• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.3
• /
• pp.378-383
• /
• 2016

The objective of this study was to determine the effects of chromium methionine (Cr-Met) chelate supplementation on blood metabolites and fatty acid profile of beef from Holstein steers during late fattening period. Fifteen Holstein steers were allotted randomly into two groups including the control (non Cr-Met feeding, NCM, ave. body weight [BW] = $483{\pm}25.7kg$) and the treatment (Cr-Met feeding for 4 months, 4CM, ave. $BW=486{\pm}27.5kg$) group. The feeding amount of Cr-Met to animals was limited to 400 ppb/cow/d and was supplemented to total mixed ration. No difference in blood albumin, alkaline phosphatase, urea-nitrogen, calcium, creatine, glucose, total protein, triglyceride, and cholesterol were observed between the treatment groups (p>0.05). The level of high density lipoprotein was higher in the 4CM group than the NCM group, whereas low density lipoprotein was lower in the 4CM group (p<0.05). The fatty acid composition (caprate, laurate, myristate, pentadecanoate, palmitate, palmitoleate, margarate, cis-11 heptadodecanoate, stearate, oleate, trans-vaccenate, linoleate, cis-11 eicosenoate, docosa hexaenoic acid, and docosa pentaenoic acid) of the beef showed no difference between the two groups (p>0.05). The arachidonic acid level tended to be higher in the 4CM than the NCM group (p = 0.07). Cr-Met had no influence (p>0.05) on the ratio of saturated, unsaturated, unsaturated/saturated, monounsaturated/saturated and polyunsaturated/saturated fatty acids whereas the ratio of polyunsaturated fatty acids (PUFA) in the 4CM group was comparatively higher than the NCM group (p<0.05). This study concluded that feeding Cr-Met supplementation in 400 ppb/d to Holstein steers for 4 months during late fattening period can improve some blood metabolites and beef quality by increasing PUFA and gamma-linoleate compositions of beef.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.12
• /
• pp.1726-1733
• /
• 2012

The effect of genotype, fibre level and fibre source on gut morphology, environment and microflora was studied using 18 Mong Cai (MC) and 18 Landrace${\times}$Yorkshire (LY) pigs, aged around 60 d. The diets were based on maize, rice bran, soybean meal, fish meal and soybean oil, and cassava residue (CR) or brewer's grain (BG) as fibrous ingredient sources in the high-fibre diets (HF). A low-fibre diet (LF), containing around 200 g NDF/kg dry matter (DM), was formulated without CR and BG as feed ingredients. The HF diets (HF-CR and HF-BG) were formulated to contain around 270 g NDF/kg DM. The experiment was arranged according to a $2{\times}3$ factorial completely randomized design with six replications, and lasted 30 d. Crypt density in ileum was lowest (p<0.05) and villus height in jejunum and ileum were the greatest (p<0.05) in pigs fed diet HF-BG. Villus width in ileum was greatest in pigs fed diets HF-CR and HF-BG (p<0.05). Lactic acid bacteria (LAB) counts in stomach were greatest (p<0.05) and E. coli counts in ileum and colon were lowest (p<0.05) in pigs fed diet HF-CR. The concentration of total organic acids in ileum, caecum and colon were greatest (p<0.05), and pH in ileum and colon were lowest (p<0.05) in pigs fed diet HF-CR. Crypt density in ileum was lowest, and villus height in ileum and villus width in jejunum and ileum was greatest in LY pigs (p<0.05). LAB counts in stomach and ileum were greatest, and E. coli counts in ileum were lowest in MC pigs (p<0.05). The concentration of total organic acids in ileum, caecum and colon were greatest (p<0.05) and pH lowest (p<0.05) in MC pigs.

• Journal of Korean Society for Atmospheric Environment
• /
• v.25 no.3
• /
• pp.179-187
• /
• 2009

This paper describes the field evaluation of a sampling and analytical method for the quantity of airborne hexavalent chromium ($Cr^{6+}$) in the industrial areas, such as Sihwa and Banwol. Ambient measurements were performed by using the cellulose filter during the four seasons (October 2006 to June 2007). The determination of hexavalent chromium was carried out by ion chromatography. Performance validations, including method detection limit, relative standard deviation, and recovery percent, were also investigated. The mean concentrations of $Cr^{6+}$ in Sihwa and Banwol were 0.767 and 0.796 $ng/m^3$, respectively, which are similar to those of other foreign industrial areas. The seasonal variations of $Cr^{6+}$ levels were not quite different, which implies that the chromium was continuously emitted from the industrial sources throughout the year. The concentration variations between total chromium and $Cr^{6+}$ have also shown the similar pattern, suggesting that these components originate from the same sources. The concentration of $Cr^{6+}$ was found to be 0.7 to 2.4% of the total chromium. From these results, the approach using the cellulose filter may be suitable to collect $Cr^{6+}$ in the ambient air.

• Korean Journal of Community Nutrition
• /
• v.1 no.1
• /
• pp.71-78
• /
• 1996

This study was conducted to compare the dietary factors which influence on the bone status of 28 women in urban and 30 women in rural area. Urinary excretion of hydroxyproline(Hpr) and Calcium(Ca) were measured as biological markers of bone resorption. Mean daily intake levels of total protein, animal protein, total calcium, calcium, calcium from milk and milk products, animal calcium, Ca / P ratio by 24 hr recall method were significantly higher in urban women. However, mean daily sodium(Na) intake levels were not significantly different between two groups. Ca Index score and Na Index score by food frequency methods were also significantly higher in urban than in rural subjects. While urinary Ca excretion elves of two groups were similar, Na excretion levels were significantly higher in rural women. Mean urniary levels of Ca / creatinine(cr) and Hpr / cr as bone status index were within normal range and not significantly different between two groups. However, prevalence of poor bone status as assessed by hydroxyproline was higher in rural women. Na Index, urinary Ca excretion and Ca / cr ratio were significantly correlated with bone status(Hpr / cr) in urban women, while only age was related to bone status in rural women. These demonstrated that high Na intake results in increased urinary excretion of Na and Ca and could cause bone resorption. Multiple regression analysis indicated that Na Index score and age have greater effect than other variables in urban women and only age has greater effect in rural women.

• Journal of Technologic Dentistry
• /
• v.35 no.1
• /
• pp.1-17
• /
• 2013

Purpose: This study was to assess the extents of the release of metals from the non-precious alloys used for dental casting by measuring the differences in the extents of the release of metals by types of alloys, pH level and elapsed time. Methods: Uniform-sized specimens(10 each) were prepared according to the Medical Device Standard of the Korea Food and Drug Administration(2010) and International Standard Organization(ISO22674, 2006), using four types of alloys(one type of Ni-Cr and one type of Co-Cr used for fixed prosthesis, and one type of Ni-Cr and one type of Co-Cr used for removable prosthesis). A total of 12 metal-release tests were performed at one-day, three-day, and two-week intervals, for up to 20 weeks. The metal ions were quantified using an Inductively Coupled Plasma-Atomic Emission Spectrometer. Results: The results showed that the extent of corrosion was higher in the ascending order of Jdium-$100^{(R)}$, Bellabond-$Plus^{(R)}$, Starloy-$C^{(R)}$, and Biosil-$F^{(R)}$. The lower the pH and the longer the elapsed time were, the greater the increase in metal corrosion. At pH 2.4, the release of Ni from Jdium-$100^{(R)}$, a Ni-Cr alloy, was up to 15 times greater than the release of Co from the Co-Cr alloy from two weeks over time, indicating that the Ni-Cr alloy is more susceptible to corrosion than the Co-Cr alloy. Conclusion: It is recommended that Co-Cr alloy, which is highly resistant to corrosion, be used for making dental prosthesis with a non-precious alloy for dental casting, and that non-precious alloy prosthesis be designed in such a way as to minimize the area of its oral exposure. For patients with non-precious alloy prostheses, a test of the presence or absence of periodontal tissue inflammation or allergic reaction around the prosthesis should be performed via regular examination, and education on the good management of the prosthesis is needed.

• Advances in environmental research
• /
• v.6 no.2
• /
• pp.95-111
• /
• 2017

The valorization of swine manure samples, i.e., de-watered cake (SMc) and solid digestate (SMd), in products with beneficial value, i.e., low cost activated carbons (ACs), is studied. For this purpose slow pyrolysis and steam activation at three different duration times are applied. Additionally, the obtained ACs are characterized and tested towards removal of Cr(VI) from aqueous solutions. It is revealed that BET surface area varies in the range of $236-267m^2/g$ for ACs prepared from SMc sample and in the range of $411-432m^2/g$ for ACs prepared from SMd sample. Despite the low determined surface area of prepared ACs, a high total Cr removal capacity is observed occurring through a "coupled adsorption-reduction" mechanism. Higher Cr(VI) removal capacity is demonstrated for ACs having higher surface area ($q_m$ is 140.9 mg/g according Langmuir modelling). Cr(VI) removal is found to be pH dependent with a maximum at pH 1. However at that pH significant amounts of Cr remain in the solution as Cr(III). At pH 2 lower amount of Cr(VI) is removed compensated by a higher removal of Cr(III) resulting in a higher amount of adsorbed $Cr_{tot}$. Therefore adsorption at pH 2 is found to be appropriate. The removal capacity of the studied ACs towards Cr(VI) is almost independent of activation time.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.10
• /
• pp.1482-1486
• /
• 2003

In order to compare effects of feeding systems on rumen fermentation characteristics and nutrient digestion, steers were fed either total mixed ration (TMR) or separate concentrate-roughage ration (CR). Total tract digestibility of nutrients was higher in steers receiving TMR. Especially, DM, ADF and NDF in TMR were digested to a greater extent than those in CR. Rumen pH was not influenced by the feeding systems. Holstein steers on TMR had higher ruminal $NH_3$-N than those on CR. Feeding system did not alter VFA production but TMR feeding resulted in lower A/P ratio. TMR feeding tended to increase the number of bacteria and protozoa in the rumen fluid. Also steers fed TMR generally had higher fiber degrading enzyme activities, which might be the result of increased number of cellulolytic microbes in the rumen of animals on TMR. Our results indicate that TMR may provide more favorable condition for nutrient digestion both in the rumen and in the total tract of steers.

• Journal of Soil and Groundwater Environment
• /
• v.6 no.4
• /
• pp.25-40
• /
• 2001

In order to investigate the degree of heavy metal pollution, 280 urban gully-pot sediments were collected from 13 localities in eastern part of Seoul. The uncontaminated stream sediments were also studied for comparison. A series of studies have carried out concerning the physicochemical characteristics of the sediments and the distribution of Cd, Co, Cr, Cu, Ni, Pb, and Zn. Total metal concentrations of gully-pot sediments and uncontaminated stream sediments were analyzed using acid extraction. After predigestion with $NHO_3$, the sample was digested with mixed acid ($NHO_3$-$HClO_4$). The gully-pot sediments were characterized by very high concentrations of Zn, Cu, Pb and Cr, indicating an anthropogenic contribution of these metals to the sediment chemistry Heavy metal concentrations in the gully-pot sediments were 1-329 times higher than the mean content of metals in the uncontaminated stream sediments, depending on the metals. In particular, the highest mean concentrations of Zn, Cu, Pb and Cr were noticed in the gully-pot sediments from Yeouido, Junggu, Junggu, and Dongdaemungu, respectively. The mean value of total Zn concentration in the business and commercial areas is 2-3.5 times higher than that in industrial areas. This suggests that Zn is mainly derived from automobiles (rubber of automobile tires). The mean concentrations of Cu and Cr are significantly high in the commercial and industrial areas, indicating that industrial activities may cause the accumulation of Cu and Cr in the sediments. The Pb level in gully-pot sediments is comparatively low, due to the use of unleaded gasoline in automobiles since 1987.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.71-77
• /
• 2015

A fluidized biofilter was filled with Pseudomonas sp. and Bacillus cereus/thuringiensis-fixed waste-tire crumb media and was run to treat authentic textile-dyeing wastewater mixed with alkaline polyester-weight-reducing wastewater. As a result, its removal efficiency of $COD_{Cr}$ and color were 75~80% and 67%, respectively. In addition, upon constructing hybrid-recirculating system composed of the fluidized biofilter and a 450 W-UV/photocatalytic reactor, only fluidized biofilter was run bypassing UV/photocatalytic reactor at stage I. Subsequently, the hybrid system was continuously run at stage II-i, ii and iii. At stage II-i, the total removal efficiency of $COD_{Cr}$ was enhanced to be 80~85%, compared to 75% at stage I, owing to 20~30% removal efficiency of the UV/photocatalytic reactor. However, at stage II-i, the total removal efficiency of color was enhanced to be 65~70%, compared to 45~65% at stage I, even though the removal efficiency of the UV/photocatalytic reactor was tantamount to merely 0~5%. As far as the removal efficiency of fluidized biofilter of the hybrid-recirculating system is concerned, its removal efficiency of color was enhanced by the synergy effect of the hybrid-recirculating system unlike $COD_{Cr}$. Besides, despite of the increase of hybrid-recirculating system-recycle ratio, the deactivation of photo-catalytic activity was scarcely observed to eliminate the color while its irreversible deactivation was observed to eliminate $COD_{Cr}$.

• Journal of the Korean Chemical Society
• /
• v.39 no.2
• /
• pp.87-93
• /
• 1995

The amount of Cr(Ⅲ) and Cr(Ⅵ) in a chromium plating solution could be determined simultaneously within five minutes using UV/VIS spectrophotometer coupled with a flow-through analysis(FTA) setup. The λmax's at 580 nm and 440 nm which correspond to Cr(Ⅲ) and Cr(Ⅵ), respectively, well obey the Beer-Lambert law in the range over 0.05 g/L for Cr(Ⅲ) and 0.005 g/L for Cr(Ⅵ). when the pH of the sample is less than 4.0, the absorption extinction coefficients of those peaks are not much dependent on the proton concentration. The amount of Cr(Ⅲ) and Cr(Ⅵ), and the total chromium in post treatment chromium plating solution, which normally has few g/L of Cr concentration, could be easily measured using UV/VIS spectrophotometry after the sample had been diluted with sulfuric acid of pH=1.0 in the flow-through analysis setup; this method is far more convenient and faster than the common redox titration (which requires at least 40 min/sample) method, while the accuracy of the method is highly comparable to conventional titrimetric method. Since the implementation of an PTA-UV/VIS setup in any plating industry is cost effective and easy to operate, the analytic method described in this paper may be applied directly for in situ analysis of plating solutions.