• 대한기계학회논문집A
• /
• 제30권6호
• /
• pp.643-652
• /
• 2006

This paper is concerned with computer simulations of a biped robot walking in static and dynamic gaits. To this end, a three-dimensional robot is considered possessing a torso and two identical legs of a typical design. For such limbs, a set of inverse kinematic solutions is analytically derived between the torso and the feet. Specific walking patterns are off-line generated meeting stability based on the VPCG or ZMP condition. Subsequently, to verify whether the robot can walk as planned in the presence of mass and ground effects, a multi-body dynamics CAE code has been applied to the resulting joint motions determined by inverse kinematics. As a result, the key parameters to successful gaits could be identified including inherent characteristics as well. Upon comparisons between the two types of gaits, dynamic gaits are concluded more desirable for larger humaniods.

• 한국의상디자인학회지
• /
• 제20권2호
• /
• pp.73-87
• /
• 2018

As men in their 30s are spending more money on clothing, it is becoming increasingly important to first conduct an anthropometric study and then develop garment patterns accommodating the changes found in body sizes and types of men in their 30s, in order to effectively address their fit dissatisfaction. Thus this study aims to explore changes in upper body sizes and body types of men in their 30s, which provide basic measurements for designing major garment items including jackets and shirts. To this purpose, key anthropometric dimensions of the upper body of men in their 30s, taken from the 6th (2015) and 7th (2016) surveys conducted by Size Korea, were analyzed using SPSS 24.0 for Windows. Independent sample t-tests were conducted on major upper body sizes to track changes with measuring time. Factor and cluster analyses were used to classify body types. By comparing the two surveys, it was found that the overall body sizes of men in their 30s were increasing in height-related items, circumference, thickness, and width, -as well as body weight and BMIs. Upper body height-related items, in particular, showed a higher average value in the 6th survey than in the 7th, indicating that the overall body types of men are becoming "westernized" with longer legs and shorter torso. Finally, five factors were derived to determine the typical upper body types of men in their 30s and the body types were classified into three categories according to the cluster analysis. First, those with a relatively small build with short stature and torso. Second, those with the highest stature and vertical dimension with the smallest torso volume and least body fatness. Third, those with the biggest torso volume and most body fatness with bigger width between armpits and shoulders. The distributional pattern analysis showed that men in their 30s tend to have increasingly higher stature but lower body weight and BMIs than in the past, implying that their body types are becoming close to those of men in their 20s.

• 복식문화연구
• /
• 제28권3호
• /
• pp.299-312
• /
• 2020

The purpose of this study is to create a shirt sloper suitable for an elderly male body shape by producing virtual models using a 3D-virtualization program, making a torso prototype using the Yuka CAD system, and employing 3D simulation to virtualize and calibrate the model. First, the following three types of obese dummies are implemented through the CLO 3D program: Type 1 exhibits body fat in the lower body; Type 2 exhibits an obese abdomen; and Type 3 displays a balanced form of obesity. Second, for the design of the shirt pattern, the waist back length (measured value+1), back armhole depth (C/10+12+3+0.5~1.5), front armhole depth (back armhole depth 0~1), front interscye (2C/10-1+0.5-0.5), armscye depth (C/10+2+3.5+ 0.5), back interscye (2C/10-1+1), front chest C (C/4+2.5+1), back chest C (C/4+2.5-1), front hem C (C/4+2.5+1(+2)), back hem C (C/4+2.5-1(+2)), cap height (AH/3-5), and biceps width (Front AH-1, Back AH-1) are calculated. Third, the virtual attachment of the shirt pattern is resolved by increasing the front and back armhole depths, and the front and rear wrinkles are improved by adding a back armhole dart. The front hem lift and lateral pull caused by the protrusion of the abdomen are amended by increasing the margin of the chest, waist C, and hip C, with the appearance improved by balanced margin distribution in the front, back, and side panels. The improved retail pattern with an increase in the front armholes C was balanced on the torso plate.

• 한국의류학회지
• /
• 제21권6호
• /
• pp.1031-1040
• /
• 1997

This study was done to analyze the body surface developments of armhole area. The major conclusions of this study are: 1. The body surface developments showed the characteristics of expansion and contraction of body at armhole area. By arm movements, front armhole lines on the body surface developments of upper arm were slow going, but back armhole lines were full and round. As a whole, armhole line of the back torso was swollen outside especially at backarmpit point area, it seemed like a line of raglan sleeve. 2. Regression Analysis was carried out to adapt armhole line on the upper arm and upper body to bodice and sleeve pattern, following the axillary circumference line and chest breadth line changed to the basic pattern form. As the result, armhole lines of 90$^{\circ}$ and 135-180$^{\circ}$ movements deviated from those of standard posture. U-type, clear armhole curve of standard posture turned to V-type, slanting line by arm movements.

• 한국의류학회지
• /
• 제18권1호
• /
• pp.43-56
• /
• 1994

The Purpose of this study was to utilize of CAD System in pattern making process for women's apparel. The automation by the use of CAD System provides the higher accuracy and efficiency in pattern making process. AccuMark 300 System was used. for .this study. The results from this study were as follows . 1. New size spec chart and grading pitch chart were developed based on the data analysis and fitting tests for female college students. 2. New jacket block was developed based on the torso length sloper 3. Automatic grading of jacket block have been developed by creation and modification of grading rules of block pattern. 4. Pattern Design Systyem(P/D/S) were enabled to be constructed directly form a block pattern by modifications to existing styled pattern. 5. Original master pattern was generated by P/D/S menu option. 6. Production pattem added seam allowance, notchs was generated by P/D/S menu option. 7 Interative maker making process have enabled to save a wide range of time and space. 8. Measurement of garment by P/D/S measuring tools is to utilize in garment costing, quality control.

• 한국의상디자인학회지
• /
• 제16권2호
• /
• pp.15-29
• /
• 2014

Setting the ease amount takes the important part to the fit that consumers satisfies. Therefore, it is required to create a pattern for off-the-rack jackets that considers the proper amount of ease. However, few studies have been done previously regarding the ease amount of jacket pattern for the women in their 20s whose demand for jacket is high and who are sensitive to the fit. Therefore, this study selected top five brands in terms of sales and preference among the national female apparel brands. It obtained a tailored jacket pattern for basic size (55 size) and made the jacket. Then, an expert panel group put the pattern on Hani body, a torso dummy for education made by the anthropometric data of Size Korea for females in their 20s and conducted an evaluation on the ease amount and analyzed the results. As a result, the ease amount of the Pattern A was evaluated as proper and that of the Pattern B was found to be lease proper. From the fact, we can see that each of the top 5 off-the-rack brands has different ease amount, though they are of the same basic size (55 size).

• 한국생활과학회지
• /
• 제24권5호
• /
• pp.687-700
• /
• 2015

Lines of non-extension (LoNEs) on torso surface during arm abduction were investigated to provide appropriate location for inserting less-extensible yarns which can be used as seams for design and or clothing pressure variation. As experimental methods, reference points about 3 cm apart were marked on the skin and scanned at 30, $90^{\circ}$ and $135^{\circ}$ arm abduction. Skin deformation was measured by connecting reference points in horizontal, vertical and various angles of diagonal directions. Observation of skin deformation was made within the separated sections of the torso as well as integrated ones to cover the various occasions of design application. LoNEs of front and back torso were provided as mapping lines. Actual compression wear of three types was constructed with different pattern reduction rate at each separated section using LoNEs as boundary cutting lines. Clothing pressure and subjective evaluations of those three compression wear were evaluated by six subjects. LoNEs found in this study were useful as seam lines to differentiate clothing pressure at each part of the body, providing positive wear sensation. It is also expected that LoNEs can be paths for less strechable conductive yarns of IT-integrated upper garments.

• 핵의학기술
• /
• 제18권2호
• /
• pp.28-32
• /
• 2014

심근 관류 SPECT 검사 중 환자의 움직임은 관류 결손과 인공물을 발생시켜 정확한 진단에 영향을 줄 수 있는 인자이다. 움직임으로 왜곡된 데이터를 보정하는 방법으로 움직임 보정방법이 개발되었고 각 방법마다 사용된 알고리즘이 다르기에 상황에 비교하고자 한다. 실험에 사용된 장비는 GE Ventri Gamma Camera와 Anthropomorphic Torso Phantom을 이용하였다. 팬텀을 환자 조건과 동일하게 하기 위하여 심근에 74 kBq/mL, 연부조직 1.1 kBq/mL, 폐 2.6 kBq/mL, 간 9.6 kBq/mL의 Tl-201을 주입하여 제작하고, 움직이는 상황에서 결손의 변화 관찰 목적으로 심근의 Anterior wall에 임의로 결손을 삽입하였다. 움직이지 않는 정상군과 일정간격(2 cm, 3 pixel) 상하 1회 이동, 상하 반복 이동, 좌우 1회 이동, 좌우 반복 이동한 데이터에 나누어 영상 획득하고 MDC, Hopkins, Stasis 방법을 적용하여 Polar map과 정량분석 Score로 비교 하였다. 환자와 동일한 조건으로 회전각 $6^{\circ}$, 50sec/frame으로 영상 획득하고, OSEM (2 iterations, 10 subsets), Butterworth filter (order 10; cutoff frequency; 0.32 cycle per pixel)를 적용, scatter correction, 감쇠보정은 적용하지 않았다. 팬텀 실험에서 세 가지 방법들에서 MDC 방법이 Visual 인공물 없이 잘 보정하였으나, 환자의 데이터에 이를 적용 하였을 때, 환자마다 움직임 보정방법 적용 결과들이 일정하지 않았다. 이는, 환자의 움직임이 일정하지 않고, 장기내의 동위원소의 비율도 다르기에 발생한다고 생각되며 추가적인 연구와 상황에 맞는 움직임 보정방법의 유동적인 사용이 필요하다고 사료된다.

• Journal of Trauma and Injury
• /
• 제18권1호
• /
• pp.47-52
• /
• 2005

Background: This study was undertaken to evaluate the clinical pattern of the patients with penetrating torso injury. We retrospectively analyzed the clinical symptoms, mechanism of injury, injury type including injured organ, and ultimate outcome of treatment. Our purpose of the study was to establish guideline of management in penetrating torso injury. Methods: This study consists of an analysis of a consecutive series of 94 patients with penetrating injury of trunk treated at one general hospital during 7year period (from January 1995 to April 2003) who was admitted through in our emergency department. All data were collected from the medical records and entered in a database for analysis on the following: age, sex, mechanism of injury, vital sign at admission, clinical outcome including hospital mortality, length of hospital stay, length of intensive care unit stay, requirement of crystalloid fluid and blood product. Results: Among 94 patients, there were 68 men and 26 women, with ages ranging from 19 to 82 years (average 38.2 years). The most frequent mechanism of injury was violence by others including rob (n=54, 57.4%) followed by suicidal attempt (n=24, 25.5%) and accidental injury (n=16, 17.0%). No injury was inflicted from gun. In 37 patients, systolic blood pressure at admission was under 90mmHg. The time interval from injury to admission, and from admission to operation was 57.8minutes and 4hour 12minutes each. Laparotomy was required in 70 patients, thoracotomy in 5 patients, and 3 patients required thoracotomy and laparotomy. Among 94 patients, an average of 1.7 organs were injured. The small bowel and colon were the organs most commonly wounded followed by liver, mesentery, pleura. Of the 94 patients, 6 died for an overall mortality rate of 6.4%, and two of them were not related with hemorrhage. The average length of hospital stay was 18.1 days, and 40 patients required ICU care. Conclusion: Of the 94 patients who were admitted from penetrating torso injury, no patient was injured from firearm. Overall mortality rate was 6.4%. In our hospital, firearm injury was relative rare.

• 한국생활과학회지
• /
• 제16권4호
• /
• pp.801-811
• /
• 2007

This study attempts to propose a pattern design of snug fitting midi briefs for women. Each briefs made of two kinds of fabric, cotton 40's and cotton 40's spandex, was produced for the research in a different shrinkage rate. The result of wearing test of the briefs-sold-in-the-market (BSM) and the briefs-specially-made-for-this-research (BSMR) were as follows: BSMR showed a higher mark than that of BSM in the sense of close fit on the torso, comfortableness, sense of being tight, satisfaction and beauty. In particular, the back design line of BSM gave a lower satisfaction to test wearers, while that of BSMR gave a more comfortableness to them, making their hip comfortably being wrapped by making smoother the angle of the straight line linking sidelines with clutch part, and making sidelines into curve. In a forward research, further studies about grading and other patterns but midi pattern of briefs would be examined.