• Journal of Korea Foundry Society
• /
• v.22 no.4
• /
• pp.192-199
• /
• 2002

Dimensional defects of castings are mainly due to the stresses and strains caused by a nonuniform temperature distribution and phase transformation during solidification and cooling, and by mechanical constraint between the mold and casting. It is, however, nearly impossible to trace movements of the casting and mold during solidification and cooling by experimental measurements for castings with complex shape. Two and three dimensional deformation analyses of the casting and the mold were performed using commercial finite element code, MARC. It was possible to calculate deformation and temperature distribution in the casting and mold simultaneously. Cooling curves of the casting obtained by calculation were close to that measured in the field since it was possible to treat latent heat evolution of the casting which could be divided into two parts, primary and eutectic parts. Mold bent inward just after pouring due to the temperature gradient across the mold thickness, and mold returned to its previous position with time. Plastic deformation occurred at the part of the casting where solidification was slow.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.10 no.2
• /
• pp.11-22
• /
• 1990

An automatic incremental algorithm for geometric non-linear finite element analysis of the structures subjected to the conservative and non-conservative forces is presented. By making efficient combination of the load incremental method and the displacement incremental method, this scheme can trace various post-buckling equilibrium path such as snap-through and turning-back. Several numerical examples to demonstrate the feasibility of the present algorithm, over ranges of deformation that are well beyond those likely to occur in practical structures, are given and discussed.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.164-171
• /
• 1999

An optimum blank design technology is required for near-net of net-shape cold forming using sheets. Originally, the backward tracing scheme has been developed for preform design in bulk forming, and applied to several forming processes successfully. Its key concept is to trace backward from the final desirable configuration to an intermediate preform of initial blocker. A program for initial blank design in sheet forming which contains the capabilities of forward loading simulation by the finite element method and backward tracing simulation, has been developed and proved the effectiveness by applying to a square cup stamping process. In the blank design of square cup stamping, the backward tracing program can produce an optimum blank configuration which forms a sound net-shape cup product without machining after forming. Another general application appears in the blank design of a cup stamping with protruding flanges, one of typical automobile components. The blank configurations derived by backward tracing simulation have been confirmed by a series of loading simulations. The approach or decision of an initial blank configuration presented in this study will be a milestone in fields of sheet forming process design.

• Wind and Structures
• /
• v.17 no.5
• /
• pp.495-513
• /
• 2013

Thin, high-strength steel roof cladding is widely used in residential and industrial low-rise buildings and is susceptible to failure during severe wind storms such as cyclones. Current cladding design is heavily reliant on experimental testing for the determination of roof cladding performance. Further study is necessary to evolve current design standards, and numerical modelling of roof cladding can provide an efficient and cost effective means of studying the response of cladding in great detail. This paper details the development of a numerical model that can simulate the static response of corrugated roof cladding. Finite element analysis (FEA) was utilised to determine the response of corrugated cladding subject to a static wind pressure, which included the anisotropic material properties and strain-hardening characteristics of the thin steel roof cladding. The model was then validated by comparing the numerical data with corresponding experimental test results. Based on this comparison, the model was found to successfully predict the fastener reaction, deflection and the characteristics in deformed shape of the cladding. The validated numerical model was then used to predict the response of the cladding subject to a design cyclone pressure trace, excluding fatigue effects, to demonstrate the potential of the model to investigate more complicated loading circumstances.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.35 no.8
• /
• pp.139-148
• /
• 2019

The lightweight structures such as domes are particularly vulnerable when it has been subjected to high temperature induced by the fire. It is therefore crucial to predict the possible instability path of structures exposed to the fire in structural design process. In this study, the instabilities of single-layer domes is investigated by using finite element technologies with the consideration of high temperature. The material properties of members under high temperature are considered by using the reduction factors which is provided in Eurocodes 3. Some damage patterns are assumed with use of a structural unit which is symmetric in radial direction. For numerical evaluations, the geometrically nonlinear truss element is implemented and the arch-length control method is employed to trace the post-buckling behaviour of domes. From numerical results, it is found to be that a significant change of post-buckling behaviour is detected in dome structures when structural members are exposed to the fire.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2005.11a
• /
• pp.67-74
• /
• 2005

Microbeam PIXE, often called micro-PIXE, is a powerful tool tot analyzing a wide range of elements for various samples, as well as, it has important applications of interest to the atmospheric science. In this study, qualitative elemental imagination for various atmospheric environmental species was attempted using micro-PIXE. Here, we present the results of an application of micro-PIXE to the study of atmospheric environment. The detailed spatial resolution of multiple elements lot various samples like individual ambient particles, individual raindrops, individual fog droplets, and individual snow crystals could be successfully achieved by scanning 2.6 MeV H+ micro beam (1-2 ${\mu}m$) accelerated by 3 MV single-end accelerator.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.14 no.2
• /
• pp.125-140
• /
• 2010

This paper develops a least-squares approach to the solution of the optimal control problem for the Navier-Stokes equations. We recast the optimality system as a first-order system by introducing velocity-flux variables and associated curl and trace equations. We show that a least-squares principle based on $L^2$ norms applied to this system yields optimal discretization error estimates in the $H^1$ norm in each variable.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.2
• /
• pp.160-170
• /
• 2002

Retroreflective article is different from other reflecting objects as it returns the incidence ray to the near of its source. This characteristic makes the retroreflectors have many applications in reflective highway signs, reflective vests, and other safety-relaxed items. These articles may have various shapes. However, the quantitative evaluation of performance for the best shape of retroreflector needs much time and cost for manufacturing prototypes and for performance experiments. In this work, we have developed a program for simulating the trace of ray entered into a retroreflective element, in order to determine the optimal shape of retro-reflection. We have also proposed new performance criterion of retroreflective articles, which can confide the range of incidence angle, instead of the criterion with the merely retroreflective strength.

• Journal of environmental and Sanitary engineering
• /
• v.6 no.1
• /
• pp.47-62
• /
• 1991

Yellow Sand Phenomena was observed from April 8 th to 10 th in 1990. During this period particle was collected to investigate the chacteristics of chemical composition of particulate by High Volume Air Sampler and Andersen Air Sa~npler in Seoul. During this period the particle concentration was 350 yg/$m^3$ and the anions, cations, and metal concentrations were increased and the orders of these were $S0_4\;^{-2}>N0_3\;^->Cl^->F^-, Na^+>Ca^{+2}>NH_4\;^+>Mg^{2+}>K^+$, and Fe>Al>Si>Zn>Pb respectively. The principal source of Yellow Sand were identified soil and sea salt. Mn used by the trace element of soil, the persentage of contribution from soil was calculated to be about 81.3% for the particle increased by Yellow Sand Phenomena. Also the principal chemical compounds of particle were estimate metals(Fe, Al, Si, Zn) oxides, $CaSO_4, NaSO_4, MgSO_4, NaC1, MgCl_2$ and $(NH_4)_2SO_4$.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.4
• /
• pp.201-215
• /
• 1994

Recent development in the immunochemical technique has resulted in a new ultrasensitive analytical method known as liposome immunoassay (LIA). Liposome is a key element in performing liposome immunoassays, specifically designed to participate in immune reactions. A variety of markers can be encapsulated in liposomes and used as quantitative indicators of reactions. Liposome immunoassay based on agglutination, complement-mediated Iysis, cytolysin-mediated Iysis, detergent-mediated Iysis or destabilization of the liposomal membrane have been reviewed. The quantity of markers released from liposomes should be proportional to the concentration of the analytes. Therefore, liposomal agglutination and Iysis which are essential to liposomal Iysis are critically reviewed to provide a better understanding of liposome immunoassay. Based on the literature review of recent advances in liposome immunoassay for bioactive substances, this assay method may provide a convenient, specific and highly sensitive method for detecting and measuring trace amount of clinically relevant substances in the future.