• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.473-478
• /
• 2015

Green bodies of earthenware tile were prepared from a mixture of earthenware tile powder and SiC as forming agents by applying a conventional process. Granule powder for tile samples was prepared using the spray drying method with commercial earthenware raw material with a quantity of SiC of 0.3 wt%. The applied pressure was $250kg{\cdot}f/m^2$ and the firing temperature was $1050-1200^{\circ}C$. The effects of the SiC particle size and sintering temperature on the open porosity and total porosity were investigated and the correlative mechanism was also discussed. While total porosity was not significantly changed by decreasing the SiC particle size, the open porosity showed a gradual decrease, which represents an increase of the closed porosity. As the sintering temperature increased, coarsening was made among the pores due to excessive oxidation. The volume shrinkage and bending strength were demonstrated for the sintered tile samples. The sintered bulk density was also measured to determine the weight reduction value.

• 한국식품과학회지
• /
• 제38권2호
• /
• pp.215-221
• /
• 2006

담금용기로서의 항아리의 간장발효특성을 규명하기 위해 원료 흙인 옹기토, 황토와 분쇄토의 배합비를 달리하여 옹기의 기공율을 조절한 항아리를 제작한 후 각각의 항아리에서 간장을 4개월간 숙성시키는 과정 동안 나타나는 이화학적인 변화, 미생물 생육 및 관능검사를 옹기의 기공율이 간장발효에 미치는 영향을 확인하고자 하였다. 기공율 조절을 위해 황토와 분쇄토를 동량 혼합한 흙(RP soil)을 각각 0, 40와 60%를 옹기토와 배합하여 세가지 종류의 항아리를 제작하였다. 숙성조건은 $30^{\circ}C$ 숙성실에서 4개원 동안 진행하였다. 기공율에 따른 변화를 보인 것은 수분손실, 염함량변화, pH 및 총산도, 단백질 분해효소 활성 변화, 미생물변화, 핵산, 색도변화 및 관능검사 결과였고 기공율이 가장 낮은 0% RP soil 항아리에서 숙성시킨 간장이 보다 긍정적인 결과를 보였으며 그 다음으로 각각 40와 60% RP soil을 함유한 항아리 순 이였다. 반면에 총질소 함량의 변화는 처리구간별에 따른 차이를 볼 수가 없었으며 총유리아미노산 함량은 숙성 4개월째 0% RP soil 항아리에서 4,848 mg/100 g로서 40% RP soil 처리구 5,434 mg/100 g, 60% RP soil 처리구 5,477 mg/100 g에 비해 상대적으로 낮은 함량을 보였다. 하지만 0% RP soil 항아리는 수분 손실이 처리구들 중에서 가장 낮은 약 28%로서 다른 처리구에서 거의 40%의 수분손실을 보인 결과를 고려하면 수분손실에 따른 영향이 기공율보다 더 큰 영향을 준 것으로 사료되었다. 한편, 맛난 맛을 내는 glutamic acid의 비는 0% RP soil 항아리가 다른 처리구에 비해 상대적으로 조금 높은 함량을 보였다. 이와 같이 이화학적으로 보다 긍정적인 결과를 얻은 0% RP soil 항아리에서 발효시킨 간장은 관능검사 결과에 있어서도 색, 향기, 맛과 더불어 전체적인 평가에서 모두 가장 높은 평가를 받았다.

• 암석학회지
• /
• 제20권3호
• /
• pp.141-149
• /
• 2011

암석의 물리적 특성 변화에 대해 온도의 영향을 연구하기 위해 2종의 화강암류와 대리암, 사암을 전기로에서 $400^{\circ}C$와 $600^{\circ}C$로 가열하였다. 모든 시료에서 가열 후 물리적 특성(비중, 공극률, 흡수율, 초음파속도)과 색상 변화는 보이나, 편광현미경을 이용한 광물학적 변화는 뚜렷하지 않다. 특히 물리적 특성 변화에서 공극률과 흡수율은 증가하고, 비중과 초음파 속도는 감소하는 경향을 보이며, 온도가 증가할수록 변화폭은 크게 나타난다. 여기서 측정한 공극률은 암석의 전체 공극률을 반영하지 못하고 있으나 온도에 의한 암석의 표면 상태 변화를 반영한다 반면 초음파 속도는 암석의 전체적인 손상 정도를 파악하는데 유용하다. 그러므로 온도에 의한 암석의 물리적 특성 변화를 설명하기 위해 공극률과 초음파 속도는 상호 비교해야 한다.

• 유기물자원화
• /
• 제23권4호
• /
• pp.52-62
• /
• 2015

본 연구에서는 퇴비화공정에서 첨가재로 주로 사용되는 톱밥을 대상으로 톱밥 내 공기투과성 변화에 영향을 미치고 있는 요인별 특성과 총차감압력에 미치는 기여도를 평가하였다. 공기투과성 변화에의 영향요소로서 층류속도(v), 난류속도($v^2$), 수분함량(MC*v), 공기공극률(AFP*v), 입자크기(SIZE*v)를 선정하여 차감압력 산정을 위한 회귀식을 제시하였다. 차감압력에의 증가요인은 층류속도(v)와 입자크기(SIZE*v)이며, 감소요인은 난류속도($v^2$), 수분함량(MC*v), 공기공극률(AFP*v)이다. 공기유입속도를 높이면 총차감압력이 지속적으로 증가하였으며, 이러한 총차감압력 변화에 영향을 크게 미치는 증가요인은 입자크기(SIZE*v)이며, 감소요인은 공기공극률(AFP*v)이다. 또한 총차감압력에의 증가기여도는 낮은 유속에서는 층류속도(v)가 높은 유속에서는 입자크기(SIZE*v)의 기여도가 높았으며, 감소기여도는 공기공극률(AFP*v)이 가장 높았다. 반면에 수분함량 변화에 따른 총차감압력 변화는 그리 크지 않았다. 따라서 총차감압력은 증가요인보다는 감소요인인 공기공극률(AFP*v)과 수분함량(MC*v)에 의하여 영향을 받고 있음을 알 수 있다. 본 연구결과로서, 효율적 퇴비화공정을 위하여는 적정 수분함량 유지와 함께 공기공극률이 높은 첨가재를 선정하여 공기투과성을 향상시키는 방법이 적절할 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.538-543
• /
• 2003

Perforated wall has long been employed to control a variety of flow phenomena. It has been, in general, characterized by a porosity of the perforated wall. However, this porosity value does not take account of the number and detailed shape of porous holes, but is defined by only the ratio of the perforated area to total wall surface area. In order to quantify the porous wall effects on the flow control performance, an effective porosity should be known with the detailed flow properties inside the porous holes. In the present study, a theoretical analysis using a small disturbance method is performed to investigate detailed flow information through porous hole and a computational work is also carried out using the two-dimensional, compressible Navier-Stokes equations. Both the results are compared with existing experimental data. The gasdynamical porosity is defined to elucidate the effect of perforated wall.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.159-162
• /
• 1999

The paper presents results of an investigation on the permeability characteristics and pore structure of concrete containing different levels of fly ash, silica fume, or blast furnace slag. The total cementitious content was 351kg/㎥, and the water/cementitious materials ratio was 0.55. The porosity and pore structure of representative pastes of the matrix were measured using mercury intrusion porosimetry, and the permeability characteristics of concrete were also determined by water and oxygen permeability, chloride ion penetration. The results show that significant reduction in permeability of concrete containing pozzolanic materials due to formation of a discontinuous macro-pore system which inhibits flow. And, the permeability of concrete and pore structure(capillary porosity or total porosity) shows linear relationship.

• Environmental Engineering Research
• /
• 제12권3호
• /
• pp.109-117
• /
• 2007

The characteristics of carbonaceous particles collected from the combustion of Vacuum Residue (VR) in a test furnace have been investigated. The physical and chemical characterization includes particle size, scanning electron microscopy of the surface structure, measurement of porosity, surface area and density, EDX/XRD analyses and measurement of chemical composition. The studies show that the carbonaceous VR particles are very porous and spheroidal, and have many blow-holes on the surface. The particles become smaller and more sponge-like as the reaction proceeds. The present porosity of VR particles is similar to that of cenospheres from the combustion of heavy oil, and the majority of pores are distributed in macro-pores above $0.03\;{\mu}m$ in diameter. Measurements of pore distribution and surface area showed that the macro-pores contributed most to total pore volume, whereas the micro-pores contributed to total surface area.

• Structural Engineering and Mechanics
• /
• 제76권1호
• /
• pp.27-56
• /
• 2020

In this paper, the deflection and buckling analyses of porous nano-composite piezoelectric plate reinforced by carbon nanotube (CNT) are studied. The equations of equilibrium using energy method are derived from principle of minimum total potential energy. In the research, the non-local strain gradient theory is employed to consider size dependent effect for porous nanocomposite piezoelectric plate. The effects of material length scale parameter, Eringen's nonlocal parameter, porosity coefficient and aspect ratio on the deflection and critical buckling load are investigated. The results indicate that the effect of porosity coefficient on the increase of the deflection and critical buckling load is greatly higher than the other parameters effect, and size effect including nonlocal parameter and the material length scale parameter have a lower effect on the deflection increase with respect to the porosity coefficient, respectively and vice versa for critical buckling load. Porous nanocomposites are used in various engineering fields such as aerospace, medical industries and water refinery.

• 대기
• /
• 제17권4호
• /
• pp.315-326
• /
• 2007

The effects of windbreaks on the reduction of suspended particles are investigated using a computational fluid dynamics (CFD) model with the ${\kappa}-{\varepsilon}$ turbulence closure scheme based on the renormalization group (RNG) theory. In the control experiment, the recirculation zones behind the storage piles are generated and, as a whole, relatively monotonous flow patterns appear. When the windbreaks with the 0% porosity are constructed, the recirculation zones are generated by the windbreaks and very complicated flow patterns appear due to the interference between the windbreaks and storage piles. The porosity of the windbreaks suppresses the generation of the recirculation zone and decreases the wind velocity in the windbreaks as well as that outside the windbreaks. As the emission of suspended particles from the storage piles are closely related with the friction velocity at the surfaces of the storage piles, variation of the friction velocity and total amount of the emission of the suspended particles with the height and porosity of the windbreaks are investigated. The results show that higher and more porous windbreaks emit less suspended particles and that the reduction effect of the porosity is still more effective than that of the height. In the case of the windbreak with 30 m height and 50% porosity, friction velocities above the storage piles are smaller than the critical friction velocity above which particles would be suspended. As a result, total amount of suspended particles are much fewer than those in other cases.

• 한국환경농학회지
• /
• 제41권2호
• /
• pp.101-107
• /
• 2022

BACKGROUND: Soil amendment was necessary applied for the sand that had been used to root zone of green ground in golf course because of its low water retention power and cation exchangeable capacity. This study was conducted to evaluate the effect of the mixed ratio of peat moss and coconut coir as soil amendment materials on the soil physicochemical properties applied to rootzone based on sand. METHODS AND RESULTS: The soil amendments were blended at 0, 3, 5, 7 and 10% by soil volume. The pH in the peat moss treatment was lower than that of control (0% soil amendment), and pH and electrical conductivity (EC) in the coconut coir were higher. The blending ratio of peat moss was negatively correlated with pH of rootzone soil (p<0.01), and that of coconut coir positively with EC (p<0.01). As compared with control, capillary porosity, the physical factors such as air-filled porosity, total porosity, and hydraulic conductivity of rootzone soil were increased by applying peat moss and coconut coir. For correlation coefficients between percentage of soil amendments and soil physical factors, peat moss and coconut coir were positively correlated with porosity and hydraulic conductivity (p<0.01). CONCLUSION(S): These results indicated that the application of peat moss and coconut coir affected on the change of physicochemical properties of rootzone soil, and improved soil porosity and hydraulic conductivity.