• The Journal of the Acoustical Society of Korea
• /
• v.21 no.5
• /
• pp.478-484
• /
• 2002

Linear towed arrays (LTA) have a nonlinear shape due to tow vessel motion, ocean swells and currents. By reasons of nominally linear shape, various towed array shape estimation techniques have been developed since the perturbed shape cause the error in target detection. In this paper,, we propose the beamforming method for the perturbed LTA with simple structure. The proposed method linearizes a nonlinear phase of steering vector with position information measured by two reference sensors. It can be proved using some properties of Markov transition matrix, and iteration number of linearization process is decided by variance of cross phase difference. As a result of computer simulation in the ocean environment, beampattern of the proposed method is almost same with the ideal case in my type of array shape. In the signal-to-noise ratio (SNR) performance simlation, the DOA estimation performance of the proposed beamforming method is evaluated, and the comparison with Bartlett beamformer of the LTA shows that the proposed method can estimate. the spatial characteristic of sources more accuracy.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.2
• /
• pp.162-168
• /
• 2016

This study attempted to help determine Korean fishery policies by proposing improvement plans after examining the current regulations, fishing vessels, fishing gear and fishing methods of the middle sized trawl fishery in the East Sea for targeting only squid. In general, the size, engine horse power, and net length of the middle sized trawlers are between 50 and 60 GT, 1,200 and 1,600 PS, and approximately 165 m with four seamed trawl nets, respectively. While a jigging vessel attracted squids using lights, the trawler approached a jigging vessel. The trawler let the jigging vessel know its decision for fishing, and then jigging vessel rolled up jigs. The net of the trawler was casted at 45 degrees between the bow and the stern of the jigging vessel. Once the trawler towed close to the stern of the jigging vessel upon its passing of the jigging vessel, the bow of the trawler turned 45 degrees left again. Then, squid aggregations were entered into the net. When the cod end was passed a light vessel, the trawler hoisted the net up to the otter board. Then the trawler turned 180 degrees. It repeated three to five times of fishing operations as the previous method. We recommend that the regulations allow nineteen side trawlers to catch like stern trawler, as well as the cooperative trawler and jigging vessel operations.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.26 no.1
• /
• pp.74-81
• /
• 2017

A crane is typically used as a means to lift and load equipment or materials. A surface vessel uses a towed object for underwater activity. Such a mechanism for dropping and lifting of equipment is necessary, and is called an overboarding unit. The present study is focused on the overboarding unit used for a crane structure. This paper deals with new overboarding mechanism design and GA-based $MATLAB^{(R)}$ optimization. By using a quadrilateral link mechanism, it is possible to set the constraint function for optimizing the GA method. The optimization with $MATLAB^{(R)}$ is followed by the $SolidWorks^{(R)}$ simulation and verification. When applying the proposed mechanism, the operator is expected to have a big advantage in safety and efficiency of operations. Furthermore, the technology developed in this study will be helpful in similar circumstances and in the proposed mechanism.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.1
• /
• pp.67-73
• /
• 2013

This paper presents the results of a numerical study on the towing stability of barges. Towing simulations were carried out by using two different numerical models (MMG model and cross-flow model). Stability criteria are also suggested based on the analysis of the linearized governing equations for towed vessel motion. In order to validate the present numerical models, the experimental data of Yasukawa et al. (2006) were used. Simulations were conducted for single and double barges under constant towing speed and direction conditions. The time histories of the heading angle, yaw rate, and towline tension were compared between the numerical results and experiments. The effects of the towline length on the slewing frequency and maximum heading angle were also observed. In addition, a series of numerical simulations using variable hydrodynamic coefficients were performed to investigate the effects of the hydrodynamic forces on the towing stability.

• International Journal of Ocean System Engineering
• /
• v.1 no.4
• /
• pp.211-221
• /
• 2011

Tugboats are widely used near harbors to assist with various operations such as the berthing and deberthing of very large vessels and the towing of barges. Capsizing accidents involving tugboats occasionally take place when the tugboat makes rapid turns in harsh weather conditions. When there is little evidence suggesting how the accident occurred and when the crew members are missing, it is necessary to predict the time history of the towing vessel’s attitude and trajectory from its departure point to when and where it capsized, depending on various input parameters using a numerical simulation. In this paper, the dynamics of a tugboat and a towed barge in conjunction with the external force and moment were established, and the possible input parameters and operational scenarios which might influence the large roll motion of the tugboat were identified. As a result of analyzing the simulated time history of the excessive roll motion of the tugboat, it was found that roll motion can take place when the tugboat is situated on the crest of a wave and when it is pulled by a towed barge through a towing line. The main cause of the accident would be the parameters that primarily influence such situations. These are the wave parameters, course changing scenario, and the amount of tension.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.4
• /
• pp.347-354
• /
• 2007

This paper describes on the real-time monitoring of net setting and hauling process for fishing operations of Danish seine vessels in the southern waters of Korea as an application of a PC based ECDIS system. Tracking of fishing process was performed for the large scale Danish seine vessel of G/T 90 and 350 PS class using the fishing gear which the length of net, ground rope, head rope and sweep line including warp in both sides were 86m, 104m, 118m and 3,200m, respectively. Tracking information for net setting and hauling process was continuously recorded for 23 fishing operations performed on November and December, 2003. All measurement data, such as trawl position, heading, towing course and past track which was individually time stamped during data acquisition, was processed in real time on the ECDIS and displayed simultaneously on the ENC chart. The results indicated that after the separation of a marker buoy from Danish seiner, the averaged running speed of vessel and the averaged setting period while shooting the seine on the course of diamond shape to surround the fish school in the 23 fishing operations were 8.3 knots and 13.1 minutes, respectively. And with the maker buoy taken on board, the averaged running speed of vessel and the averaged towing period while closing the seine on the straight route was 1.0 knots and 47.0 minutes, respectively. After the closing stage of hand rope, the hand rope was towed by the averaged speed of 2.2 knots during the 13.0 minutes. The average area for route of diamond shape swept by sweep lines of the seine in 23 fishing grounds was $709,951.6m^2$. Further investigation is also planed to provide more quantitative tracking information and to achieve more effective surveillance and control of Danish seine vessels in EEZ fishing grounds.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.2
• /
• pp.140-149
• /
• 2008

This study evaluated the efficiency of an oil fence and spreading devices for one vessel in a towing tank. A series of model experiments and numerical calculations were conducted using an existing oil fence for two vessels and a new method for one vessel. Models of the oil fence and spreading devices were constructed on $1/20^{th}$ scale from waterproofed nylon fabric and canvas. The tensions acting on the model of the oil fences and the horizontal distance between the spreading devices were calculated numerically while the oil fences were being towed. The results were extremely close to the results of the model experiments. The ratio of the opening width to the total length of the oil fence, which shows the efficiency of the oil fence for one vessel, was 49.7% in 0.4 m/sec. Therefore, the proposed oil fence system should be very useful for oil containment at sea. As the opening width of the oil fence is not proportional to the length of the towing rope, it may be reasonable to maintain the towing rope at approximately 100 m. Furthermore, a reasonable towing speed, when operating the oil fence for one vessel equipped with spreading devices, was within 0.4 m/sec.

• 한국전산유체공학회:학술대회논문집
• /
• 2009.04a
• /
• pp.196-201
• /
• 2009

Global warming issues due to the $CO_2$(Carbon Dioxide) become increasing since the Industrial Revolution. After the Kyoto protocol at 1997, nations which have the prearranged quota drives their national project for the reduction of $CO_2$. Korean Government start to the related big projects in the view of three concepts which have consist of the $CO_2$ exhaust reduction on land, $CO_2$ capture and $CO_2$ storage. Furthermore, the storage method putting into depleted region underground is accepted by the London Convention while the ocean diluted method discharging the liquid $CO_2$ into the deep ocean using the long pipe which is towed by the surface vessel is underway for the research steps which means that there are many potentials for the R&Ds that need for the breakthrough. In this paper, the role and example of the Computational Fluid Dynamics for the feasibility study of the $CO_2$ ocean sequestration is mentioned.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.330-330
• /
• 2002

The combination of Multi-Beam Echo Sounder swath bathymetry and high-resolution towed Sidescan sonar provides a powerful method of examination about hydrographic survey results. In this paper, we investigate the fast method of 3D bathymetric reconstruction with the Digital Sidescan sonar(Benthos SIS 1500) and Shallow Multi-Beam Echo Sounder(Reson Seabat 8125). The Seabat 8125 is a 455KHz high resolution focused Multibeam echo sounder(MBES) system which measures the relative water depth across a wide swath perpendicular to a vessel's track. The Benthos SIS1500 is a chirp(nominal fq. 200KHz) sonar which map the topographical features & sediment texture of ocean bottom using backscattered amplitude. We generates the very large 3D bathymetric texture mapping model with the Helical System's HHViewer and describes additional benefits of combining MBES and Sidescan Sonar imagery, the removal of geometric distortions in the model and a deterministic sounding noise.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.10a
• /
• pp.17-18
• /
• 2012

해상에서 사고선박을 사고지점으로부터 안전한 곳으로 이동시키는 것은 사고선박의 2차적인 피해를 사전에 예방할 수 있는 중요한 조치이다. 본 연구에서는 예인선을 이용하여 사고선박을 예인할 때 예인선에 의한 예인력과 사고선박의 거동을 결정짓는 무게중심에서의 힘 토크 관계를 살펴보고자 한다. 먼저 간략화된 사고선박의 모델을 이용하여 목적으로 하는 움직임을 달성하기 위한 무게중심에서의 힘과 토크를 계산하였다. 이러한 힘과 토크를 발생시키기 위해서는 소정의 지점에 예인삭을 연결하여 예인력을 가해야 하므로, 무게중심에서의 힘과 토크를 발생하기 위해 필요한 각 지점에서의 힘을 해석적으로 도출하였다.