DOI QR코드

DOI QR Code

모드분해기법을 이용한 변위응답추정 알고리즘의 실교량 적용

Applications of Displacement Response Estimation Algorithm Using Mode Decomposition Technique to Existing Bridges

  • 장성진 (부산대학교 사회환경시스템공학과) ;
  • 김남식 (부산대학교 사회환경시스템공학부)
  • 투고 : 2009.11.10
  • 심사 : 2010.04.05
  • 발행 : 2010.06.30

초록

일반적으로 대형구조물의 건전성평가에 있어 중요한 인자인 변위를 추정함으로써 구조물의 성능 저하 및 노후도를 판단하는 근거가 된다. 그러나 변위응답의 계측이 중요함에도 불구하고 계측 방법의 부재로 말미암아 현수교와 같은 대형구조물의 변위응답을 측정하는 방법이 용이치 않은 것이 현실이다. 본 논문에서는 변형률신호로부터 변위응답을 추정하는 방법인 모드분해기법을 제시하였다. 모드분해기법은 등가정적 변위응답과 구조물의 주요거동을 나타내는 저차모드의 변위응답을 합하여 최종변위응답을 추정하는 방법이다. 변형률신호의 계측시 전기저항식 변형률센서를 사용할 경우 전기적 노이즈 문제가 발생할 소지가 크며, 측점이 많아질수록 경제적 부담감이 커진다. 이런 문제점을 극복하기 위하여 전기적 노이즈의 영향이 없고 다중측정이 가능한 광섬유 브래그 격자 센서를 사용하였다. 현수교와 플레이트거더교의 동재하실험을 통하여 모드분해기법의 사용성을 검토하였다.

Generally, estimations on the displacement as an important factor in evaluating the safety of large structures could be a barometer assessing whether the condition of the structure is deteriorating. Practically, it is not easy how to measure the displacement response to large structures like suspension bridges. In this study, as a method for estimation displacement response from strain signals, mode decomposition technique is proposed. Total displacement response is estimated by superposing quasistatic displacement response and modal displacement responses in dominant modes with larger contributions after estimating the modal displacement responses. If foiled strain gauges are used to measure strain signals, there would likely to generate electric noise, what's more, the more measuring points there are the more economic burden it could be. In order to solve such problems, fiber optic bragg-grating(FBG) sensors were used, which have multi-point measurements with no effect on electric noises. Therefore, the experiment was performed through dynamic load test of suspension bridge and plate-girder bridge to review the possibility for using mode decomposition technique.

키워드

참고문헌

  1. 신수봉, 윤병구(2008) 측정변형률에서 동적변위 식별, 2008년도 봄 학술발표 논문집, 한국구조물진단유지관리공학회, pp. 447-451.
  2. 장성진, 김남식(2008) 모드분해기법을 이용한 동적 변형률신호로부터 변위응답추정, 대한토목학회논문집, 대한토목학회, 제28권 제4A호, pp. 507-515.
  3. 조남소, 김남식(2008) FBG 변형률센서를 이용한 현수교의 정적처짐형상 추정. 대한토목학회논문집, 대한토목학회, 제28권 제5A호, pp. 699-707.
  4. 최은수, 강동훈, 정원석, 김이현(2006) FBG센서 응답을 이용한 단순보의 변위 추정. 2006년도 한국강구조학회학술발표논문집, 한국강구조학회, pp. 349-354.
  5. 홍윤화, 박현우, 이성욱, 이해성(2006) 구조물의 계측가속도를 이용한 변위 재구성에서의 정규화 기법. 2006년도 학술발표회논문집, 대한토목학회, pp. 338-341.
  6. Lee, J.J. and Shinozuka, M. (2006) Real-time displacement measurement of a flexible bridge using digital image processing techniques. Experimental Mechanics, Vol. 46, pp. 105-114. https://doi.org/10.1007/s11340-006-6124-2
  7. Kim, N.S. and Cho, N.S. (2004) Estimating deflection of a simple beam model using fiber optic bragg-grating sensors. Experimental Mechanics, Vol. 44, No. 4, pp. 433-439. https://doi.org/10.1007/BF02428097
  8. Huang, N.E., Shen, Z., Long, S.R., Wu, M.C., Shih, H.H., Zheng, Q., Yen, N.-C., Tung, C.C., and Liu, H.H. (1998) The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proceedings of the Royal Society of London Series A, Vol. 454, pp. 903-995. https://doi.org/10.1098/rspa.1998.0193
  9. Berkooz, G., Holms, P., and Lumley, J. (1993) The proper orthogonal decomposition in the analysis of turbulent flows. Annual Review of Fluid Mechanics, Vol. 25, pp. 539-575. https://doi.org/10.1146/annurev.fl.25.010193.002543