• Analytical Science and Technology
• /
• v.16 no.4
• /
• pp.325-332
• /
• 2003

To analyze co-planar PCBs in food, the isotopic dilution method by high resolution gas chromatography/high resolution mass spectrometry was applied. Among 209 PCB congeners, 12 congeners (#77, #81, #126, #169, #105, #114, #118, #123, #156, #157, #167 and #189) were chosen as target compounds that were toxic congeners re-assessed by WHO in 1998. Milk and milk products including cheese and butter were collected as food samples. Samples were homogenized, spiked with the known amount of the standard mixture and extracted. After extraction, extracts were cleaned up by sulfuric acid impregnated silica gel, purified on silica gel and alumina column chromatography and then analyzed by HRGC/HRMS. As results, the overall recoveries were ranged from 83% to 106% and the limit of detection was about 0.1 pg/g at signal/noise>3. Levels of targets in the selected food samples were 0.001~0.107 pgWHO-TEQ/g.

• Journal of Environmental Health Sciences
• /
• v.46 no.5
• /
• pp.555-564
• /
• 2020

Objectives: To identify and investigate through qualitative and quantitative analysis the hazardous substances generated when compressed wood was burned at a live fire-training center. Methods: Four types of compressed wood that are actually used in live fire training were burned in a chamber according to KS F2271. The gaseous material was sampled with a gas detector tube and conventional personal samplers. Results: 1,3-butadiene, benzene, toluene, xylene, formaldehyde, hydrogen chloride, hydrogen cyanide, ammonia, carbon monoxide, and nitric acid were detected. In particular, 1,3-butadiene (497.04-680.44 ppm), benzene (97.79-125.02 ppm), formaldehyde (1.72-13.03 ppm), hydrogen chloride (4.71-15.66 ppm), hydrogen cyanide (3.64-8.57 ppm), and sulfuric acid (3.85-5.01 ppm) exceeded the Korean Occupational Exposure Limit as measured by sampling pump according to the type of compressed wood. Conclusions: We found through the chamber testing that firefighters could be exposed to toxic substances during live fire training. Therefore, firefighter protection is needed and more research is required in the field.

• KSBB Journal
• /
• v.23 no.5
• /
• pp.381-386
• /
• 2008

Lipophilic ammonia is toxic gas and can easily diffuse across cell membranes. Excess ammonia is implicated in the pathogenesis of several metabolic disorders including hepatic encephalopathy and may result in the death. The purpose of this study was to clarify the inhibition effect of metronidazole on liver cell damage due to ammonia in human Hep G2 cell and rat hepatocytes. The effects of metronidazole were studied in ammonium chloride treated human Hep G2 cell (75 mM) and rat hepatocyte (100 mM) following $0.1{\mu}M$ metronidazole treatment. In MTZ+AC group, cell viabilities increased prominently and LDH activities decreased over 25% than AC group. Furthermore, ammonia level according to ammonium chloride treatment reduced over 30% and lipid peroxidation as an index of cell membrane damage decreased more than twice. By comparison with control, catalase activity showed more than 30% reduction in AC group while less than 10% reduction in MTZ+AC group, respectively. In addition, MTZ+AC group showed the similar cell structure as control in cell morphology study by using light microscope, and represented fluorescent intensity decrement compared with AC group in fluorescent microscopic study with avidin-TRITC fluorescent dye. And cleaved PARP expression due to ammonia reduced twofold or more in MTZ+AC group. As the results suggest, metronidazole may protect the liver cell by inhibiting cell damages due to ammonia and be used for an effective antagonist of ammonia in hyperammonemia.

• Journal of Fashion Business
• /
• v.16 no.3
• /
• pp.13-31
• /
• 2012

The purpose of the study was to analyze the work clothes' clothing comfort and wearer mobility of painting workers with the consideration of the work environment features in the machine and shipbuilding industries in South Korea. A questionnaire survey was conducted for the study, which consisted of questions on the clothing comfort and wearer mobility aspects of painting work clothes by clothes types and body parts. The work clothes' clothing comfort and wearer mobility levels were scaled in 5 points i.e. 1(: very tight/very uncomfortable) to 5(: very slack/very comfortable). The painting work environmental hazardous features were considered as high impact levels of workplace temperature, oxygen deficiency, organic solvent, toxic gas factors while metal fragment factor only impacts 'low' in the painting processes with the findings throughout this study. Since the painting work consisted of surface washing and the spray and touch-up painting processes, which was carried out in an outdoor work place, the painting work clothes should meet high performance of waterproofing from the painting material and air permeability specially in summer as well as thermal performance in winter. The subjects painting workers' assessment of the existing work clothes' clothing oppression was in the levels between 3 (i.e. moderate) and 4 (i.e. comfortable) in a range of 1 to 5 points. The existing painting work clothes' wearer mobility was evaluated 'very uncomfortable' in all work clothes parts, especially, armhole length, biacromial breadth, sleeve length of the jumper; and body rise, waist, hip, thigh and knee circumferences of the pants.

• Fire Science and Engineering
• /
• v.30 no.2
• /
• pp.7-18
• /
• 2016

This study evaluated the toxicity of the burning gas from the synthetic wood products used in housings or warehouses. The combustion products of five materials, viz. impregnated laminated board, MDF, Douglas fir plywood, core plywood, and Lauan retardant, were analyzed using SEM, FTIR and a Cone Calorimeter. For the Lauan retardant, 256,965 ppm of carbon dioxide ($CO_2$) and 1,475 ppm of sulfur dioxide ($SO_2$) were measured, which are 2.5 times and 3.6 times as high as their lethal concentrations of 100,000 ppm and 400 ppm, respectively. For the impregnated laminated board, 1,569 ppm of nitrogen dioxide ($NO_2$) was measured, which is 6 times as high as its lethal concentration of 250 ppm. For MDF, 795 ppm of ammonia ($NH_3$) was measured, which is higher than its lethal concentration of 750 ppm. As a result, most internal-finishes generated toxic combustion products at levels higher than their lethal concentrations, which underlines the importance of the selection and manufacturing of internal-finish materials.

• ALGAE
• /
• v.19 no.1
• /
• pp.7-14
• /
• 2004

Blue-Min was initially developed as an adsorbent for harmful gas removal and recently improved to apply to livestock, agriculture and aquaculture as an assistant feed. In the Blue-Min treatment, growth of harmful algae (Cochlodinium polykrikoides and the others causing the red-tide in the ocean) were inhibited below 10% in comparison with control and coagulation removal of harmful alge with Blue-Min treatment was more efficient than that of yellow loess treatment. It would be expected that the Ble-Min can be useful for the extirpator against the red-tide organisms and restrain the toxic algal growth around the fish aquaculture using the assistant feed. Recently, its utility has become to be diverse as it was revealed that aquaculture productivity increase by its application and, in addition, that it improve the water quality or sediment conditions in the aquaculture of Chinese White Shrimp. When Blue-Min was treated with the proper dose, the growth inhibition of Microcystis aeruginosa and lsochrysis galbana, which are typical red-tide organisms in freshwaters and food organisms in aquaculture, respectively, were less than that of marine red-tide organisms, while their growth slightly increased with low concentration treatiment. In addition, polyunsaturated fatty acids (PUFA) content of I. galbana slightly increase with the Blue-Min treatment. Through our research, the Blue-Min has diverse and comples function against various biological organisms and is proved as a biological activator or depressor.

• Journal of the Korean Society of Tobacco Science
• /
• v.12 no.1
• /
• pp.19-27
• /
• 1990

To evaluate tobacco quality, several mathods including sensory test, or measurement of some toxic compounds such as tar, nicotine and carbon monoxide in cigarette smoke have been used. However, many detrimental effects of smoking on the physiological functions including respiratory system reported were turned out to be the action of reactive oxygen species. Therefore, the amounts of oxygen free radicals such as superoxide, hydroxyl radical, even hydrogen peroxide in the cigarette smoke are thought the very important factors. In the present study, we have determined the generation of superoxide and the content of hydrogen peroxide using superoxide dismutase and catalase in the gas and particulate phases obtained from cigarette smoke, respectively. In the aqueous extracts of total particulate materials, suproxide and hydrogen peroxide were detected, and there was an excellent correlation between oxygen tint of oxygen free radicals in cigarette smoke may be a useful index for evaluation of cigarette quality in the aspect of smoking and health.

• Korean Journal of Veterinary Research
• /
• v.48 no.1
• /
• pp.39-48
• /
• 2008

Polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) are ubiquitous and can contaminate the food chain. A study monitoring PCDD/Fs in imported meat was conducted at the National Veterinary Research and Quarantine Service (NVRQS, Republic of Korea) in order to maintain food safety from the bioaccumulative PCDD/Fs. Seventeen PCDD/Fs with toxic equivalency factors (TEFs) established by World Health Organization (WHO, 1998) were analyzed in imported beef, pork, and chicken by high resolution gas chromatography/mass spectrometry (HR-GC/MS). Results of the monitoring for the last 5 years are presented. The levels of PCDD/Fs were similar to other studies except two unusually high concentrations in pork and beef. Excessive levels greater than the Korean provisional maximum residue limit of PCDD/Fs were found in a sample of pork imported from Chile and a sample of beef imported from U.S, and those products were rejected and returned. There was no obvious trend or differences with respect to time or origin of meat in this study.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.8-13
• /
• 2008

Emissions from automobiles have long been considered a prime source of pollutants involved in smog formation and ozone production. Especially VOCs are associated with serious environmental problems such as photo-chemical smog as well as human health effects. Since motor vehicles are a major source of VOCs, estimating of emission from mobile source is the most important factor to control VOCs. VOCs are emitted from various pollution like motor vehicles, mobile and stationary source that has characteristics of toxicity, cancer-causing, bio-accumulation, durability in air and diffusion can exert a bad influence upon human health and environment. However we don't have any standard or regulation about VOCs emissions. This study is summarized as VOCs emission characteristics from in-use light-duty diesel and LPG fueled vehicles. The vehicle exhaust-gas test mode is CVS cycle and nier-10 cycles that developed on EPA and National Institute of Environmental Research. TO-14 method (Toxic Organic) was chosen for VOCs analysis from EPA in USA. This study results will be useful when make a emission factor and rule making of emission standard about domestic VOCs emission for the improve to air condition.

• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.323-327
• /
• 2005

Pentachlorophenol (PCP) is a representative compound of chlorophenol derivatives which are especially toxic and potentially carcinogenic compounds in the priority pollutant list of the EPA (Environmental Protection Agency, USA). The aim of this study was to investigate an analysis method of PCP in infinitesimal quantity retained in paper. PCP in paper was pretreated by solid phase extraction (SPE) in a phenyl cartridge. The extracted sample was acetylated or silylated and analyzed with GC/MS-SIM. The detection sensitivity of silylated PCP was improved significantly when compared with those of PCP itself and acetylated PCP. As a test specimen, an office paper and a wallpaper were used.