• KCI Concrete Journal
• /
• v.13 no.1
• /
• pp.69-78
• /
• 2001

The inelastic behavior of a reinforced concrete columns is influenced by a number of factors : 1) level of axial load, 2) tie spacing, 3) volumetric ratio of lateral steel, 4) concrete strength, 5) distribution of longitudinal steel, 6) strength of lateral steel, 7) cover thickness, 8) configuration of lateral steel, 9) strain gradient, 10) strain rate, 11) the effectively confined concrete core area, and 12) amount of longitudinal steel. A new constitutive model of a confined concrete is suggested in order to investigate the nonlinear behavior of the reinforced concrete columns under concentric loading. The developed constitutive model for the confined concrete takes into account the effects of effectively confined area as well as the horizontal and longitudinal distributions of the confining pressures. None of the existing models incorporated these two main effects at the same time. A total of different six constitutive models for the behavior of the confined concrete under concentric compression were compared with the sixty-one test results reported by different researchers. The superiority of the developed model in its accuracy is demonstrated by evaluating the error function, which compares the weighted averages for the sum of squared relative differences in peak compressive strength and corresponding strain, stress at strain equal to 0.015, and total area under stress-strain curve up to strain equal to 0.015.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.133-141
• /
• 2006

The Low cycle fatigue behavior of 11.7Cr-1.1Mo heat-resisting steel has been investigated under strain-controlled conditions with mean stresses at room temperature and $300^{\circ}C$. For the tensile mean stress test, the initial high tensile mean stress generally relaxed to zero at room temperature, however, at $300^{\circ}C$ initial tensile mean stress relaxed to compressive mean stress. Low cycle fatigue lives under mean stress conditions are usually correlated using modifications to the strain-life approach. Based on the fatigue test results from different stain ratio of -1, 0, 0.5, and 0.75 at room temperature and $300^{\circ}C$, the fatigue damage of the steel was represented by using cyclic strain energy density. Total strain energy density considering mean stress indicated well better than not considering mean stress at $300^{\circ}C$. Predicted fatigue life using Smith-Watson-Topper's parameter correlated fairly well with the experimental life at $300^{\circ}C$.

• Microbiology and Biotechnology Letters
• /
• v.23 no.4
• /
• pp.461-471
• /
• 1995

The heterofermentative Leuconostoc mesenteroides, which is propagated from the initial to the intermediate stage of Kimchi fermentation, produces organic acids and carbon dioxide to impart refreshment, weak acid taste to Kimchi. But owing to lactic acid production by the homofermentative Lactobacillus Plantarum, Kimchi finally reaches its acidified state. So, Leu. mesenteroides was isolated from Kimchi and identified and was improved by mutation for carbon dioxide production at low pH, and for the high total acceptability. We tested with a wild-type strain K-1 and its improved mutant strain M-10 of Leu. mesenteroides. The wild-type strain K-1 could grow in pH 4.2 at 30$\circ$C or 20$\circ$C, and in pH 5.0 at 10$\circ$C. But the mutant strain M-10 could grow in pH 3.3 at 10$\circ$C. In the respect of total acceptability, mutant strain M-10 inoculated Kimchi was ever better than any others. Mutant M-10 inoculated Kimchi prolonged the optimum ripening period of Kimchi up to two times as compared with the control group.

• Korean Journal of Materials Research
• /
• v.6 no.6
• /
• pp.561-567
• /
• 1996

The grain size effect on grain boyndary cracking in Pb-Sn eutectic during isothermal fatigue was investigated. Fatigue experiments were confined to two conditions : (1) 0.4% total strain range(approximetely 0.2% plastic strain range), 1.67$\times$10$^{-3}$/s frequency; and (2) 1.5% total strain rante(approximately 1.2% plastic strain range), 8.33$\times$10$^{-4}$/s frequency. Fatigue specimens were cross-sectioned to monitor the depth of crack growth continuosly and then, the maximum crack depths in units of the number of boundaries were plotted as functions of number of cycles for these two different strain ranges. The results revealed that the rate of crack growth(per cycle at fixed rate of crosshead motion) can be expressed as dc/dN=($\Delta$$\varepsilon$$_p$)$^n$c where n is typically 2, c is the crack length, $\Delta$$\varepsilon$$_p$ is the plastic strain range, and A is a "constant" that depends on whether the crack is deeper or shallower than its first triple point of the grain boundary, A decrdases by about a factor of three after the crack hits the first triple point, indecating that the fatigue crack is trapped at the triple point of the grain boundaries.

• Journal of Ocean Engineering and Technology
• /
• v.12 no.1
• /
• pp.76-84
• /
• 1998

In this 1st report, the relationship between pure creep properties and initial strain was studied and also its acoustic emission test was performed during creep test at 500, 600 and $700^{\circ}C$. And the applicability of the acoustic emission technique was investigated to analyze the quantitive relationship between all the pure properties (creep strength, creep repture time or creep life, steady state creep rate, total creep rate, creep strain, total creep strain, etc.) and the initial strains as well as to analyze AE properties during the pure creep loading condition.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.4
• /
• pp.171-178
• /
• 1996

DCB(pure mode I) and CLS(mixed mode) tests were performed to investigate the effect of fracture mode on the interlaminar fracture of composite laminate. Mode I critical strain energy release rate was found to be $133J/m^2$ from the DCB test and total strain energy release rate decreased from $1, 270J/m^2$ as thickness ratio(tl/t) varied from 0.333 to 0.667 from the crease from the CLS test. Crack length had no effect on the total strain energy release rate and load was almost constant during the crack growth of the specimen which had the specific thickness ratio. Crack initiated when the stress of the strap ply reached constant stress $42kgf/mm^2$ which was found to be independent of the thickness ratio.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.1
• /
• pp.131-139
• /
• 1993

Low cycle fatigue characteristics of cast aluminum alloy A356 with a yield strength and ultimate strength of 229 and 283 MPa respectively was evaluated using smooth axial specimen under strain controlled condition. Reversals to failure ranged from 16 to 107. The cast aluminum alloy exhibited cyclically strain-gardening behavior. The results of low cycle fatigue tests indicated that the conventional low cycle fatigue tests indicated that the conventional low cycle fatigue life model was not a satisfactory representation of the data. This occurred because the elastic strain-life curve was not-log-log linear and this phenomena caused a nonconservative and unsafe fatigue life prediction at both extremes of long and short lives. A linear log-log total strain-life model and a bilinear log-log elastic strain-life model were proposed in order to improve the representation of data compared to the conventional low cycle fatigue life model. Both proposed fatigue life models were statistically analyzed using F tests and successfully satisfied. However, the low cycle fatigue life model generated by the bilinear log-log elastic strain-life equation yielded a discontinuous curve with nonconservatism in the region of discontinuity. Among the models examined, the linear log-log total strain-life model provided the best representation of the low cycle fatigue data. Low cycle fatigue life prediction method based on the local strain approach could conveniently incorporated both proposed fatigue life models.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.2
• /
• pp.116-128
• /
• 2022

Objectives: The aim of this study was to examine the association of working posture with headache/eye strain in Korean waged workers. Methods: Data were collected from the 5th Korean Working Condition Survey. A total of 30,955 workers participated in this study. A four-items of working postures were measured using a 7-point Likert scale, and we categorized them into three groups ('normal', 'moderate', and 'severe') each 4 items. Headache/eye strain were measured using a self-administrative questionnaire ('yes' vs. 'no'). To examine the relationship between the total working postures score and headache/eye strain, we summed a 4-items of working postures. It was categorized into five groups according to the severity of exposures('normal', 'mild', 'moderate', 'severe', and 'very severe'). The multivariate logistic regression analysis was performed using the IBM SPSS(Ver. 25), and a p<.05 was considered significant. Results: The results show that 'fatiguing and painful posture' and 'posture repetitively using hands or arms' were associated with headache/eye strain after controlling for control variables. The total working posture score was positively associated with headache/eye strain. People with higher levels of the total working posture score were more likely to increase the risk of headache/eye strain compared to those of normal(OR: 1.844, 95% CI: 1.549~2.195 for 'mild'; OR: 2.564, 95% CI: 2.152~3.503 for 'moderate'; OR: 4.140, 95% CI: 3.432~4.994 for 'severe'; OR: 7.613, 95% CI: 5.625~10.304 for 'very severe') (p<.05 for trend). Conclusions: These results indicate that inappropriate working postures might play a crucial role in developing headache/eye strain. It is needed to improve the working environment, especially focusing on reducing inappropriate working posture at the organizational level.

• Applied Biological Chemistry
• /
• v.48 no.3
• /
• pp.228-232
• /
• 2005

A yeast strain producing phytase, isolated from a mash of Korean traditional Yakju, was identified as a strain of Saccharomyces cerevisiae and designated as Saccharomyces cerevisiae CY strain. Phytase was produced by CY strain both intracellularly and extracellularly. Total phytase activity by the shaking culture was about two times higher than that of the static culture. The portion of extracellular phytase to total phytase activity ranged between 23 and 49 percent, depending on the glucose concentration in the culture medium. Phytase production was reached at approximately 1 U/ml as total phytase activity and the maximum intracellular phytase activity was 0.17-0.19 U/mg-DCW at late logarithmic growth phase. The optimum reaction pH and temperature of intracellular phytase were 3.5 and $40^{\circ}C$, respectively. Over 95% of the phytate was degraded by growing cells after 36 hours yeast cell culture and about 90% of total phytate was effectively degraded by suspending the whole cell with the biomass of 0.4 mg-DCW/ml-reaction solution after 12 hours degradation reaction.

• Journal of Species Research
• /
• v.10 no.4
• /
• pp.336-343
• /
• 2021

In 2020, as a subset study to discover indigenous yeast species in Korea, a total of 22 yeast species were isolated from soil samples collected in Gwangju-si, Gyeonggi-do. Among them, 10 strains were unreported species. From the high 26S rRNA gene sequence similarity and formation of a robust phylogenetic clade with the closest species, it was determined that each strain belonged independent and predefined yeast species. The 22 strains were assigned to the genera Dothiora (1 strain), Sarocladium (1 strain), Tetrapisispora (1 strain) and Torulaspora (2 strains) of the phylum Ascomycota; the genera Erythrobasidium (1 strain), Leucosporidium (4 strains), Ustilentyloma (2 strains), Fellozyma (1 strain), Sampaiozyma (2 strains), Filobasidium (1 strain), Solicoccozyma (2 strains) and Vishniacozyma (4 strains) of the phylum Basidiomycota. This is the first official report of the following species in Korea: Dothiora cannabinae (1 strain), Sarocladium strictum (1 strain), Fellozyma inositophila (1 strain), Filobasidium magnum (1 strain), Solicoccozyma phenolicus (1 strain), Solicoccozyma terreus(1 strain), Vishniacozyma tephrensis(1 strain) and Vishniacozyma victoriae (3 strains). Cell morphology, phenotypic features and biochemical features are described in the Species Description section.