• Journal of Korean Society on Water Environment
• /
• v.27 no.2
• /
• pp.228-234
• /
• 2011

The goal of water quality management on stream and watershed is to focus not on discharged loads management but on a water quality management. Discharged loads management is not goal of water quality management but way for perform with total maximum daily loads management. It is necessary to estimate the relation between non-point source with stromwater runoff (NPSSR) and water quality to select a watershed where it is required to manage NPSSR for water quality improvement. To evaluate the effects of NPSSR on stream's water quality, we compare the aspects of water quality in dry and wet seasons using flow duration curve analysis based on flow rate variation data by actual surveying. In this study we attempt to quantify the variation characteristic of water quality and estimate the Inflow characteristic of pollution source with water quality and flow rate monitoring on 10 watersheds. We try to estimate water quality and flow rate by regression analysis and try again regression analysis with each high and low water quality data more than estimations. An analysis of relation between water quality and flow rate of 10 watersheds shows that the water quality of the Nonsan and the Ganggyeong streams had been polluted by NPSSR pollutants. Other eight streams were important point source more than NPSSR. It is wide variation range of $BOD_5$ also high average concentration of $BOD_5$. We have to quantify water quality variation by cv1 in wet season and cv365 in dry season with comparing the estimate of high water quality and low water quality. This method can be used to indicator for water quality variation according to flow rate.

• Journal of Forest and Environmental Science
• /
• v.28 no.4
• /
• pp.242-246
• /
• 2012

The variation in random amplified polymorphic DNA (RAPD) markers were examined for Xanthoceras sorbifolium Bunge seeds from three plantations (Inner Mongolia [IM], Liaoning [LN], and Shandong [SD] province) in China. Mean genetic variation was measured by polymorphism percentage (42.10%) and expected heterozygosity (He=1.27). Among three populations, Shandong showed the highest values both in polymorphism percentage and heterozygosity (p=57.89; Ho=1.58; and He=1.37). Total genetic diversity value, based on the total loci, was estimated as total genetic diversity of the species (Ht)=0.27 and mean within-population genetic diversity (Hs)=0.16. UPGMA cluster analysis showed the genetic closeness between Inner Mongolia and Liaoning population, but that Shandong seems to be the separate population.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.27-32
• /
• 2013

Shape From Focus (SFF) is a passive optical technique to recover 3D structure of an object that utilizes focus information from 2D images of the object taken at different focus levels. Mostly, SFF methods use a single focus measure to compute image focus quality of each pixel in the image sequence. However, it is difficult to recover accurate 3D shape using a single focus measure, as different focus measures perform differently in diverse conditions. In this paper, a nonlinear Total Variation (TV) based approach is proposed for 3D shape recovery. To improve the result of surface reconstruction, several initial depth maps are obtained using different focus measures and the resultant 3D shape is obtained by diffusing them through TV. The proposed method is tested and evaluated by using image sequences of synthetic and real objects. The results and comparative analysis demonstrate the effectiveness of our method.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.226-234
• /
• 2016

Electrical resistance tomography (ERT) is an imaging technique where the internal resistivity distribution inside an object is reconstructed. The ERT image reconstruction is a highly nonlinear ill-posed problem, so regularization methods are used to achieve desired image. The reconstruction outcome is dependent on the type of regularization method employed such as l2-norm, l1-norm, and total variation regularization method. That is, use of an appropriate regularization method considering the flow characteristics is necessary to attain good reconstruction performance. Therefore, in this paper, regularization methods are tested through numerical simulations with different flow conditions and the performance is compared.

• Journal of Magnetics
• /
• v.21 no.4
• /
• pp.593-598
• /
• 2016

In order to reduce the amount of noise component in X-ray imaging system, various reduction techniques were frequently used in the field of diagnostic imaging. Although the previous techniques -such as median, Wiener filters and Anscombe noise reduction technique - were able to reduce the noise, the edge information was still damaged. In order to cope with this problem, total variation (TV) noise reduction technique has been developed and researched. The purpose of this study was to evaluate and compare the image quality using normalized noise power spectrum (NNPS) and contrast-to-noise ratio (CNR) through simulations and experiments with respect to the above-mentioned noise reduction techniques. As a result, not only lowest NNPS value but also highest CNR values were acquired using a TV noise reduction technique. In conclusion, the results demonstrated that TV noise reduction technique is proved as the most practical method to ensure accurate denoising in X-ray imaging system.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.3
• /
• pp.8-13
• /
• 2023

High bandwidth memory a core technology of the future memory semiconductor industry, is attracting attention. Temporary bonding and debonding process technology, which plays an important role in high bandwidth memory process technology, is also being studied. In this process, total thickness variation is a major factor determining wafer performance. In this study, the reliability of the equipment measuring total thickness variation is identified, and the servo motor settling, and wafer total thickness variation measurement accuracy are analyzed. As for the experimental variables, vacuum, acceleration time, and speed are changed to find the most efficient value by comparing the stabilization time. The smaller the vacuum and the larger the radius, the longer the settling time. If the radius is small, high-speed rotation performance is good, and if the radius is large, low-speed rotation performance is good. In the future, we plan to conduct an experiment to measure the entire of the wafer.

• Korean Journal of Microbiology
• /
• v.22 no.3
• /
• pp.157-165
• /
• 1984

Seasonal and spatial variations in propagule numbers of Trichoderma species were investigated every other month for one year in deciduous and coniferous forest soils and evaluated the relationships of Trichoderma spp. populations to soil environmental factors. The total population of Trichoderma spp. increased until summer and then declined until winter. The yearly mean frequency of Trichoderma spp. exceeded 1.4% of total fungal propagules in two sites. Decreases of absolute an relative propagule numbers of Trichoderma spp. with increasing soil depth were found and variation in Trichoderma spp. propagules caused by differences in soil depth ($0{\sim}50cm$) was greater than that caused by differences in sampling time. The most common species occurring in two sites was T. viride, followed by T. polysporum, T. koningii, and T. hamatum. Individual species of Trichoderma showed diferent abundance trend in accordance with sampling time. T. viride was dorminant from spring to autumn, while T. polysporum dominated over the other speicies in winter. Variations in propagule number of Trichoderma sppp. were principally mediated by the actions of biotic environmental factors rather than by the direct effects of abiotic factors. In multiple-regression analyses, 48% of the total vaiation in Trichoderma spp. propagules in deciduous site could be accounted for by total fungal propagules and soil CMCase actvity. In coniferous site, 65% of total variation could be accounted for by total fungal and bacterial propagules, moisture content and organic carbon content.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.975-982
• /
• 2005

The purpose of the Gage R&R study is to determine whether a measurement system is adequate for monitoring a process. If the measurement system variation is small relative to the process variation, then the measurement system is deemed 'adequate'. The sources of variation associated with the measurement system are compared using an analysis of variance (ANOVA) model, in general. A typical ANOVA model used in a standard Gage R&R study is the two-factor random effect model. Then, the ANOVA partitions the total variation into three categories: repeatability, reproducibility, part variation. However, if the process variation possesses the between group variation, within group variation, and within-part variation, these variations can cause the measurement system evaluation to provide misleading results. That is, in the standard Gage R&R study these variations affect the estimate of repeatability, reproducibility, or both. This paper presents a four-factor nested factorial ANOVA model which explicitly considers these variations for the Gage R&R study. The variance component estimates are derived by setting the EMS equations equal to the corresponding mean square from the ANOVA table and solving. And the proposed model is compared with the standard Gage R&R model.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1554-1560
• /
• 2012

In this paper, the even harmonic current(2nd, 4th, 6th, 8th) of the arc fault current and normal current were measured in computer load and analyzed. The BPF with GIC was developed to detection of harmonic, the exact center frequency and a high degree of sharpness could be easily obtained. The total even harmonic distortion due to series arc fault in computer load was 31.2%, this value was increased 3.9 times better than the total even harmonic distortion of normal current. The results of analysis of arc fault current RMS variation rate and Peak variation rate per half-cycle, The RMS average variation rate are as follows ; the 2nd harmonic was 0.24, the 4th harmonic was 0.15, the 6th harmonic was 0.19, the 8th harmonic was 0.25, respectively. The Peak average variation rate are as follows ; the 2nd harmonic was 0.19, the 4th harmonic was 0.12, the 6th harmonic was 0.13, the 8th harmonic was 0.15, respectively. The results of this analysis utilize data to detect of series arc fault on wiring of computer load.

• Journal of Korean Society on Water Environment
• /
• v.28 no.4
• /
• pp.574-581
• /
• 2012

It is important to analyze the status of water quality with relation to the stream flow to attain water quality goal more effectively in the unit watersheds for the management of Total Maximum Daily Loads (TMDLs). This study developed a flow duration-water quality distribution graph to figure out water quality appearances on the flow variation and analyzed contributions of water quality observations to the impaired water bodies quantitatively by hydrologic conditions. Factors relating to water quality variation can be analyzed more precisely and assessed on the base of quantified contributions. It is considered that this approach could be utilized to establish a more effective plan for the water quality improvement including the prioritization of pollution reduction options.