• 제목/요약/키워드: Total effective temperature

검색결과 526건 처리시간 0.034초

온도변화에 따른 GaAs MESFET의 주파수 특성에 관한 연구 (A Study on Frequency Response of GaAs MESFET with different Temperatures)

  • 정태오;박지홍;안형근;한득영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.550-553
    • /
    • 2001
  • In this study, unity current gain frequency f$\_$T/ of GaAs MESFET is predicted with different temperatures up to 400 $^{\circ}C$. Temperature dependence parameters of the device including intrinsic carrier concentration n$\_$i/ effective mass, depletion width are considered to be temperature dependent. Small signal parameters such as gate-source, gate dran capacitances C$\_$gs/ C$\_$gd/ are correlated with transconductance g$\_$m/ to predict the unity current gain frequency. The extrinsic capacitance which plays an important roles in high frequency region has been taken into consideration in evaluating total capacitance by using elliptic integral through the substrate. From the results, f$\_$T/ decreases as the temperature increases due to the increase of small signal capacitances and the mobility degradation. Finally the extrinsic elements of capacitances have been proved to be critical in deciding f$\_$T/ which are originated from the design rule of the device.

  • PDF

지르칼로이-4의 고온 수증기 산화에서 압력효과

  • 박광헌;김광표;황주호
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2000년도 춘계학술발표회 초록집
    • /
    • pp.5-5
    • /
    • 2000
  • In the severe accident case like LOCA, Zircaloy(Zry) claddings are oxidized not only in high temperature but also in high pressures. It is a concem whether the safety of high bum up fuels can be maintained during severe accident. The effects of steam pressure on Zry-4 oxidation, and the effect of prc-existing oxide layer on the cladding in the high temperature-high pressure oxidation of Ziy-4 were investigated. The experimental temperature range was $700-900^{\circ}C$, and the pressures were between 0.1 and l5.0MPa. Partial pressure of steam tumed out to be the important one rather than total gas pressure. The higher the steam pressure was applied, the thicker the oxide became. nle effect of st,earn pressure on the oxidation of claddings with preexisting oxide was about 40-60% less effective than that of pickled cladding. Aocelerated oxidation in highpressure slean1 seems to be originated from the formation of microcracks produced during the transformation of tetragonal zirconia to monoclinic phase. Steam pressure seems to affect the stability of tetragonal phase.

  • PDF

매미나방(Lymantria dispar) 발육에 미치는 온도의 영향 (Effects of Temperature on the Development of Gypsy moth (Lymantria dispar))

  • 조아해;김효정;이진희;김지인
    • 한국응용곤충학회지
    • /
    • 제62권4호
    • /
    • pp.385-388
    • /
    • 2023
  • 매미나방(Lymantria dispar)은 나비목(Lepidoptera) 독나방과(Lymantriidae)에 속하는 해충으로 매미나방은 한국, 일본, 시베리아, 유럽, 북아메리카 등에 분포하며, 주로 배나무, 사과나무, 블루베리 등의 식물을 가해하는 광식성 해충이다. 매미나방은 수목해충으로 관리되어 왔으나 최근 산림 발생지 인접 농경지로 유입 빈도가 높아지면서 방제 대책이 수립되지 않은 농작물에 피해가 심하다. 본 연구는 매미나방(L. dispar)의 방제기술의 일환으로 매미나방 발육에 미치는 온도의 영향을 알아보기 위해 2021년 전라남도 장흥군 황금측백나무에서 채집한 알집을 이용해 18, 21, 24, 27, 30, 33℃ (14L:10D, 상대습도 60±5%) 항온조건에서 온도별, 발육단계별 발육기간을 조사하였다. 매미나방 유충의 발육속도는 온도가 높을수록 빨라졌으나, 매미나방 유충의 생존율이 33℃에서 가장 낮게 나타났다. 따라서 발육적온은 30℃였으며, 30℃에서 총 발육기간은 암컷 43.8일, 수컷 42.5일 소요되었다. 암컷과 수컷 발육영점온도는 각각 13.1℃, 12.5℃, 유효적산온도는 각각 641.1 DD, 657.8 DD였다.

계면활성제를 이용한 합성고분자 수용액의 마찰저항감소 및 퇴화 특성 향상 연구 (The Study on Drag Reduction Rates and Degradation Effects in Synthetic Polymer Solution with Surfactant Additives)

  • 이동민;김남진;윤석만;김종보
    • 설비공학논문집
    • /
    • 제13권3호
    • /
    • pp.194-199
    • /
    • 2001
  • The turbulent flow resistance of water solution with polymer is reduced as compared with that of pure water. This effects is named th drag reduction and offers the significant reduction of the pumping power and the energy consumption. But the intense shear forces and the high temperature experienced by the polymer solution when passing through the pipes cause the degradation a loss of drag reduction effectiveness. Especially, the degradation behavior is found to be strongly dependent on temperature. This mechanical and thermal degradation can be avoided by adding materials such as surfactant to the polymer solution, which enhance the bonding force between molecules. In the present study, Copolymer and SDS were utilized and they were mixed in 10 different mixture ratios, while total concentration was fixed as 100wppm. Degradation of Copolymer-SDS mixture solutions was investigated experimentally in closed loop at the temperature of $10^{\circ}C\; and\; 80^{\circ}C$ with various flow average velocities of 1.5 m/sec, 3.0m/sec, and 4.5m/sec. Degradation characteristics of polymer solution without surfactant show a radical loss of drag reduction effectiveness at high temperature. Degradation alleviation ability of surfactant is especially effective at high temperature. Consequently, this results show that the addition of surfactant to the polymer solution can control unfavorable degradation phenomena for high temperature systems.

  • PDF

Optimal Hot Water Extraction Conditions of Mixed Herbs Extract Mixture Using Response Surface Methodology

  • Park, Tae-Young;Oh, Junseok;Hong, Jae-Heoi;Hong, Seong-Eun;Hong, Seong-Min;Oh, Hyeon-Min;Park, Gyeong-Su;Jeong, Hee Gyeong;Kim, Kyung Je;Jin, Seong Woo;Koh, Young Woo;Im, Seung Bin;Ha, Neul-I;Seo, Kyoungsun
    • 한국자원식물학회:학술대회논문집
    • /
    • 한국자원식물학회 2019년도 춘계학술대회
    • /
    • pp.106-106
    • /
    • 2019
  • Human needs energy to maintain metabolisms, and these energy sources were uptake foods or nutritions. The most effective source was known for glucose among the nutrients, furthermore the glucose is an important source of energy for blood cells and control brain maintenences cells. But as food is plentiful and eating habits become more westernized, fast food and irregular meal times by works. Nowadays, diabetes were rapidly increased by malnutriton and obesity. Diabetes was the sixth highest on the list of causes of death in Korea, released by the Statistics Korea in 2015, which is considered a serious social problem for adult diseases. Therefore, this study aims to establish the optimal hot water extraction conditions of mixed herbs extract mixture compounds that are effective in diabetes. The independent factors were extraction temperature (X1: $40-120^{\circ}C$), extraction time (X2: 2-10 hrs.), and the ratio of water to sample (X3: 40-200 mg/mL). Their effects were assessed on dependent variables of the extract properties, which included soluble solid contents, Brix of sample extract, total polyphenols content, total flavonoids content and DPPH Radical scavenging activity. As a result, the content of total polyphenol content was the highest in No.12(6 hrs, $120^{\circ}C$, 67 mg/mL) and the highest total flavonoid contents was found in No.16(6 hrs, $80^{\circ}C$, 40 mg/mL). DPPH Radical scavenging activity showed the highest activity in No.7(8 hrs, $100^{\circ}C$, 100 mg/mL).

  • PDF

입구 물온도와 열부하가 냉각탑의 팬동력에 미치는 영향 분석 (Effects of Inlet Water Temperature and Heat Load on Fan Power of Counter-Flow Wet Cooling Tower)

  • ;이근식
    • 대한기계학회논문집B
    • /
    • 제37권3호
    • /
    • pp.267-273
    • /
    • 2013
  • 막충진재(film fill)를 갖는 냉각탑용 팬의 효율적인 운전조건을 제시하기 위하여, Merkel의 이론을 바탕으로 한 종전의 최적 총연간비용 모델을 사용하여 입구 물온도와 열부하에 따른 최소팬동력을 구하는 프로그램이 새로이 개발되었으며, 냉각탑의 설계 맵이 본 연구로부터 제시되었다. 전형적인 예들을 통하여 본 프로그램의 타당성이 입증되었다. 주어진 열부하에서 이들 팬동력(z 축)-공기질량플럭스(x 축, 최소팬동력 존재)-입구물온도(y 축, 최소팬동력의 최대값 존재)의 3차원 그래프는 말안장 형상으로 나타났다. 최소팬동력들은 열부하에 따라 증가하였다. 따라서, '고온수 유입과 저유량의 공기로 작동' 될 때가 항상 최소팬동력 조건이 아니며, '주어진 입구물온도에 대하여 최소팬동력에 대응하는 최적의 공기질량플럭스가 (열부하와 무관하게) 존재한다'는 사실이 본 연구결과로부터 밝혀졌다.

현지 측정에 의한 남한지역의 지중유효열전도도, 보어홀 전열저항 및 초기온도 분석 (Analysis of Soil Thermal Conductivities, Borehole Thermal Resistances and Initial Soil Temperature with In-Situ Testing in South Korea)

  • 노정근;연광석;송헌
    • 한국태양에너지학회 논문집
    • /
    • 제32권5호
    • /
    • pp.68-74
    • /
    • 2012
  • Investigation of the effective soil thermal conductivity($k$) is the first step in designing the ground loop heat exchanger(borehole) of a geothermal heat pump system. Another important factor is the borehole thermal resistance($R_b$). Thermal response tests offer a good method to determine the ground thermal properties for the total heat transport in the ground. The first step is measured for initial soil temperature. This is done by supplying a only pump power into a borehole heat exchanger. They need to supply into water unload heat power more than 30 minutes. In this study, the initial soil temperature was found to analysis $14.1{\sim}16.0^{\circ}C$,the ratio was 68.7% represented. In this case of $k$, was 2.1~3.0 $W/m{\cdot}k$, $R_b$ was 0.11~0.20 $m{\cdot}K/W$. In this work, it is also shown that the distribution of a soil thermal conductivity and borehole thermal resistance were on the influence of initial soil temperature. And soil thermal conductivity was related with factors of equation by linear least square method, borehole thermal resistance was on the influence of composite factors.

Total Sugars, $\alpha$-amylase Activity, and Germination after Priming of Normal and Aged Rice Seeds

  • Lee, Suk-Soon;Kim, Jae-Hyeun
    • 한국작물학회지
    • /
    • 제45권2호
    • /
    • pp.108-111
    • /
    • 2000
  • Osmoconditioning and hardening effects for the seed germination of normal and naturally aged rice seeds were studied through analyzing the total sugars and $\alpha$-amylase activity. The normal seeds which used to have high germination rate accelerated germination with the osmoconditioning at the suboptimal temperature of 17$^{\circ}C$. On the other hand, the aged seeds did not affect germination rate at $25^{\circ}C$, while increased germination rate and accelerated germination a little at 17$^{\circ}C$, Hardening of aged seeds increased germination rate by 10-15% compared with control seeds at both 17 and $25^{\circ}C$ and accelerated germination. Total sugar content and $\alpha$-amylase activity of normal seeds were higher than did aged seeds. The aged seeds with treatment of osmoconditioning and hardening increased total sugar content and $\alpha$--amylase activity, but hardening was more effective than osmoconditioning. The $\alpha$--amylase activity was positively correlated with the total sugar content and germination rate.

  • PDF

수소기관에서의 배기가스에 관한 연구 (Study on Emission Characteristics in a Hydrogen-fueled Engine)

  • 조웅래;최경호;배석천
    • 한국수소및신에너지학회논문집
    • /
    • 제13권1호
    • /
    • pp.83-89
    • /
    • 2002
  • The goal of this research is to understand the NOx emission in direct injected diesel engine with premixed hydrogen fuel. Hydrogen fuel was supplied into the test engine through the intake pipe. Amount of hydrogen-supplemented fuel was 70 % basis on heating value of the total input fuel. The effects of intake air temperature and exhaust gas recirculation(EGR) on NOx emission were studied. The intake air temperatures were varied from $23^{\circ}C$ to $0^{\circ}C$ by using liquid nitrogen. Also, the exhaust gas was recirculated to the intake manifold and the amount of exhaust gas was controlled by the valve. The major conclusions of this work include: ( i ) nitrogen concentrations in the intake pipe were increased by 30% and cylinder gas temperature was decreased by 24% as the intake air temperature were changed from $23^{\circ}C$ to $0^{\circ}C$; ( ii ) NOx emission per unit heating value of supplied fuel was decreased by 45% with same decrease of intake air temperature; and (iii) NOx emission was decreased by 77% with 30% of EGR ratio. Therefore, it may be concluded that EGR is effective method to lower NOx emission in hydrogen fueled engine.

Performance Analysis of an Inert Gas Generator for Fire Extinguishing

  • 김수용
    • 연구논문집
    • /
    • 통권29호
    • /
    • pp.5-15
    • /
    • 1999
  • Present study deals with performance analysis of an inert gas generator (IGG) which is to be used as an effective mean to suppress the fire. The IGG uses a turbo jet cycle gas turbine engine to generate inert gas for fire extinguishing. It is generally known that a lesser degree of oxygen content in the product of combustion will increase the effectiveness of fire suppressing. An inert gas generator system with water injection will bring advantages of suffocating and cooling effects which are considered as vital factors for fire extinguishing. As the inert gas is injected to the burning site, it lowers the oxygen content of the air surrounding the flame as well as reduces the temperature around the fire as the vapour in the inert gas evaporates during the time of spreading. Some important aspects of influencing parameters, such as, air excess coefficient. $\alpha$, compressor pressure ratio, $ pi_c$, air temperature before combustion chamber, $T_2$, gas temperature after combustion chamber, $T_3$, mass flow rate of water injection, $M_w$, etc., on the performance of IGG system are investigated. Calculations of total amount of water needed to reduce the turbine exit temperature to pre-set nozzle exit temperature employing a heat exchanger were made to compare the economics of the system. A heat exchanger with two step cooling by water and steam is considered to be better than water cooling only. Computer programs were developed to perform the cycle analysis of the IGG system and heat exchanger considered in the present study.

  • PDF