• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1090-1097
• /
• 2008

This study conducted the decision method of lateral flow in abutment structures founded on the soft soils and the reliability analysis on the foundation pile for abutment. On the basis of the results, this study proposed the reliability design model. Reliability analysis was conducted by applying second moment method, point estimation method, and expected total cost minimization to lateral movement index, lateral movement decision index, modified lateral movement decision index, and circular failure safety factor for the decision criteria of lateral flow. The reliability index by analysis method had a similar tendency each other. Point estimation method was found as a practical method in the aspect of convenience because it could conduct the analysis only by mean and standard deviation as well as the partial derivative on random variables was not necessary. Optimum reliability index and optimum safety according to increasing in failure factors and load ratio were analyzed and loads and resistance factors of the design criteria of optimum reliability were estimated. It presented rational design model which can consider construction level and stability and economical efficiency overall.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.1109-1112
• /
• 2005

멀티캐리어 DS-CDMA시스템은 동일 시점에서 파일롯 채널을 제외한 모든 부채널에 동일 한 데이터가 전송된다. 이때 채널 추정을 위한 파일럿 채널의 수가 증가하게 되면 보다 정확한 채널 추정이 가능하나 데이터 채널의 감소로 인해 주파수 다이버시티의 효과가 크게 줄어들게 되어 전체적인 시스템성능을 저하시키게 된다. 따라서 파일롯 채널과 데이터 채널의 수에 대한tradeoff 가 존재하며 채널환경에 따른 요구되는 최적의 파일럿채널의 수가 결정되어야 한다. 본 논문에서는 파일롯 채널을 이용한 채널추정을 갖는 멀티캐리어 DS-CDMA시스템의 성능을 분석하고 채널환경에 따른 최적의 파일롯 채널구조를 제시한다. 전체 전송대역폭을 일정하게 유지했을 때 특정 채널환경에서 전체 부 반송파의 개수 및 파일롯 채널의 개수에 대한 최적값이 존재한다. 본 논문에서는 이와 같은 채널환경에 따른 파일롯 및 데이터 채널의 최적값을 수학적인 분석을 통해 제시한다.

• 한국위험물학회지
• /
• 제6권2호
• /
• pp.68-76
• /
• 2018

This study aims to provide a methodological framework to estimate the travel demand of hazardous materials transporting vehicles by link and analyze daily traffic patterns on an expressway to develop safety roadway management strategies. Traffic volume of hazardous material vehicles is counted through the on-site investigation at twenty-five tollgates on the expressway, and their demands by a link are predicted through origin-destination flows estimation. The result shows that the number of the domestic hazardous materials vehicles is approximately 51,207 vehicles per day and it indicates that hazardous materials transport vehicles account for 1.5% of total daily traffic on the internal expressway and 6.2% of total cargo traffic volumes. This study roughly estimated how many hazardous materials vehicles pass through the expressway segment. Thus it is expected to be utilized for establishing a systematic highway management strategy in the future by calculating the traffic volume of the hazardous material vehicles traveling on the interstate expressway.

• Geomechanics and Engineering
• /
• 제37권4호
• /
• pp.371-382
• /
• 2024

Measurement or prediction of compression index (C_c) of soils is essential for assessment of total and differential settlement of structures. It is a well-known fact that this parameter is controlled by several index identifiers of soil including initial void ratio, Atterberg limits, overconsolidation ratio, specific gravity, etc. Many studies in the past proposed relationships for prediction of C_c based on different index properties. Therefore, this study aims to present a comparison of previously proposed equations for estimation of C_c. Data from literature was compiled, and a total of 90 and 623 test results on remolded and undisturbed specimens were used to question the validity of previously proposed equations. Nevertheless, the modeling ability of 7 and 12 equations for estimation of C_c of remolded and undisturbed soils were questioned by use of compiled data. Moreover, new empirical relationships based on initial void ratio and toughness limit for prediction of C_c was proposed by use of nonlinear multivariable regression and evolutionary based regression analyses. The results are promising-the performances of models established are quite acceptable, which are verified by statistical analyses.

• 한국물환경학회지
• /
• 제32권4호
• /
• pp.375-383
• /
• 2016

Total Pollution Load Control (TPLC) calculates and manages the allowable pollutant load that is discharged from the watershed, which can meet the water quality target. Delivery Ratio (DR) is generally used for predicting the variation of pollutant mass balance between the pollutants discharged from the watershed and a certain point in the stream, and it is very important for estimation of accurate allowable pollutant load. The concept of DR in TPLC is different from prevalent DR, because DR in TPLC includes both the discharge of pollutants from the watershed and the delivery mechanism. Therefore, DR in TPLC should be estimated by using a proper and unified methodology. The appropriate method and equation for estimation of DR in TPLC was developed through the review of various methodologies, and the applicability of the equation was evaluated in a study area (Geumho A). Determination coefficients (R²) of regression were shown to be relatively high (BOD 0.71~0.87, T-N 0.86~0.90, T-P 0.62~0.69). Applicability of the developed methodology and equations was evaluated as appropriate for TPLC, and it is suggested.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.392-395
• /
• 2003

In this study was compared with result of instrumentation and numeral analysis of non-weir of concrete dam to prepare a plan for total safety estimation method such as reliability estimation of numerical analysis result, characteristics of dam behavior and etc. The results of instrument analysis of displacement and stress on N.H.W.L was similar to that of numeral analysis.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.403-406
• /
• 1999

Among the compression methods of moving picture information, a motion estimation method is used to remove time-repeating. The Block Matching Algorithm in motion estimation methods is the commonest one. In recent days, it is required the more advanced high quality in many image processing fields, for example HDTV, etc. Therefore, we have to accomplish not by means of Partial Search Algorithm, but by means of Full Search Algorithm in Block Matching Algorithm. In this paper, it is suggested a structure that reduce total calculation quantity and size, because the structure using Bit Plane select and use only 3bit of 8bit luminance signal.

• 산업경영시스템학회지
• /
• 제22권50호
• /
• pp.231-241
• /
• 1999

Recent market competition forces the price to be determined in the design stage so that the design would meet the target price of the product. However, most commercial PDM(Product Data Management) systems currently in use lack such a cost estimation function. In this paper, we propose detailed structure and functions of a new approach to estimate the cost of new products using integrated BOM in PDM. Such system will reduce the total life cycle cost of the products to be designed.

• 산업경영시스템학회지
• /
• 제15권25호
• /
• pp.53-62
• /
• 1992

Computer software users develop and utilize their application software by themselves since Processing methods are different by quantity and qualify of the information The developed model needs input data and error numbers generated during the testing phases. However. total error numbers of the existing model and each error time was needed as data for developing the new model. But, maximum likelihood estimation must be used to exponential model of binomial-type and estimating of parameters by using the searched data. Parameter estimation can be done with trial and error or simulation.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권11호
• /
• pp.1603-1609
• /
• 2006

To estimate undegraded intake protein (UIP) fraction in feeds and fodders, on the basis of their neutral detergent insoluble N content was studied. Samples of six feeds and forages were incubated in situ for a time equivalent to their mean retention time, estimated on the basis of their digestibility plus 10 h (to account for a lag in passage of particles from the rumen). The samples were incubated for 0, 25, 50, 75 and 100% of the estimated total mean retention time. UIP value of leguminous forages, obtained from the fractional rates of degradation and passage, were highly correlated with those estimated from samples incubated for 75% of total mean retention time, while incubating the non-leguminous forages and groundnut cake for this point over estimate the UIP fraction.