• Korean Journal of Veterinary Service
• /
• v.13 no.1
• /
• pp.1-20
• /
• 1990

In order to determine the levels of trace elements in livestock products surveys have been conducted in Inchon area. The samples were obtained from cattle organs, swine organs, chicken organs, eggs and milk. The levels of nine harmful trace elements(As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Zn) and three trace elements(Ca, Co, Na) were determined by ICP spectrometry, 1. In the survey on 9 harmful metals with 20 cattle, the highest level was 56.90ppm(Fe, liver) and the lowest level was 0.10ppm (Cd, muscle). 2. In the survey on 9 harmful metals with 31 swine, the highest level was 169.71ppm(Fe, lung) and the lowest level was 0.02ppm(Cd, heart). 3. In the survey on 9 harmful metals with 20 chickens, the highest level was 42.64ppm(Fe, liver) and the lowest level was 0.00ppm (Hg, entire organs). 4. In the survey on 9 harmful metals with 23 eggs, the highest level was 26.08ppm(Fe, yolk) and the lowest level was 0.00ppm (Hg, yolk and white). 5. In the survey on 9 harmful metals with 20 cases of milk, the highest level was 6.02ppm(Zn) and the lowest level was 0.04ppm(Cd). 6. In cattle the mean concentrations were highest in seven elements and in milk the mean concentrations were lowest in five elements.

• Animal Bioscience
• /
• v.34 no.8
• /
• pp.1350-1364
• /
• 2021

Objective: Adequate vitamin and trace mineral intake for pigs are important to achieve satisfactory growth performance. There are no data available on the vitamin and trace mineral intake across pig producers in China. The purpose of this study was to investigate and describe the amount of vitamin and trace minerals used in Chinese pig diets. Methods: A 1-year survey of supplemented vitamin and trace minerals in pig diets was organized in China. A total of 69 producers were invited for the survey, which represents approximately 90% of the pig herd in China. Data were compiled by bodyweight stages to determine descriptive statistics. Nutrients were evaluated for vitamin A, vitamin D, vitamin E, vitamin K, thiamine, riboflavin, vitamin B₆, vitamin B₁₂, pantothenic acid, niacin, folic acid, biotin, choline, copper, iron, manganese, zinc, selenium, and iodine. Data were statistically analyzed by functions in Excel. Results: The results indicated variation for supplemented vitamin (vitamin A, vitamin D, vitamin E, vitamin K, vitamin B₁₂, pantothenic acid, niacin, and choline) and trace minerals (copper, manganese, zinc, and iodine) in pig diets, but most vitamins and trace minerals were included at concentrations far above the total dietary requirement estimates reported by the National Research Council and the China's Feeding Standard of Swine. Conclusion: The levels of vitamin and trace mineral used in China's pig industry vary widely. Adding a high concentration for vitamin and trace mineral appears to be common practice in pig diets. This investigation provides a reference for supplementation rates of the vitamins and trace minerals in the China's pig industry.

• Journal of Environmental Impact Assessment
• /
• v.22 no.5
• /
• pp.491-511
• /
• 2013

In this study, three survey areas in Changnyeong, Miryang and Jinju of the confirmed the habitation of nutria and carried out the performance on the plant diet resource. From the habitat trace survey in the nutria habitat, a total of 336 trace points was shown. There were 181 trace points (54%) confirmed from St. 1 as the highest showing, followed by 52 trace points (15.4%) from St. 2, and 103 trace points (30.6)% from St. 3. The vascular plants distributed in the habitat area were a total of 182 taxonomic group with 57 families, 99 genus, 16 hybrids, and 1 race. The vascular plant living types in the habitat area are 1-year plant (Th, Th(w)) for 63class groups (34.6%), hemicryptophyte (H) for 42class groups(23.1%). plants, trees, crop plants were included. As a result of analyzing the overseas research cases on the diet plants of nutria, there are 195 taxonomic groups in a total of 39 families, 126 genus, 183 breeds, and 12 hybrids. In the study areas, feeding the plants was confirmed by the 7 taxonomic groups, aquatic plant, terrestrial From the total of 182 taxonomic groups discovered in the habitat area, 20 class groups, in 3 habitation region, 10 class groups of commonly appearing 49 class groups were shown to be the breed confirmed for diet in existing case studies, and assuming from it basis, the nutria habitating in the survey area is considered to have the supply of diverse diet resource to have flawless habitation. This is implication of having potential breeding possibility.

• Tunnel and Underground Space
• /
• v.21 no.5
• /
• pp.386-393
• /
• 2011

This study suggests an algorithm for estimating joint diameter distribution in rock mass from the joint trace length distribution around a circular tunnel. For estimating the joint diameter distribution, the concept of Joint Center Volume (JCV) suggested by Song. (2005) was applied and the calculation method of JCV for the cylindrical window survey was developed by using the complete survey method. The estimated joint diameter distribution was verified against the original joint diameter distribution by Monte-Carlo simulation. It was observed that the estimated joint diameter distribution was converged to the original joint diameter distribution with less than 20% of error.

• Tunnel and Underground Space
• /
• v.26 no.3
• /
• pp.201-211
• /
• 2016

A method for estimating rock joint size distribution using contained traces length distribution from 3D cylindrical window survey was suggested. To reduce the numerical error, an improved technique was applied. The accuracy was verified by referring to Monte-Carlo simulation and it was found that the error can be decreased with suitable gamma values.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.15 no.2
• /
• pp.157-164
• /
• 2009

The metals such as Al, Ag, Au, Cu, Cd, Co, Fe, Ni, Pb, Zn, etc are present at very low concentration in seawater and are classified as so-called trace metals. Whiles some of them are used in metabolism of living organism as a micronutrient, they may show toxic effects on organisms in case of a limited threshold concentration of them Plenty of studies on trace metals have been performed bemuse trace metals have a persistent influence and an adverse effect on marine environment and ecosystem. For long years, when the concentration of trace metals in natural waters such as seawater and fresh water are measured with high precision and accuracy, some systematic errors have been recognized to be present in measurements. Since 1975 in US and European countries, the measured concentration of trace metals in seawater have been found to be lower by factors of 10-1,000 than the previous data of trace metals measurements and the vertical profiles of the measurements have been shown to reflect well-known biological, physical and geochemical processes. These results are attributed to great advances in analytical instrumentation and methodology for trace metals measurements. Precautions against the contamination of samples are required to be taken in the process of sampling, storage, and analysis of samples. However, in Korea, erroneous data of trace metals with regard to ocean and marine environment related survey and investigations are reported The lock of exact understanding and information regarding precautions in sampling, storage and analysis of samples lead to the deterioration of data quality, especially in the analysis of trace metals. The major procedures to obtain the accurate data of trace metals in natural waters are introduced for applying to the study and assessment of marine environments.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1999.10a
• /
• pp.147-152
• /
• 1999

Distribution of fracture system is an important factor to analyse instability of jointed rock slope. In the most case of rock slopes, joint distribution properties are related to potential, shape, size and locality of slope failure. The purpose of this paper is to present an application of fracture characterization related to rock slope failure. Fracture data used in this study are collected by scanline survey. Two aspects of fracture characterization for rock slope are handled in this study First, In order to determine the potential and shape of slope failure, trace length of joints is considered as the weighting factor about collected orientation data. Second, Relationship between trace length and spacing is analysed to estimate failure location and size. The distribution of fracture system is directly influenced on wedge failure. It is effective to analyse the orientation of fractures by using weighting factors associated with the trace length of fractures rather than to analyse only that of fractures. It gives a conclusion that the wedge failure occurred along the peak of fracture density(or intensity) cycles.

• Toxicological Research
• /
• v.28 no.1
• /
• pp.67-71
• /
• 2012

Trace uranium detection measurement was performed using DNA immobilized on a graphite pencil electrode(DGE). The developed probe was connected to the portable handheld voltammetric systems used for seawater analysis. The sensitive voltammogram was obtained within only 30 s accumulation time, and the anodic stripping working range was attained at 100~800 ${\mu}g/l$ U and 10~50 ${\mu}g/l$. The statistic relative standard deviation of 30.0 mg/l with the $15^{th}$ stripping was 0.2115. Here, toxicological and analytical application was performed in the seawater survey in a contaminated power plant controlling water. The results were found to be applicable for real-time toxicological assay for trace control.

• Applied Biological Chemistry
• /
• v.23 no.3
• /
• pp.184-188
• /
• 1980

A survey of pesticide and copper residues of the citrus orchard soil was conducted during October 1979-June 1980 in Jeju, Seogwipo county. The citrus orchards were classified into five groups according to different cultivated period; 5 year orchard, 10 year orchard, 15 year orchard, 20 year orchard, and 30 year orchard. Each of the above samples was divided again to three layers of soil depth; the surface layer$(0{\sim}10cm)$, the middle layer $(10{\sim}20cm)$, and the bottom layer $(20{\sim}40cm)$. In this experiments, Kelthane and Akar, as well as copper residues were detected in all soil samples. Residue levels of above chemicals were increased in soils of orchard with longer cultivation periods, and at the same time, decreased with soil depth. The residues of those ranged as follows; a) from trace to 1.359ppm in Kelthane, b) from trace to 0.925ppm in Akar, and c) from trace to 40.734ppm in copper. It is noted that the average residues of Kelthane was 0.251ppm, Akar, 0.120ppm, and that of copper was 2.168ppm, respectively.

• Tunnel and Underground Space
• /
• v.29 no.2
• /
• pp.89-107
• /
• 2019

Rock joints have an extremely important role in analyzing the mechanical stability and hydraulic characteristics of rock mass structures. Most rock joint parameters are generally indicated as a distribution by statistical techniques. In this research, calculation technique of Joint Center Volume (JCV) is analyzed, which is required for estimating the size distribution having the largest uncertainty among the joint parameters, then a new technique is proposed which is applicable regardless of the shape of survey window. The existing theoretical JCV calculation technique can be applied only to the plane window, and the complete enumeration techniques show the limitations in joint trace type and analysis time. This research aims to overcome the limitations in survey window shape and joint trace type through calculating JCV by using Monte Carlo simulation. The applicability of proposed technique is validated through the estimation results at non-planar survey windows such as curved surface and tunnel surface.