• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.754-759
• /
• 2004

We have studied the fringe field switching (FFS) mode with the positive dielectric anisotropy for the fast response time. The factors such as the physical properties of the LC, the cell gap, and the rubbing angle were critical for the fast response time of the FFS mode. The response time became 10 ms faster when the rotational viscosity of the new LC is 20 mPa.s lower than the conventional LC. When the cell gap changed from 3.6 ${\mu}{\textrm}{m}$ to 3.0 ${\mu}{\textrm}{m}$, it was possible to achieve the total response time and response times associated with grey-to-grey transitions under 16 ms. And the response times including grey-to-grey transitions become fast as the rubbing angle decreases.

• 운동영양학회지
• /
• 제23권2호
• /
• pp.34-44
• /
• 2019

[Purpose] The composition of protein supplements, the consumption timing immediately before and after resistance exercise training (RET), and the quantity of protein supplementation may be important factors for the im-provement of muscle mass and function. Although these factors should be considered comprehensively for effective improvement of muscular function in protein supplementation, relatively few studies have focused on this area. Therefore, this study was designed to investigate whether a protein blend supplement before and after resistance exercise for 12 weeks would be effective in increasing muscular function. [Methods] In total, 18 participants were randomly assigned to a placebo (PLA) or protein blend supplement (PRO) group. All subjects followed the same training routine 3 times per week for 12 weeks, taking placebo or protein supplements immediately before and after each exercise session. The protein supplement consisted of 40 g of blend protein, including hydrolyzed whey protein. The RET consisted of lower body (barbell squat, dead lift, seated leg extension, and lying leg curl) and upper body (bench press, barbell rowing, preacher bench biceps curl, and dumbbell shoulder press) exercises. A repetition was defined as three sets of 10-12 times with 80% of one repetition maximum (1RM). [Results] Although the PRO group had a lower protein intake in terms of total food intake than the PLA group, the mean changes in muscle circumference, strength, and exercise volume increased, especially at week 12, compared to the PLA group. [Conclusion] These results suggest that the composition and timing of protein intake are more important than the total amount.

• 한국프랜차이즈경영연구
• /
• 제12권1호
• /
• pp.45-55
• /
• 2021

Purpose: How to build the positive emotion of customer is very important, because it affects the positive attitude. Brand evidence has a significant impact on consumer behavior in terms of reinforcing consumers' perception of food service companies and differentiating them from competing brands. Thus, this study examines the effect of brand evidence on emotion (positive emotion and negative emotion), and attitude in restaurant industry. Research design, data, and methodology: This study examines the structural relationship among brand evidence, emotion, and attitude. Brand evidence divide into three sub-dimensions such as physical evidence, core service, and employee service. In order to test the purposes of this study, research model and hypotheses were developed. The questionnaire items were modified and used according to the content of this study based on previous studies. All constructs were measured by multiple items tested and developed in the previous research. The data were collected from 439 restaurant users from Seoul area were analyzed using SPSS 22.0 and SmartPLS 3.0 program. A total of 460 questionnaires were distributed and a survey was conducted for 4 weeks, and a total of 439 were used for analysis, excluding non-response data and 21 unusable response data among the collected questionnaires. Frequency analysis was conducted to identify the general characteristics of the survey subjects. To measure the reliability and validity of the measurement tools, confirmatory factor analysis was conducted. Structural model analysis was conducted to verify the research model. Result: The findings demonstrate that physical evidence, core service, employee service had positive effects on positive emotion. And core service and employee service had negative effects on negative emotion while physical evidence did not have. Also, positive emotion had positive effect on attitude and negative emotion had negative effect on attitude. Conclusions: The findings of this study provide guidelines on how to enhance competitiveness in restaurant industry through understanding brand evidence's effects on raising perceived consumer's emotion and attitude. Therefore, food service companies should establish a marketing strategy that can stimulate positive emotions through brand evidence, which is all factors related to service brands that influence consumers' evaluation of service products and purchase decision-making process.

• 한국식생활문화학회지
• /
• 제25권4호
• /
• pp.456-465
• /
• 2010

The purpose of this study was to understand the interrelationships between customers' perception of service encounter elements, customers' emotional response and customer satisfaction in a family restaurant. Based on a total of 408 samples, this study reviewed the reliability and fitness of the research model and verified a total of 4 hypotheses using the Amos program. The hypothesized relationships of the model were tested simultaneously using a structural equation model (SEM). The proposed model provided an adequate fit to the data, ${\chi}^2$=821.151 (df=333), CMIN/df 2.466, GFI .878, NFI .927, IFI .955, TLI .949, CFI .955, RMSEA .060. The results showed that human factor ($\beta$=.426) and physical factor ($\beta$=.266) as service encounter elements in family restaurants were indicated to have a positive (+) influence on customers' positive emotion. For influence of customers' negative emotion, human factor ($\beta$=-.157) was surveyed to have a negative (-) influence. Also, customers' positive emotion ($\beta$=.716) and negative emotion ($\beta$=-.081) had significant effects on customer satisfaction. Limitations and future research directions are also discussed.

• The Journal of Korean Physical Therapy
• /
• 제14권4호
• /
• pp.412-422
• /
• 2002

The use of biochemical markers of bone turnover may be particular interest in the investigation of bone disorders with osteoporosis. Serum osteocalcin(OC), total alkaline phosphatase and procollagen C, reflecting bone formation, and urinary pyridinium cross-links excretion, reflecting bone reabsorption have been measured in hyperthyroidism, postmenopause women, after testosterone supplementation, androgen, testosterone and estrogen deficiency, bone mineral density degree, age duration. Bone marks which is reflect to metabolic bone disorders are biochemical indices method to measure enzyme activity about bone formation, bone absorption and bone components in blood or urine. Bone metabolism biochemical marks are correlated with osteophorotic agents and also represent significantly different between bone mineral density and bone biochemical marks. Therefore if we develope and use bone metabolism marks which have higher sensitivity and specificity in bone formation and bone absorption, I think that these bone biochemical marks can have utility in the clinical application to predict osteoporosis risk group, bone loss, bone fracture and response degree to treatment of osteoporosis risk groups.

• Earthquakes and Structures
• /
• 제11권1호
• /
• pp.83-107
• /
• 2016

In this study, the response and behavior of machine foundations resting on dry and saturated sand was investigated experimentally. A physical model was manufactured to simulate steady state harmonic load applied on a footing resting on sandy soil at different operating frequencies. Total of (84) physical models were performed. The parameters that were taken into consideration include loading frequency, size of footing and different soil conditions. The footing parameters are related to the size of the rectangular footing and depth of embedment. Two sizes of rectangular steel model footing were used. The footings were tested by changing all parameters at the surface and at 50 mm depth below model surface. Meanwhile, the investigated parameters of the soil condition include dry and saturated sand for two relative densities; 30 % and 80 %. The dynamic loading was applied at different operating frequencies. The response of the footing was elaborated by measuring the amplitude of displacement using the vibration meter. The response of the soil to dynamic loading includes measuring the stresses inside soil media by using piezoelectric sensors. It was concluded that the final settlement (St) of the foundation increases with increasing the amplitude of dynamic force, operating frequency and degree of saturation. Meanwhile, it decreases with increasing the relative density of sand, modulus of elasticity and embedding inside soils. The maximum displacement amplitude exhibits its maximum value at the resonance frequency, which is found to be about 33.34 to 41.67 Hz. In general, embedment of footing in sandy soils leads to a beneficial reduction in dynamic response (displacement and excess pore water pressure) for all soil types in different percentages accompanied by an increase in soil strength.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.146-149
• /
• 2005

Thesedays, the reduction of hand-transmitted vibration of hand-held power tools is important issue for operators' welfare, In the study, frequency response function is measured and vibration total value is evaluated for solving the principle and effect of the BOSCH's vibration-proof handle. This handle functions as a dynamic damper and has the effect, 22% vibration total value reduction under idling condition using a system that consists of a PC with data acquisition system and LabVIEW program. The program in the system makes it possible to evaluate vibration total value according to ISO 5349. This handle offers a good example for figuring out the physical contradiction between the work efficiency and operators' health.

• 산업경영시스템학회지
• /
• 제43권3호
• /
• pp.68-76
• /
• 2020

In a series of recent launch tests, North Korea has been improving the firepower of its missiles that can target South Korea. North Korea's missiles and submarines are capable of threatening targets in South Korea and are likely faster and more covert than the systems previously seen in North Korea. The advanced threats require that ROK Navy should not only detect them earlier than ever but also response quicker than ever. In addition to increasing threats, the number of young man that can be enlisted for military service has been dramatically decreasing. To deal with these difficulty, ROK navy has been making various efforts to acquire a SMART warship having enhanced defense capability with fewer human resources. For quick response time with fewer operators, ROK Navy should improve the efficiency of systems and control tower mounted on the ship by promoting the Ship System Integration. Total Ship Computing Environment (TSCE) is a method of providing single computing environment for all ship systems. Though several years have passed since the first proposal of TSCE, limited information has been provided and domestic research on the TSCE is still in its infancy. In this paper, we apply TSCE with open architecture (OA) to solve the problems that ROK Navy is facing in order to meet the requirements for the SMART ship. We first review the level of Ship System Integration of both domestic and foreign ships. Then, based on analyses of integration demands for SMART warship, we apply real time OA to design architecture for TSCE from functional view and physical view. Simulation result shows that the proposed architecture has faster response time than the response time of the existing architecture and satisfies its design requirements.

• 한국전문물리치료학회지
• /
• 제19권3호
• /
• pp.124-131
• /
• 2012

Most conventional instruments measuring disability rely on total score by simply adding individual item responses, which is dependent on the items chosen to represent the underlying construct (test-dependent) and a test statistic, such as coefficient alpha for the estimate of reliability, varying from sample to sample (sample-dependent). By contrast, item response theory (IRT) method focuses on the psychometric properties of the test items instead of the instrument as a whole. By estimating probability that a respondent will select a particular rating for an item, item difficulty and person ability (or disability) can be placed on same linear continuum. These estimates are invariant regardless of the item used (test-free measurement) and the ability of sample applied (sample-free measurement). These advantages of IRT allow the creation of invariantly calibrated large item banks that precisely discriminate the disability levels of individuals. Computer adaptive testing (CAT) method often requiring a testing algorithm promise a means for administering items in a way that is both efficient and precise. This method permits selectively administering items that are closely matched to the ability level of individuals (measurement precision) and measuring the ability without the loss of precision provided by the full item bank (measurement efficiency). These measurement properties can reasonably be achieved using IRT and CAT method. This article aims to investigate comprehensive overview of the existing disability instrument for back pain and to inform physical therapists of an alternative innovative way overcoming the shortcomings of conventional disability instruments. An understanding of IRT and CAT method will equip physical therapist with skills in interpreting the measurement properties of disability instruments developed using the methods.

• 한국운동역학회지
• /
• 제27권3호
• /
• pp.205-210
• /
• 2017

Objective: The aim of the study was to investigate the age-related ability of dynamic balance recovery through perturbation response during standing. Method: Six older and 6 younger adults participated in this study. External perturbation during standing as pulling force applied at the pelvic level in the anterior direction was provided to the subject. The margin of stability was quantified as a measure of postural stability or dynamic balance recovery, and using principal component analysis (PCA), the regularity of the margin of stability (MoS) was calculated. Results: Our results showed that in the older adult group, 60.99% and 28.63% of the total variance were captured using the first and second principal components (PCs), respectively, and in the younger adult group, 81.95% and 10.71% of the total variance were captured using the first and second PCs, respectively. Conclusion: Ninety percent of the total variance captured using the first two PCs indicates that the older adults had decreased regularity of the MoS than the younger adults. Thus, the results of the present study suggest that aging is associated with non-regularity of dynamic postural stability.