior. The tilting train which have been developed in Korea will be operated on the conventional line. Therefore, it should be checked that the track irregularity criteria of conventional line is still available for the new vehicle. In this paper, the influence of alignment on running behavior and safety for tilting train was instigated by numerical analysis. The wavelength and amplitude of alignment were considered in scenario of this numerical analysis. This research is based on just numerical analysis and the final result which include measurement will be published in the future.