• 한국컴퓨터정보학회논문지
• /
• 제17권5호
• /
• pp.49-57
• /
• 2012

본 논문에서는 P2P스트리밍에서 peer간 연결 정보를 이용하는 방법을 기반으로 topology 최적화를 연구한다. 제안하는 방법은 mesh-network에서 사용된 link와 사용되지 않은 link의 수로 peer의 업로드 용량을 추정하는 방법을 기반으로 한다. 연결된 link의 정보를 사용하는 기존 방법은 peer의 자원 관리 측면에서 메시지 과부하를 줄이는데 효과적이다. 하지만 업로드 대역폭이 고려되지 않는 topology를 구성할 우려가 있다. 또한 서버에 가까운 peer에서 네트워크 오류 발생시 네트워크 전송성능이 저하될 수 있다. 본 논문에서는 기존 방법의 단점을 보완하는 방법을 제안한다. 기존 방법과 제안하는 방법을 시뮬레이션 하고 결과를 비교 분석한다.

• Journal of Communications and Networks
• /
• 제14권3호
• /
• pp.319-335
• /
• 2012

In this study, we design an applicable model enabling internet protocol television (IPTV) service providers to use a virtual network (VN) for IPTV service delivery. The model addresses the guaranteed service delivery, cost effectiveness, flexible control, and scalable network infrastructure limitations of backbone or IP overlay-based content networks. There are two major challenges involved in this research: i) The design of an efficient, cost effective, and reliable virtual network topology (VNT) for IPTV service delivery and the handling of a VN allocation failure by infrastructure providers (InPs) and ii) the proper approach to reduce the cost of VNT recontruction and reallocation caused by VNT allocation failure. Therefore, in this study, we design a more reliable virtual network topology for solving a single virtual node, virtual link, or video server failure. We develop a novel optimization objective and an efficient VN construction algorithm for building the proposed topology. In addition, we address the VN allocation failure problem by proposing VNT decomposition and reconstruction algorithms. Various simulations are conducted to verify the effectiveness of the proposed VNT, as well as that of the associated construction, decomposition, and reconstruction algorithms in terms of reliability and efficiency. The simulation results are compared with the findings of existing works, and an improvement in performance is observed.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1061-1064
• /
• 1998

This paper proposes a new topology-based partition method for reconfigurable FPGA systems whose components nd the number of interconnections are predetermined. Here, the partition problem must also consider nets that pass through components such as FPGAs and routing devices to route 100%. We formulate it as a quadratic boolean programming problem suggest a paritition method for it. Experimental results show 100% routing, and up to 15% improvement in the maximum number of I/O pins.

• 한국소음진동공학회논문집
• /
• 제26권5호
• /
• pp.584-593
• /
• 2016

In this study, an improvement design method for reducing the vibration of fenders equipped in a tractor is proposed through the establishment of a finite element model and the topology optimization. As the original shapes of the parts cannot be altered, an improved design model was derived in which a stiffener was attached to the border of parts. Thus, the first resonance frequency was increased by approximately 16 Hz, which was confirmed to be the frequency interval for avoiding the idle and operating frequency of the engine. Finally the improved design model was applied to confirm the effect of vibration reduction. Therefore, it can be concluded that the improved design model of the tractor fender is effective at reducing vibrations of the tractor fender.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.268-270
• /
• 2011

This study introduces a new topology optimization scheme combing the genetic algorithm (GA) with the on/off sensitivity method for the magnetic actuator core and the armature design. The design process intended to maximize the first eigen-frequency of the armature part and the magnetic actuating force acting on the armature simultaneously. GA based optimal design was carried out to obtain the initial structure and the modified on/off sensitivity method was succeeded to accelerate the design process. Final results show tens of percent improvement in actuating force as well as the first eigen-frequency of the armature.

• Journal of the Korean Data and Information Science Society
• /
• 제16권3호
• /
• pp.683-693
• /
• 2005

This paper presents a new transmembrane Protein topology prediction method which is an attempt to model the topological rules governing the topogenesis of transmembrane proteins. Context-dependent structural regions of the transmembrane protein are used as basic modeling units in order to effectively represent their topogenic roles during transmembrane protein assembly. These modeling units are modeled by means of a tied-state hidden Markov model, which can express the position-specific effect of amino acids during ransmembrane protein assembly. The performance of prediction improves with these modeling approaches. In particular, marked improvement of orientation prediction shows the validity of the proposed modeling. The proposed method is available at http://bioroutine.com/TRAPTOP.

• 정보저장시스템학회논문집
• /
• 제5권2호
• /
• pp.53-57
• /
• 2009

This study is concerned with the design of a camera iris-shutter device for producing force. The camera iris-shutter with yoke should have a smaller size and a bigger magnetic force than the previous model. Since the induced magnetic force operates shutter movement, the magnetic force maximization for a given input current is an important issue. To achieve the goal, new system is designed by the topology optimization method. The design is refined through the design of experiments to find the detail camera iris shutter design satisfying design constraints.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.258-261
• /
• 2001

High Power factor Active Filter converter is used for Inverter Air conditioner power supply to meet IEC standard. In the active filter topology for power factor, extra switch just control the input current indirectly to meet the IEC standard for reducing the cost and size. In this paper, low cost converter was suggested by simulation using extra switch which auxiliary pulse is inserted and quasi resonant soft switching topology control is adapted for panel's inverter air conditioner converter Inserting auxiliary Pulse method to the extra switch has the benefit of reducing THD by low cost input control circuit. And also quasi resonant soft switching topology can reduce switching loss. So both technical is suitable for Panel's Air conditioner.

• 대한기계학회논문집A
• /
• 제30권9호
• /
• pp.1102-1109
• /
• 2006

In this paper, the polarization of piezoelectric materials is considered to improve actuation since the piezoelectric polarization has influences on the performance of the actuator. The topology design of compliant mechanism can be formulated as an optimization problem of material distribution in a fixed design domain and continuous approximation of material distribution (CAMD) method has demonstrated its effectiveness to prevent the numerical instabilities in topology optimization. The optimization problem is formulated to maximize the mean transduction ratio subject to the total volume constraints and solved using a sequential linear programming algorithm. The effect of CAMD and the performance improvement of actuator are confirmed through Moonie actuator and PZT suspension design.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.587-590
• /
• 2019

본 논문은 센서 네트워크의 주요 문제점인 센서 노드의 이탈과 네트워크 변화에 따른 네트워크 수명 감소를 개선하기 위한 논문이다. 기존 Scalable Topology Organization(STO) 기반 지그비 트리 토폴로지 컨트롤 알고리즘은 전력 소모에 대한 방안을 고려하지 않아 네트워크의 수명이 비교적 짧았다. 이에 따라 매 라운드가 지날때마다 부모 노드를 새로 선출하고 네트워크 토폴로지를 새로 구성하는 클러스터 헤더 선출 기법을 도입하여 네트워크의 전체적인 수명을 연장하였다. 이에 대한 성능은 OMNet++ 시뮬레이터를 통해 동일한 실험 환경에서 기존의 STO 알고리즘과 제안하는 클러스터 헤더 선출 기법을 도입했을 때의 결과를 도출하였고 그 결과 네트워크 수명을 약 40% 증가시킬 수 있었으며 배터리 잔량 부분에서도 약 10%의 성능이 개선된 것을 확인 할 수 있었다.