• Journal of Advanced Marine Engineering and Technology
• /
• 제32권3호
• /
• pp.421-429
• /
• 2008

Various kinds of ship are operated to transport cargo or passengers at sea in the world. Most of the important auxiliary machineries installed in those ships are fluid machineries such as pumps, compressors, and fans. A large percentage of fluid machinery is pumps which are classified turbo and positive displacement pumps. This paper analyzes only positive displacement pumps. This thesis has two aims: (a) to analyze the present status of pumps installed in merchant and training ships and (b) to find the correlation among sea going pump kW, port pump kW, total pump kW, GE kW, ME MCR, number of pumps, ME kgf, pump kgf. Based on ship's type, this paper seeks to find special characteristics as a result of analyzing head, flow rate, and kW. Moreover this paper analyzes and compares number of pumps, pump kW/ME MCR, pump kW/GE kW under the conditions of seagoing and berthing according to ship's type.

• Steel and Composite Structures
• /
• 제15권2호
• /
• pp.175-202
• /
• 2013

The super convergent laminated composite beam element is newly derived for the lateral stability analysis. For this, a theoretical model of the laminated composite beams is developed based on the first-order shear deformation beam theory. The present laminated beam takes into account the transverse shear and the restrained warping induced shear deformation. The second-order coupling torque resulting from the geometric nonlinearity is rigorously derived. From the principle of minimum total potential energy, the stability equations and force-displacement relationships are derived and the explicit expressions for the displacement parameters are presented by applying the power series expansions of displacement components to simultaneous ordinary differential equations. Finally, the member stiffness matrix is determined using the force-displacement relationships. In order to show accuracy and superiority of the beam element developed by this study, the critical lateral buckling moments for bisymmetric and monosymmetric I-beams are presented and compared with other results available in the literature, the isoparametric beam elements, and shell elements from ABAQUS.

• 한국전기전자재료학회논문지
• /
• 제21권1호
• /
• pp.49-52
• /
• 2008

In this study, multilayer structured ultrasonic linear motor was simulated using Atila for investigating its optimum driving conditions. The ultrasonic linear motors mainly consist of an ultrasonic vibrator to generate elliptical displacement. The ultrasonic linear motor simulated in this paper was the use of the 1st longitudinal(Ll) and 4th bending vibrations (B4). Whit the increase of the number of piezoelectric actuator layers, displacement of node was increased. Maximum total displacement of node was about $3,91{\mu}m$ at the 13 layered ultrasonic motor under 5 V.

• Structural Engineering and Mechanics
• /
• 제7권1호
• /
• pp.111-126
• /
• 1999

The work presented here focuses on the development of suitable discretised formulations, for large-displacement shape and non-shape design sensitivity analysis (DSA), which enable the straightforward incorporation of structural optimisation into established finite element analysis (FEA) codes. For the generalised displacement-based functional the design sensitivity vector has been expressed in terms of displacement sensitivity. The Total Lagrangian formulation is utilised for modelling of large deformation of truss structures. The variational formulation of the sensitivity analysis procedure is discretised by using "pseudo" - finite elements, Results are presented for the sensitivity analysis and optimisation of standard truss structures. For the purposes of this work, the analysis and optimisation procedures outlined below are incorporated into the FEA code ABAQUS.

• Nuclear Engineering and Technology
• /
• 제30권3호
• /
• pp.202-211
• /
• 1998

Interfacial stresses at two-material interfaces and initial displacement field over the entire domain are obtained by modifying the potential energy functional with a penalty function, which enforces continuity of the stresses at the interface of two materials. Based on the initial displacement field and interfacial stresses, a new methodology to generate a continuous stress field over the entire domain has been proposed by combining the modified projection method of stress-smoothing and Loubignac's iterative method of improving the displacement field. Stress analysis is carried out on two examples made of dissimilar materials : one is a two-material cantilever composed of highly dissimilar materials and the other is a zirconium-lined cladding tube made of slightly dissimilar materials. Results of the analysis show that the proposed method provides an improved continuous stress field over the entire domain, and accurately predicts the nodal stresses at the interface, while the conventional displacement-based finite element method produces significant stress discontinuities at the interface. In addition, the total strain energy evaluated from the improved continuous stress field converges to the exact value in a few iterations.

• Nuclear Engineering and Technology
• /
• 제51권3호
• /
• pp.915-921
• /
• 2019

Radiation damage due to neutrons has been calculated in Ni-based alloys in Wolsong CANDU reactor environments. Two damage parameters are considered: displacement damage, and transmutation gas production. We used the SPECTER and SRIM computer codes in quantifying radiation damage. In addition, damage caused by Ni two-step reactions was considered. Estimations were made for the annulus spacers in a CANDU reactor that are located axially along a fuel channel and made of Inconel X-750. The calculation results indicate that the transmutation gas production from the Ni two-step reactions is predominant as the effective full power year increases. The displacement damage due to recoil atoms produced from Ni two-step reactions accounts for over 30% out of the total displacement damage.

• 한국터널지하공간학회 논문집
• /
• 제9권3호
• /
• pp.229-240
• /
• 2007

터널 및 지하공간 시공 중 일상계측에서의 계측관리 효율성 및 고급의 내공변위 분석을 위해 3차원 광파기, 선단앵커정착형 타겟부착장치, 절대변위 계측관리 프로그램으로 구성된 3차원 절대변위 계측시스템을 구축하였다. 본 연구를 통해 3차원 절대변위 계측에 필요한 광파기의 종류와 사양을 제시하였고, 기존 타겟부착장치의 문제점을 개선한 선단앵커정착형 타겟부착장치에 대한 성능시험을 수행하여 우수한 시준거리와 측정정밀도를 확인하였다. 또한 절대변위 계측관리 프로그램에 대한 현장성능시험을 수행하여 얻어진 경향선/영향선 등 다양한 분석방법을 활용하여 막장전방의 연약대 존재 예측이 가능하였고, TSP탐사결과와 비교하여 정확성을 확인하였다.

• Archives of Plastic Surgery
• /
• 제43권5호
• /
• pp.430-437
• /
• 2016

Background Accurate breast volume assessment is a prerequisite to preoperative planning, as well as intraoperative decision making in breast reconstruction surgery. The use of three-dimensional surface imaging (3D scanning) to assess breast volume has many advantages. However, before employing 3D scanning in the field, the tool's validity should be demonstrated. The purpose of this study was to confirm the validity of 3D-scanning technology for evaluating breast volume. Methods We reviewed the charts of 25 patients who underwent breast reconstruction surgery immediately after total mastectomy. Breast volumes using the Axis Three 3D scanner, water-displacement technique, and magnetic resonance imaging (MRI) were obtained bilaterally in the preoperative period. During the operation, the tissue removed during total mastectomy was weighed and the specimen volume was calculated from the weight. Then, we compared the volume obtained from 3D scanning with those obtained using the water-displacement technique, MRI, and the calculated volume of the tissue removed. Results The intraclass correlation coefficient (ICC) of breast volumes obtained from 3D scanning, as compared to the volumes obtained using the water-displacement technique and specimen weight, demonstrated excellent reliability. The ICC of breast volumes obtained using 3D scanning, as compared to those obtained by MRI, demonstrated substantial reliability. Passing-Bablok regression showed agreement between 3D scanning and the water-displacement technique, and showed a linear association of 3D scanning with MRI and specimen volume, respectively. Conclusions When compared with the classical water-displacement technique and MRI-based volumetry, 3D scanning showed significant reliability and a linear association with the other two methods.

• 한국가스학회지
• /
• 제18권2호
• /
• pp.10-15
• /
• 2014

본 연구에서는 원통형 중공롤러를 갖는 와이어 소 머신에 대한 변위와 응력강도 안전성 해석결과를 제시하고 있다. 유한요소법을 사용하여 세 개의 튜브 사이에 Y형상의 편위형 컬럼과 수직형 컬럼을 설치한 중공롤러에서 변형거동과 응력강도 안전성을 높인 중공롤러를 개발하고자 한다. 동일한 직경과 길이를 갖지만, 중량을 달리하는 중공롤러 모델에서 Y 형상의 편위형 및 수직형 중공롤러에 작용하는 변위거동 안전성은 중공롤러의 전체길이에 의해 더 많은 영향을 받는 것으로 나타는데, 이것은 중공롤러의 굽힘 모멘트와 밀접한 관련이 있다. 그러나, 중공롤러의 응력강도는 중량 차이가 크지 않을 경우 절단면의 형상에 의해 더 큰 영향을 받는 것으로 나타났다. 따라서, 중공롤러의 강도안전성을 높이고, 총중량을 낮추기 위해서는 Y형상을 갖는 중공롤러를 사용하는 것이 바람직함을 알 수 있다.

• 대한토목학회논문집
• /
• 제30권3A호
• /
• pp.257-264
• /
• 2010

일반적으로 대형구조물의 건전성평가에 있어 중요한 인자인 변위를 추정함으로써 구조물의 성능 저하 및 노후도를 판단하는 근거가 된다. 그러나 변위응답의 계측이 중요함에도 불구하고 계측 방법의 부재로 말미암아 현수교와 같은 대형구조물의 변위응답을 측정하는 방법이 용이치 않은 것이 현실이다. 본 논문에서는 변형률신호로부터 변위응답을 추정하는 방법인 모드분해기법을 제시하였다. 모드분해기법은 등가정적 변위응답과 구조물의 주요거동을 나타내는 저차모드의 변위응답을 합하여 최종변위응답을 추정하는 방법이다. 변형률신호의 계측시 전기저항식 변형률센서를 사용할 경우 전기적 노이즈 문제가 발생할 소지가 크며, 측점이 많아질수록 경제적 부담감이 커진다. 이런 문제점을 극복하기 위하여 전기적 노이즈의 영향이 없고 다중측정이 가능한 광섬유 브래그 격자 센서를 사용하였다. 현수교와 플레이트거더교의 동재하실험을 통하여 모드분해기법의 사용성을 검토하였다.