• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.546-551
• /
• 1993

A new robust sliding mode controller is formulated for the tip position control of a single-link flexible manipulator with parameter variations. After establishing the plant model characterized by a noncollocated uncertain control system, a sliding surface which guarantees stable sliding mode motion is synthesized in an optimal manner. The surface is then modified to adapt arbitrarily given initial conditions. A discontinuous control law associated with the modified surface is designed by restricting that velocity state variables are not available from direct sensor measurements. Using the proposed control law favorable system responses are accomplished through shortening the reaching phase of state trajectory without increasing maximum control torque as well as undesirable chattering. Furthermore, a low sensitiveness to uncertainties is obtained from inherent salient properties of the proposed control system. Computer simulations are undertaken in order to demonstrate these superior control performance characteristics to be accrued from the proposed methodology.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.108.5-108
• /
• 2002

Recently, the more advanced control technologies are required to deal with the fast and accurate motion in manipulators. For these requirements, many manipulator control methods have been developed such as a computed torque method. This paper proposes a design method, a two-degrees-of-freedom internal model control (TDOF IMC), of the manipulator position control based on combination of the one-degree-of-freedom internal model control (ODOF IMC) system and the disturbance observer. The proposed control scheme is implemented for the position control, which leads the slave manipulator to the desired location by the master arm. The experimental results are presented and discussed through the imp...

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.1046-1051
• /
• 1991

For the conveyor tracking application of a robot manipulator, a new control scheme is presented. The presented scheme is divided into two stages : the upper one is the motion planning stage and the lower one is the motion control stage. In the upper stage, the nominal trajectory which tracks the part moving in a constant velocity, is planned considering the robot arm dynamics. On the other hand, in the lower level, the perturbed trajectory is generated to track the variation in the velocity of conveyor belt via sensory feedback and the perturbed arm dynamics. In both stages, the conveyor tracking problem is formulated as an optimal tracking problem, and the torque constraints of a robot manipulator are taken into account. Simulation results are then presented and discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.884-889
• /
• 1990

In this paper, a new hybrid position control algorithm for the direct drive arm is proposed. The proposed control is composed of discrete feedforward component and continuous feedback component. The discrete component is the nominal torque which approximately compensates the strong nonlinear coupling torques between the links, while the continuous control is a modified version of sliding mode control which is known to have a robust property to the disturbances of system. For the proposed control law, we give sufficient condition which guarantees the bounded tracking error in spite of the modeling errors, and the efficiency of the proposed algorithm is demonstrated by the numerical simulation of a three link manipulator position control with payloads and parameter errors.

• Journal of International Academy of Physical Therapy Research
• /
• v.8 no.2
• /
• pp.1158-1162
• /
• 2017

The purpose of the study was to investigate the strength of sokinetic muscle by the position of a volleyball players. Analysis and comparison of shoulder dynamic stability will be conducted according to rotational movement of the shoulder during spiking and serving amongst the various positions. Fifty professional Korean female volleyball players (age: 20~30), all different positions - attacker (left and right), center, setter, and libero were The concentric peak torque, strength ration of the internal and external rotation of the shoulder girdle for both dominant and non-dominant arms. Firstly, there were significant differences found for the strength ratio between the setter and the other positions in the dominant arm. On a second note, there was a significant decrease in shoulder dynamic stabilization for both the attacker and center in the dominant arm. However, there were no significant differences for the setter or the libero. This study suggests that the isokinetic muscle strengths of the volleyball players are different from each other.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1222-1224
• /
• 1996

The Hong Ik Direct Drive Arm(HIDDA) is a SCARA typed direct drive manipulator with two degrees-of-freedom(DOF) using the direct drive motor of the NSK company. The direct NSK motors are used to give a large torque directly to the link, to reduce the modeling errors from the gears and chains. But, since the nonlinear coupling torques are transferred to the motor shaft without any reduction, we must consider a dynamic control algorithm. In this paper, we designed a robot controller for the HIDDA using a TMS320C31, which has the highest performance among the third DSP chips in the TI company. And we developed the integrated environment software of the robot management system to give the users an easy way of programming, running and simulation of the robot on the PC.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.464-469
• /
• 2001

This work provides the biomechanical evaluations of a manual wheelchair with a bi-directional driving system. The new propulsion strategy can be accomplished by employing a special gear system that converts the oscillatory motion of a handrim into the unidirectional output motion of a wheel. A main feature of the forward. backward propulsion is to supply continuous driving torque without break. Motion. analysis has been performed through 2-dimensional image processing for measuring the kinematic properties of the upper arm and fore arm. Then, the inverse dynamics analysis has been done for obtaining the joint torques, the handrim forces and input/output powers. Results show that the output power by the forward. reverse propulsion is almost twice as much as that by conventional propulsion. Also, the new propulsion is expected to reduce the fatigues and injuries at arm joints by employing more muscle groups for movement. In conclusion, the forward. reverse propulsion can greatly improve the performances of manual wheelchairs by providing better mobility as well as by guaranteeing several advantages from a biomechanical viewpoint. Future development of a manual wheelchair optimized for the bi-directional propulsion will further improve the propulsion performances.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.2
• /
• pp.100-106
• /
• 2013

This paper deals with the design method for a small waterproof 4-axis robot arm. An extensive analysis was performed on the torque applied to the robot joint as a result of the payload, as well as the design of the joint actuator capacity. In addition, a study was undertaken on the design of a waterproof joint actuator that works at depths greater than 10 m and the wiring design for a small waterproof connector to avoid obstructing the robot motion. Finally, a finite element method simulation was carried out to analyze the strength of the designed robot arm link, and its stability was verified through a simulation test.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.7
• /
• pp.745-752
• /
• 2012

The pivot steering of an individual wheel motor drive vehicle is an effective steering maneuver in the narrow road, but it has become a matter of concern that the torque input of each wheel is very difficult to determine. In this study, the independent yaw moment control was proposed for the smooth pivot steering control of an in-wheel drive vehicle. For this control method, the vertical forces of tires were estimated from the trailing arm dynamic model, and the yaw moments of individual wheels were calculated from the vehicle dynamic model. Dynamic simulation results showed that the independent yaw moment control was much more effective on the minimization of the instabilities of pivot steering in comparison with the conventional direct yaw moment control with yaw rate feedback.

• PNF and Movement
• /
• v.16 no.1
• /
• pp.43-50
• /
• 2018

Purpose: This study examined the effects of a shoulder-strengthening exercise on muscle strength of shoulder flexors and extensors of caregivers. Methods: The study consisted of 19 caregivers (2 males and 17 females) employed by Medical Center B. All the participants took part in an 8-week shoulder muscle strengthening exercise, based on previous studies. In the first week, the subjects took part in a stretching exercise enhance the range of motion. In the second week, they participated in an exercise aimed at improving shoulder blade stability. From the third to seventh weeks, a resistance exercise of different intensities was applied in a phased manner. Finally, in the eight week, the subjects took part in plyometric exercise. Peak torque, average power, and total work of shoulder flexors and extensors in both sides were measured before and after the exercise at an angular speed of 120deg/sec using an isokinetic device. Wilcoxon's singed-ranks test was conducted to analyze differences in muscle strength before and after the intervention. Results: After the exercise, there was a significant improvement in peak torque and average power of flexors of the right arm. After the exercise, peak torque, total work, and average power showed a significant improvement in the flexors of the left arm (p<0.05). However, there was no statistically significant difference in extensor muscle strength in either arm after the exercise. Conclusion: Shoulder flexors of caregivers are utilized frequently in the workplace. Implementation of extensor-strengthening exercises, in addition to flexor-strengthening exercises, can contribute to reducing the incidence rate of shoulder injuries among caregivers.