• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.2
• /
• pp.113-121
• /
• 2005

How to extimate the angle of attack of a vertical V-type cambered otter board was described. A three-dimensional semi-analytic treatment of a towing cable system was applied to the field experiments of a midwater trawl obtained by the Scanmar system. Also the equilibrium condition of the horizontal component and vertical component of forces and moment around the otter board was used. When the warp length was 300m long and the towing speed was between 2.61 and 3.86 knots, the estimated angle of attack of the otter board was ranged between $24.7^{\circ}$ and $26.2^{\circ}$, though the maximum lift force was at the angle of attack $22^{\circ}$.

• Korean Journal of Ecology and Environment
• /
• v.53 no.4
• /
• pp.365-373
• /
• 2020

Biomonitoring Survey and Assessment Manual for lake ecosystem suggest zooplankton collection methods to compare relatively the number of species, population density, and community indices, taking into account the convenience of the field sampling according to the sites' water depth. In this study, the oblique towing and 20 m vertical towing methods presented in the manual were respectively compared with the whole water column-vertical towing and we analyzed the differences and characteristics of zooplankton community information gathered by each collection method. For community indices, there was no difference in the comparison of oblique/vertical towing methods in the shallow lake, but in the deep lake, the diversity and richness indices increased when vertically towing through whole water column rather than when limiting the towing depth to 20 m. In addition, the total zooplankton density collected by the oblique/20 m vertical towing methods was about three times higher than the whole water column-vertical towing method, which means that the density of zooplankton community can be overestimated depending on the collection methods. It appears to be results of differences in the zooplankton density by water layer arising from their vertical distribution and in filtered raw water quantity according to the towing depth/distance. Hence, for zooplankton community information to be used as a functional quantitative indicator representing the entire lake, it would be more appropriate to apply the whole water column-vertical towing method with considering the distribution of zooplankton density by depth and contribution rate of each water layer when converting total zooplankton density.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.2
• /
• pp.140-149
• /
• 2008

This study evaluated the efficiency of an oil fence and spreading devices for one vessel in a towing tank. A series of model experiments and numerical calculations were conducted using an existing oil fence for two vessels and a new method for one vessel. Models of the oil fence and spreading devices were constructed on $1/20^{th}$ scale from waterproofed nylon fabric and canvas. The tensions acting on the model of the oil fences and the horizontal distance between the spreading devices were calculated numerically while the oil fences were being towed. The results were extremely close to the results of the model experiments. The ratio of the opening width to the total length of the oil fence, which shows the efficiency of the oil fence for one vessel, was 49.7% in 0.4 m/sec. Therefore, the proposed oil fence system should be very useful for oil containment at sea. As the opening width of the oil fence is not proportional to the length of the towing rope, it may be reasonable to maintain the towing rope at approximately 100 m. Furthermore, a reasonable towing speed, when operating the oil fence for one vessel equipped with spreading devices, was within 0.4 m/sec.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.59 no.4
• /
• pp.344-353
• /
• 2023

In the actual sea, the additional resistance due to external force such as wind, current and wave is accompanied, and the required power is added in response to these resistance. Especially when the ship is sailing at low speed, the effects of wind and current have a great impact on the safe control of the ship. Likewise, it is thought that the effects of wind and current have a great impact on the trawl ship control since the towing speed of a bottom trawl ship is a low speed of 3 to 4 knots. If the reduce of ship speed and the increase of engine power due to the influence of wind and current can be identified, the safe towing power can be calculated based on a given engine output. Thus, the appropriate size of a fishing gear can be determined. In this study, a total of 20 trawl operations were conducted for seasonal maritime research in the same research area according to the operation mode of propeller. Based on navigation data, trawl fishing data, and engine performance data acquired during the towing fishing gear, and data of ship speed, hull resistance, fishing gear resistance, wind force and current force according to an incidence angle were estimated. The overall power for these loads was calculated and compared with the measured engine power, and the effects of wind force and current force on the engine power were investigated.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.3
• /
• pp.179-187
• /
• 2005

This study was conducted in order to the experiment of bottom trawl fisheries in the sea mount of central northern pacific($30^{\circ}-40^{\circ}N$, $170^{\circ}-175^{\circ}E$), during the period of July 1 to August 25, 2004 by commercial trawl ship. Fishing experiment was carried out by bottom trawl, with the codend of 110mm mesh size. The number of 101 test fishing was done in the sea mount of central northern pacific during 56 days and the total catches were 198,593kg as 18 fish species, and CPUE/day and catches/day were 8.3 hours towing time and 3,546kg. Catch ratio according to each fishing ground was higher with the order of B, C, and E, and catches for B was 7,171.0kg during the towing time of 13.2 hours. Main target species were Pseudopentaceros richardsoni and Beryx splendens, there was 14.9% of damage ratio for fishing gears on catching the target fishes inhabiting on the rough sea bottom. Catches by water depth was the order of 300m below, 301-350m, 451-500m and 351-400m. It is thought that there was no problem on the mesh size because most of fishes caught from the experimental fishing was 30cm over.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.60 no.1
• /
• pp.27-36
• /
• 2024

The towing distance, which is speed over the ground, and the water flow quantity, which is speed through the water, were used when estimating the amount of Metapenaeus joyneri resources that rose to the surface at night using the swept area method in order to compare and analyze the difference. It was conducted using a shrimp dredge, trial fishing gear for catching Metapenaeus joyneri. Catch during the entire survey period was 188.9 kg. Monthly catch ranged from 3.1 to 109.2 kg, highest in June and lowest in September. The swept volume calculated using the speed over the ground was about 13% higher than using the speed through the water. Metapenaeus joyneri resources estimated using the towing distance ranged from 320.1 to 14,649.8 kg. Resources estimated using the water flow quantity ranged from 278.5 to 12,886.3 kg. Therefore, the amount of Metapenaeus joyneri resources estimated using the speed over the ground was about 14% higher than the method using the speed through the water, indicating that the amount of resources was overestimated.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.41-46
• /
• 2005

It have been known that the probability of accidental happening in towing-barge is higher than that of other merchant vessels. Because the towing-barge is restricted in thier manoeuvring ability due to its towingline. A report from ministry maritime affairs and fisheries said that the rate of collision accident for towing-barge is $40\%$ high tlnn other transport system in sea. A number of researches have been carried out to improve the safety policy in the towing-barge sea transportation system by the gorvernment. This study examined the safety status in domestic towing-barge sea transportation system The registration status, safety operational policy and post accidental data were also examined A survey research of experts relating to towing-barge operation also was carried out to find the detailed of safety status. This study would be applicable to set up safety policy for towing-barge marine transportation system.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.1 s.24
• /
• pp.61-66
• /
• 2006

It have been known that the probability of occidental happening in towing-barge is higher than that of other merchant vessels. Bemuse the towing-barge is restricted in thier manoeuvring ability due to its towingline. A report from ministry maritime affairs and fisheries said that the rate of collision occident for towing-barge is 40% high than other transport system in sea A number of researches have been carried out to improve the safety policy in the towing-barge sea transportation system by the gorvenment. This study examined the safety status in domestic towing-barge sea transportation system The registration status, safety operational policy and past occidental data were also examined A survey research of experts relating to towing-barge operation also was carried out to fine the detailed of safety status. This study would be applicable to set up safety policy for towing-barge marine transportation system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.211-216
• /
• 2013

Most of hull resistance prediction methods which are used to calculate the towing force of disabled ships are very simple and old-fashioned. In particular, in cases of barge ships, a method similar to the US Navy Towing Manual is being used. This paper reviewed the US Navy Towing Manual and the notification method of Korea Ministry of Oceans and Fisheries and proved that these prediction methods are irrational and inaccurate. Furthermore, a new Modified-Yamagata-Barge method is introduced as a more rational and accurate resistance prediction method which can be applied in case of barge ships.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.4
• /
• pp.446-455
• /
• 2017

The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance ($C_R$) in the total resistance ($C_T$) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.