• 대한방사선기술학회지:방사선기술과학
• /
• 제44권6호
• /
• pp.679-688
• /
• 2021

This study is a questionnaire about the lesson environment that radiation major students prefer in a non-face-to-face live online lesson environment for a total of 133 students, 65 second graders and 68 third graders who are enrolled in the department of radiology at a university located in the Seoul metropolitan area. And checked the satisfactory level by grade. The questionnaire consists of three categories: 1st real-time non-face-to-face lectures, 2nd professor lectures, and 3rd corona lectures. A total of 14 questions, with multiple choice and descriptive response methods. As an evaluation method, in the case of a multiple-choice question, the average was calculated using a 5-point Likert scale. As a result of conducting the independent sample T-test of the SPSS program, the response by grade was P > 0.05, and no significant result was shown by the contents of the questionnaire survey of the second grade. As for the lecture method of the department of radiology after the end of Covid-19 virus, it is better to promote face-to-face lessons in radiation training subjects and non-face-to-face real-time education in subjects centered on radiation theory.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.41-48
• /
• 2018

Recently, the concept of an outrigger damper system with a damper added to the existing outrigger system has been developed and applied for dynamic response control of high-rise buildings. However, the study on the structural characteristics and design method of Outrigger damper system is in the early stages. In this study, a 50 story high - rise building was designed and an outrigger damper system with viscoelastic damper was applied for wind response control. The time history analysis was performed by using the kaimal spectrum to create an artificial wind load for a total of 1,000 seconds at 0.1 second intervals. Analysis of the top horizontal maximum displacement response and acceleration response shows that outrigger damper systems are up to 28.33% and 49.26% more effective than conventional outrigger systems, respectively. Also, it is confirmed that the increase of damping ratio of dampers is effective for dynamic response control. However, since increasing the damping capacity increases the economic burden, it is necessary to select the appropriate stiffness and damping value of the outrigger damper system.

• 한국건설관리학회논문집
• /
• 제19권3호
• /
• pp.11-22
• /
• 2018

건축물 화재상황에서 피난시간을 감소시키기 위한 기존의 노력들은 피난시간의 구성요소 중 피난행동시간을 감소시키는 데 집중되었다. 그러나 피난행동시간의 비율이 전체 피난시간의 1/3임에도 불구하고 이를 제외한 인지시간과 초기대응행동시간을 감소시키기 위한 고려는 부족한 실정이며, 특히 피난행동시간만을 감소시킴으로써 피난성공률을 향상시킬 수 없는 상황이 발생하게 되었다. 따라서 인지시간과 초기대응행동시간을 감소시킬 수 있는 재난정보라는 개념이 주목 받게 되었다. 본 연구는 재난정보가 재실자특성에 작용하는 과정을 분석하기 위해 피난시간의 감소 측면에서 10가지 주요 재난정보와 3가지 재실자특성 요소의 관계를 설명하는 재난정보-재실자특성 연관성을 도출하였다. 또한 노인, 지적장애인, 청각장애인과 시각장애인을 대상으로 설문조사를 통한 가상의 피난실험을 수행, 재난정보가 재실자특성에 작용하는 과정을 부족한 재실자특성을 보완하여 최저수준의 화재안전성을 확보하는 과정과 일정 수준 보유한 재실자특성을 극대화하여 화재안전성을 확보하는 과정으로 분석하였다. 본 연구를 통해 직관적인 수준에서 설명되는 기존의 재난정보-재실자특성 간의 관계에 피난시간의 감소라는 관점에서의 설명력을 더하였고, 향후 다양한 재실자 유형이 존재하는 상황에서의 재난정보 관계에 대하여 후속연구가 진행된다면 재난정보와 재실자특성을 고려하는 후속 연구에 기초적 자료를 제공할 것으로 기대된다.

• 응용통계연구
• /
• 제31권5호
• /
• pp.587-597
• /
• 2018

조사목적에 부합하는 표본 자료를 얻기 위해서는 추출방법 및 조사방법 결정, 설문지 작성 등의 절차가 필요하며 중요한 결정 중 하나가 표본크기 공식의 적용이다. 표본크기 공식은 추출방법에 따른 목표오차와 총비용 등을 설정함으로써 결정되는데 본 논문에서는 단순임의추출에서 목표오차와 예상 응답률이 주어져 있을 때 과거 및 현재 시점의 모집단의 변동과 과거 자료의 추정오차 및 응답률을 사용한 표본크기 공식을 제안한다. 실제조사에서는 설계가중치 외에도 여러 가중치가 복합적으로 적용되는 추정량을 사용하고 있는데 본 논문에서는 설계가중치와 무응답 보정계수를 사용한 추정량에서의 표본크기 공식을 유도하며 이것은 시점별 조사방법이 달라질 경우 응답률에 차이가 발생하는 현상을 반영한 공식이 될 수 있다. 또한 모의 실험을 통하여 기존의 표본크기 공식과 비교함으로써 제안된 공식의 다양한 적용방안을 살펴본다.

• Smart Structures and Systems
• /
• 제31권2호
• /
• pp.101-111
• /
• 2023

Structural health monitoring (SHM) covers a range of damage detection strategies for buildings. In real-time, SHM provides a basis for rapid decision making to optimise the speed and economic efficiency of post-event response. Previous work introduced an SHM method based on identifying structural nonlinear hysteretic parameters and their evolution from structural force-deformation hysteresis loops in real-time. This research extends and generalises this method to investigate the impact of a wide range of flag-shaped or pinching shape nonlinear hysteretic response and its impact on the SHM accuracy. A particular focus is plastic stiffness (K_p), where accurate identification of this parameter enables accurate identification of net and total plastic deformation and plastic energy dissipated, all of which are directly related to damage and infrequently assessed in SHM. A sensitivity study using a realistic seismic case study with known ground truth values investigates the impact of hysteresis loop shape, as well as added noise, on SHM accuracy using a suite of 20 ground motions from the PEER database. Monte Carlo analysis over 22,000 simulations with different hysteresis loops and added noise resulted in absolute percentage identification error (median, (IQR)) in K_p of 1.88% (0.79, 4.94)%. Errors were larger where five events (Earthquakes #1, 6, 9, 14) have very large errors over 100% for resulted K_p as an almost entirely linear response yielded only negligible plastic response, increasing identification error. The sensitivity analysis shows accuracy is reduces to within 3% when plastic drift is induced. This method shows clear potential to provide accurate, real-time metrics of non-linear stiffness and deformation to assist rapid damage assessment and decision making, utilising algorithms significantly simpler than previous non-linear structural model-based parameter identification SHM methods.

• 한국토양비료학회지
• /
• 제47권6호
• /
• pp.571-578
• /
• 2014

The garlic cultivation area is moved by change of grown environment due to global warming. It is important to predict changes in cultivation area, quantity and quality of each crop. This study was carried out to estimate the yield and response of garlic growth by the rapid temperature changes in the greenhouse with thermostat control system. Seedlings of Namdo garlic were planted on September 27, 2012 and harvested on May 30, 2013. The used treatments for a rapid temperature change in March-April-May were T0 (control): $6.0-10.4-17.2^{\circ}C$, T1: $6.0-5.4(-5)-17.2^{\circ}C$, T2: $6.0-10.4-22.2(+5)^{\circ}C$ and T3: $6.0-5.4(-5)-22.2(+5)^{\circ}C$. Total dried weight per plant of garlic significantly increased by 5.0% for T2, but T1 and T3 decreased by 12.5 and 4.6%, respectively, compared to T0. Total yields of bulb within the temperature change as T2 and T0 increased significantly (p<0.05), as compared to T1. Decreasing temperature significantly (p<0.05) reduced plant height, SPAD reading, crude protein and fiber contents etc., as compared to T0 and T2. ABA contents gradually increased with time but IAA content rapidly decreased. Conclusively, growth and yield of garlic were more affected by decreased temperature than increased temperature at bulb development stage.

• Current Research on Agriculture and Life Sciences
• /
• 제32권2호
• /
• pp.67-73
• /
• 2014

Mulberry fruits were semi-dried using hot air ($60-100^{\circ}C$) or cool air ($20-40^{\circ}C$), and the effects of the drying temperature and processing time on the quality of the final dried mulberry fruits were investigated. Response surface methodology was employed to establish a statistical model and predict the conditions resulting in minimal loss of the total phenolic content (TPC) and ascorbic acid. Thus, using overlapped contour plots, the optimal conditions for producing semi-dried mulberry fruits, which reduced the moisture residue to 45% and minimized the nutrient losses of TPC and ascorbic acid, were determined for the hot-air process ($60.7^{\circ}C$ for 5.4 h) and cool-air process ($34.8^{\circ}C$ for 23.3 h). Plus, a higher drying temperature was found to lead to a faster loss of moisture and ascorbic acid, while the TPC was significantly decreased in the cool-air dried mulberry fruits due to the higher activity of polyphenol oxidase between 30 and $40^{\circ}C$.

• Natural Product Sciences
• /
• 제29권2호
• /
• pp.83-90
• /
• 2023

To our knowledge, this is the first study aiming to optimize the extraction conditions of total phenolic compounds (TPC) and total flavonoids contents (TFC) from Argania spinosa leaves using Response Surface Methodology (RSM) with a Box-Behnken design (BBD). The optimal conditions obtained were 5% (w/v) solvent-to-solid ratio, 72.33% ethanol concentration, and 10h ours as an extraction time, which resulted in an extract with maximum TPC (131.63 mg GAE/g dw) and TFC (10.66 mg QE/g dw). Under the optimal extraction conditions, the antioxidant activity of the extracts of leaves of argan tree showed a moderate antiradical capacity of DPPH (IC₅₀ = 0,130 mg/mL) and ABTS (IC₅₀ = 0.198 mg/mL). However, the leaves of argan tree showed a very interesting reducing power of Iron (IC₅₀ = 0.448 mg/ml) which is similar to that of the ascorbic acid (IC₅₀ = 0.371 mg/mL).

• Restorative Dentistry and Endodontics
• /
• 제29권3호
• /
• pp.226-232
• /
• 2004

Use of electric pulp testing elicits painful response in vital teeth. In this study, we examined the excessive time from pain feeling to stimulation disconnection in clinical situation. D626D (Parkell Inc., USA.) scan type electric pulp tester was used in total of 23 young healthy individuals. Each of the right central incisors and first premolars were used as testing teeth. Stimulation disconnection was achieved by EMG in anterior belly of digastric muscle, finger span, and voice and the excessive stimulation time over the sensory thresh-old was recorded. As a result, we found that the short responses before the stimulation disconnection appeared following order：EMG, finger span, and voice. The EMG disconnection is suggested to be used to reduce the excessive stimulus time in electric pulp testing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.64-66
• /
• 1998

This paper presents a new efficient method for transient analysis in magnetodynamic systems of linear eddy current problems. This mehtod employs the Fourier transform and the high-order frequency sensitivity of harmonic finite element method. By taking into account the time-constant of magnetodynamic system, the Fourier integral of continuous frequency is converted into the Fourier series of discrete frequency. And with the results of Fourier series expansion of converted input wave form, the responses of each sinusoids is superposed to give the total response of the magnetodynamic systems. But, if the frequency band of input wave form is broad, it takes long computational time since all responses for each sinusoids must be calculated. Therefore, the high-order frequency sensitivity method is employed to estimate the response variation to frequency. The proposed algorithm is applied to an induction heating system to validate its numerical efficiency.