• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.7
• /
• pp.1279-1284
• /
• 2008

In this paper, utilizing a haptic display for 3D modeling practice is proposed. A haptic display called PHANTOM Omni providing 3D position as well as touch feeling is used to investigate how effectively the proposed practice works compared to the conventional ones for 3D modeling. Experimental results showed the proposed practice can provide positive effect for 3D modeling: improving the task completion time and lowering task workload, thus increasing the usability.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2013.07a
• /
• pp.73-74
• /
• 2013

터치 디스플레이 기술이 발달함에 따라 이를 이용한 스마트 폰을 비롯한 스마트 테이블, 스마트 월 등 다양한 HW 플랫폼들이 대두되고 있다. 특히, 터치 디스플레이의 대형화가 가능해짐에 따라 이를 기반으로 다양한 서비스가 제공될 것으로 예상된다. 이를 이용하는 서비스들은 멀티 터치를 기반으로 한명 이상의 사용자 입력을 필요로 할 수 있다. 이에 따라 터치 디스플레이의 주요 입력 도구인 가상 키보드 역시 마찬가지의 요구사항이 있다. 본 논문에서는 리눅스 환경에서 차세대 윈도우즈 매니저(Wayland/Weston)을 기반으로 가상 키보드 등록, 생성 및 사용 과정에 대해 분석하고, 멀티 가상 키보드를 지원하는 윈도우 매니저를 설계 및 구현한다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.474-475
• /
• 2009

As a substitute of ITO material, carbon nanotube (CNT) is widely studied for transparent conductive film (TCF). Current sheet resistance of CNT-TCF is about 100 ${\Omega}$/sq at 80% transmittance. But CNT-TCF performance in manufacturable level is about 500 ${\Omega}$/sq at 83% based on the Topnanosys Co's result. Therefore, critical issue in CNT-TCF research is to reduce the sheet resistance with manufacturing reliability. In this report, recent developments using CNT-TCF are introduced. Touch panel, transparent LED signboard, transparent speaker and transparent heater are representative examples. Also I describe the future issues and prospect of CNT-TCF for the flexible display.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.4
• /
• pp.563-569
• /
• 2011

Objective: This study focuses on the effects of pre-cues informing the location of upcoming visual stimulus on finger movement response in the context of control-on-display interfaces. Background: Previous research on pre-cues focus on attention allocation and motion studies were limited to indirect control conditions. The design of this study aimed to collect data on the exact landing point for finger-tap responses to a given visual stimulus. Method: Controlled visual stimuli and tasks were presented on a UI evaluation system built using mobile web standards; response accuracy and response time were measured and collected as appropriate. Among the 16 recruited participants, 11 completed the experiment. Results: Providing pre-cue on the location of stimulus affected response time and response accuracy. The response bias, which is a distance from the center of stimulus to the finger-tap location, was larger when the pre-cue was given during a one-handed operation. Conclusion: Given a pre-cue, response time decreases, but with accuracy penalized. Application: In designing touch-screen UI's - more strictly, visual components also acting as controllers - designers would do well to balance human perceptual and cognitive characteristics strategically.

• Journal of the Korea Convergence Society
• /
• v.11 no.8
• /
• pp.115-122
• /
• 2020

The purpose of this study is to develop the fabric electronics-based safety protection smart athleisure fashion for night riding. Based on the characteristic analysis of products being used during night riding, the fabric LED Display and fabric type capacitive touch sensor to emphasize human friendliness were designed in detachable form through an intuitive interface to develop the smart athleisure fashion of prototype. This is meaningful in that it proposed smart Athleisure fashion products differentiated from existing products, considering the functional aspects based on fabric electronics that emphasized human friendliness and the design aspects of the customized system that can diversify design through exchange and compatibility with other Athleisure products due to detachable form. Follow-up study will focus on the improvement of textile sensor fit for the physical properties of a textile with reinforced wearability and flexibility by using Fabric Electronics and proposed customized smart fashion based on it.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.43-53
• /
• 2010

The interactive display is providing various interaction modes to users through various ubiquitous computing technologies. These methods were studied for their interactions, but the limits that it is provided to only single user and the device usability were generated. In this paper, we propose a new type of spatial multi interaction interface that provide the various spatial touch interactive to multi users in the ambient display environment. Therefore, we generate the interaction surface so that a user can interact through the IR-LEDs Array Bar installed in the ceiling of the ambient display environment. At this time, a user can experience the various interactions through the spatial touch in an interaction surface. Consequently, this system offers the interactive display and interface method that the users can interact through natural hand movement without the portable devices.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.850-853
• /
• 2005

This paper presents issues of display hardware architecture, relating to memory, display driver IC architecture, and chip-to-chip interface. To achieve a low power and low cost mobile phone, not only the display architecture must be carefully selected, but also the driver-ICs optimized to accommodate the different modes of operation found in typical handheld devices. The technique of forming a photo sensor in each pixel using TFT and display module architecture are developed to add multi functions in display such as fingerprint recognition, image scanning, and integrated touch screen. Detailed architectures of IC partitioning, high-speed serial interface, D/A converter, and multi functions such as fingerprint recognition and image scanning using photo sensors are important to a power optimized system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.5
• /
• pp.352-359
• /
• 2016

The soft keyboard with touch interaction is universally available on mobile phone, a variety of previous studies with respect to the soft keyboard on smart devices had been conducted. However, previous studies of cursor control for text entry on smart devices such as smartphone did not performed. In this study, we compared three types of cursor controls (Default, 3D touch, Slide) in smartphone using Fitts' law and C-D ratio. Then we performed a laboratory experiment with three cursor control types and evaluated using cursor movement time as a quantitative evaluation and 8 subjective metrics for usability as a qualitative evaluation. Then, we discussed what types of cursor control showed better performance and subjective satisfaction through their results. From these results, this study recommended the design guidelines for cursor control on smartphones and developed its study methods as our contributions.

• Annual Conference of KIPS
• /
• 2008.05a
• /
• pp.19-21
• /
• 2008

본 논문에서는 테이블 형이 아닌 스탠드형 테이블 탑 디스플레이에 대한 연구를 다루고 있다. 스크린에 대한 터치를 인식으로 입력을 받아들이므로 TouchFace III 라고 명명하고 있으며, 기존에 개발되었던 두 대의 테이블 탑 디스플레이와는 형태에서 차별을 두고 있다. TouchFace III 시스템은 FTIR(Frustrated Total Internal Reflection : 내부 전반사 장애 현상) 방식이 아닌 TouchLight방식과 HoloWall방식을 조합하여 시스템을 구성하였다. 그래서 스크린에서의 직접적인 손터치 뿐만 아니라, 스크린에 반사되는 손형상에 대한 제스처까지도 인식할 수 있도록 연구중에 있다. 이는 협업을 강조하는 테이블 탑 디스플레이의 컨셉에 어울리며 한 디바이스를 이용하여 동시에 여러사용자가 디바이스를 조작하는 것을 가능하게 한다.

• Journal of the Optical Society of Korea
• /
• v.18 no.1
• /
• pp.32-36
• /
• 2014

A tangible floating display that can provide different perspective views without special glasses being introduced. The proposed system can display perspective floating images in the space in front of the system with the help of concave mirrors. In order to avoid wearing special equipment to interact and deliver the sense of touch, the proposed system adopted an ultrasound focusing technology. For providing an immersive experience to the viewers, the proposed system consists of a tangible floating display system and a multiple-view imaging system for generating three lenticular displays in front of the users.