• Hip & pelvis
• /
• v.30 no.4
• /
• pp.276-281
• /
• 2018

Pseudotumors are not uncommon complications after total hip arthroplasty (THA) and may occur due to differences in bearing surfaces of the head and the liner ranging from soft to hard articulation. The most common causes of pseudotumors are foreign-body reaction, hypersensitivity and wear debris. The spectrum of pseudotumor presentation following THA varies greatly-from completely asymptomatic to clear implant failure. We report a case of pseudo-tumor formation with acetabular cup aseptic loosening after revision ceramic-on-metal hip arthroplasty. The patient described herein underwent pseudotumor excision and re-revision complex arthroplasty using a trabecular metal shell and buttress with ceramic-on-polyethylene THA. Surgeons should be aware of the possibility of a pseudotumor when dealing with revisions to help prevent rapid progression of cup loosening and implant failure, and should intervene early to avoid complex arthroplasty procedures.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.24 no.1
• /
• pp.77-83
• /
• 2018

Background: The purpose of this study is to investigate that effect of manual therapy using pelvic compression belt on hip abductor strength and balance ability in total knee replacement (TKR) patients. Methods: The subjects consisted of twenty two post-TKR patients. Participants were randomly assigned to a pelvic belt group (n=11) and a placebo group (n=11). All participants underwent manual therapy including range of motion exercise, soft tissue mobilization around knee joint, strengthening exercise (Quad set, SLR, sidelying hip abduction, standing hamstring curls, sitting knee extension, step-up, wall slide to $45^{\circ}$ knee flexion). Manual therapy was executed five times a week for 2 weeks. Outcome measures included hip abductor strength by using Biodex system 4 pro, anterior to posterior balance, medial to lateral balance, total balance by using Biodex balance system SD. Results: After the completion of the manual therapy, hip abductor strength was showed statistically significant improvements in pelvic belt group (p<.05). Anterior to posterior balance, medial to lateral balance, total balance were showed statistically significant improvements in pelvic belt group and placebo group (p<.05). There was a statistically significant difference between the two groups in hip abductor strength and there was no statistically significant difference in balance. Conclusions: This results suggest that manual therapy using pelvic compression belt has could be used for selective muscle activation of the hip abductor muscle and has useful in hip abductor strength and balance ability in TKR patients.

• Hip & pelvis
• /
• v.36 no.2
• /
• pp.129-134
• /
• 2024

Purpose: Preoperative planning has become essential in performance of total hip arthroplasty (THA). However, data regarding the effect of the planner's experience on the accuracy of digital preoperative planning is limited. The objective of this study was to assess the accuracy of digital templating in THA based on the surgeon's experience. Materials and Methods: A retrospective study was conducted. An analysis of 98 anteroposterior pelvic radiographs, which were individually templated by four surgeons (two hip surgeons and two orthopaedic residents) using TraumaCad^® digital planning, was performed. A comparison of preoperatively planned sizes with implanted sizes was performed to evaluate the accuracy of predicting component size. The results of preoperative planning performed by hip surgeons and orthopaedic residents were compared for testing of the planner's experience. Results: Femoral stem was precisely predicted in 32.4% of cases, acetabular component in 40.3%, and femoral offset in 76.7%. Prediction of cup size showed greater accuracy than femoral size among all observers. No differences in any variable were observed among the four groups (acetabular cup P=0.07, femoral stem P=0.82, femoral offset P=0.06). All measurements showed good reliability (intraclass correlation coefficient [ICC] acetabular cup: 0.76, ICC femoral stem: 0.79). Conclusion: The results of this study might suggest that even though a surgeon's experience supports improved precision during the planning stage, it should not be restricted only to surgeons with a high level of experience. We consider preoperative planning an essential part of the surgery, which should be included in training for orthopaedics residents.

• Hip & pelvis
• /
• v.35 no.4
• /
• pp.238-245
• /
• 2023

Purpose: Elderly patients with degenerative diseases undergo treatment for the hip and spine; these patients present with various symptoms. This study focused on patients with residual symptoms, predominantly pain, even after receiving treatment for their spinal lesions. Materials and Methods: Patients who underwent total hip arthroplasty (THA) between 2016 and 2022 at a single tertiary hospital were included in the study. Of the 417 patients who underwent primary THA, a retrospective review of 40 patients with previous lesions of the spine was conducted. Patients were stratified to two cohorts: Patients with symptoms related to the spine (Group A), and those with hip-related symptoms (Group B). Preand postoperative comparisons of groups A and B were performed. Results: Improvements in patients' symptoms were observed in groups A and B after THA. In Group A, the mean preoperative visual analog scale (VAS) score was 5.10±0.876, which showed a postoperative decrease to 2.70±1.767. In Group B, the mean preoperative VAS score was 5.10±1.539, which showed a postoperative decrease to 2.67±1.493. Conclusion: According to the findings, promising results were achieved with THA in treatment of debilitating diseases of the hip for both the prognosis of the disease, as well as the patients' symptoms. In addition, in some cases elderly patients with dual pathologies underwent treatment for spinal lesions without performance of any evaluation related to the hip. Thus, evaluation of a patient's hip must be performed and performance of THA in patients with symptoms even after treatment of spinal lesions is recommended.

• Hip & pelvis
• /
• v.35 no.4
• /
• pp.277-280
• /
• 2023

Dislocation after a total hip arthroplasty occurs in approximately 1% of patients; however, the frequency is much higher after revision surgery. To prevent dislocation, use of a larger femoral head is recommended, and a dual mobility femoral head has been introduced. However, reducing the dual mobility femoral head to the acetabular component is difficult in cases involving contracture in the soft tissue around the joint. A 72-year-old male patient who developed a periprosthetic joint infection underwent two-stage revision surgery using MUTARS^®. Two months after the revision, the hip joint became dislocated and manual reduction was attempted; however, dislocation occurred again. During another revision using a dual mobility bearing, the soft tissue around the hip joint was too tight to reduce. The problem was overcome by first repositioning the dual mobility head into the acetabular socket, followed by assembly of the diaphyseal portion of the implant.

• Journal of radiological science and technology
• /
• v.22 no.1
• /
• pp.21-26
• /
• 1999

To make a comparative analysis for clinical application of total hip replacement arthroplasty(THRA) using fluoroscopy, we have performed total hip replacement arthroplasty making 30 patients an object with general radiography and fluoroscopy respectively. The results are as follows : 1) Reexamination rate was 80% of patients and mean 3.9 sheets in the general radiography, where as it was 46.7% and 0.37 sheets in the fluoroscopy(p<0.01) 2) Add examination was 2 cases in the general radiography, but fluoroscopy was no add examination. 3) The total film sheet used was mean 10.16 in the general radiography and 6.73 in the fluoroscopy. 4) In the cause of reexmination and add examination, inaccurate position of patient accounted for 72.6% in the general radiography and poor exposure condition accounted for 45.5% in the fluoroscopy. Total hip replacement arthroplasty using the fluoroscopy decreased reexamination and add examination rate, for these reasons, this method was effective abatement of pain, exposured radiation dose, and examination time and so on.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.3
• /
• pp.200-208
• /
• 2008

Total Hip Replacement(THR) is a surgical procedure that replaces a diseased hip joint with a prosthesis. A plastic or metal cup forms the socket, and the head of the femur is replaced by a metal ball on a stem placed inside the femur. Due to the various types and shapes of human hip joint of every individual, a selected commercial implant sometimes may not be the best-fit to a patient, or it cannot be applied because of its discrepancy. Hence extracting geometry parameters of hip joint is one of the most crucial processes in designing custom-made implants. This paper describes the framework of a methodology to extract the geometric parameters of the hip joint. The parameters include anatomical axis, femoral head, head offset length, femoral neck, neck shaft angle, anteversion, acetabulum, and canal flare index. The proposed system automatically recommends the size and shape of a custom-made hip implant with respect to the patient's individual anatomy from 3D models of hip structures. The proposed procedure creating these custom-made implants with some typical examples is precisely presented and discussed in this paper.

• Hip & pelvis
• /
• v.36 no.2
• /
• pp.155-160
• /
• 2024

We report two cases of postoperative total hip arthroplasty periprostehtic fracture of the acetabulum which treated by open reduction with internal fixation without acetabular cup revision. From these cases, we should consider open reduction with internal fixation as the first treatment option in cases where spot welding of the cup to the host bone is observed.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.115-122
• /
• 2018

The success of the total hip arthroplasty is revealed as initial stability, range of motion, and long term pain, etc. Depending upon choice of implantation options such as femoral neck offset, diameter of the femoral head, the lateral opening tilt. Especially the impingement between femoral head component and acetabular cup limits the range of motion of the hip. In this sense, estimation or evaluation of the range of motion before and after the total hip arthroplasty is important. This study provides the details of a computer simulation technique for the hip range of motion of intact hip as well as arthroplasty. The suggested method defines the hip rotation center and rotation axes for flexion and abduction, respectively. The simulation uses CT-based reconstructed 3D models and an STL treating software. The abduction angle of the hip is defined as the superolateral rotation angle from sagittal plane. The flexion angle of the hip is defined as the superoanterior angle from the coronal plane. The maximum abduction angle is found as the maximum rotation angle by which the femoral head can rotate superolaterally about the anterior-posterior axis without impingement. The maximum flexion angle is found as the maximum rotation angle by which the femoral head can rotate superoanteriorly about the medial-lateral axis without impingement. Compared to the normal hip, the total hip replacement hip showed decreased abduction by 60 degrees and decreased flexion by 4 degrees. This measured value implies that the proposed measurement technique can make surgeons find a modification of increase in the femoral neck offset or femoral head, to secure larger range of motion.

• Hip & pelvis
• /
• v.35 no.4
• /
• pp.233-237
• /
• 2023

Purpose: The objective of this study was to analyze the results from a cohort of patients who underwent a revision total hip arthroplasty (THA) using a dual mobility cup (DMC) implant. Materials and Methods: A retrospective review of revised THAs was conducted using the database from a single tertiary referral hospital. A total of 91 revision THAs from 91 patients were included in the study. There were 46 male hips and 45 female hips. The mean age was 56.3±14.6 years, and the mean follow-up period was 6.4±5.9 years. In performance of revision THAs, the DMC implants were used in 18 hips (19.8%), and the conventional implants were used in 73 hips (80.2%). Results: During the follow-up period, three dislocations were identified, and the overall dislocation rate was 3.3%. Early dislocation (at one month postoperatively) occurred in one patient, while late dislocation (at a mean of 7.5 years) occurred in two patients. There was no occurrence of dislocation in the DMC group (0%), and three dislocations were detected in the conventional group (4.1%). However, no significant difference in the rate of dislocation was observed between the two groups (P=0.891). Conclusion: Although the rate of dislocation was higher in the conventional group, there were no statistically significant differences between the two groups due to the small number of patients. Nevertheless, we believe that the dual mobility design is advantageous in terms of reducing dislocation rate and can be recommended as an option for a revision THA.