• Journal of Digital Convergence
• /
• v.14 no.11
• /
• pp.325-331
• /
• 2016

The purpose of this study is to analyze the effect of the glass ceiling induction factors on the improvement of the job Commitment on the glass ceiling perception and to analyze the effect of the organizational Commitment on the influence of the local medical institute and private medical institute employees. As a research method, structural equation model analysis was carried out to investigate the influence relationship of each factor. In particular, multiple group analysis was performed to analyze the difference of influence relations between public and private medical personnel, respectively. Result: First, empirical studies on the effect of the glass ceiling inducing factors on job Commitment showed that job Commitment was influenced by stereotype and organizational culture, and the magnitude of the influence was different. Second, the employees of the room medical center were influenced by perceived promotion, job placement, education and training, reward, and job satisfaction. Third, in the hypothesis that job Commitment will be affected by the perception of glass ceiling, only the workers of the private medical center showed significant results. Based on the results of this study, it will be necessary to plan policies to improve the perception of the glass ceiling phenomenon and improve its status in order to improve the personnel and system with which women workers in the medical field can enter more senior management positions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.5
• /
• pp.843-850
• /
• 2016

In this paper, we propose a digital controller design process for the interleaved type of a boost PFC (Power Factor Correction) converter which can disperse the heat of the switching devices due to the interleaved topology. We establish a mathematical model of a boost PFC converter and propose a controller design method based on the root locus. The performance of the designed controller is verified by simulations. The measurement of the input voltage, inductor currents, and the converter output link voltage are needed for the control of the converter system which consists of a power unit and a control unit where a high-performance 32-bit microcontroller is used. The adjustment of A/D conversion timing is also needed to avoid high frequency noise generated when the switches on/off. It is illustrated by the real experiments that the designed control system with the properly adjusted ADC timing satisfies the given performance specifications of the interleaved boost PFC converter in the on-board slow battery charger.

• Journal of the Economic Geographical Society of Korea
• /
• v.11 no.3
• /
• pp.492-507
• /
• 2008

Many classical network analysis methods approach networks in aspatial perspectives. Measuring network reliability and finding critical nodes in particular, the analyses consider only network connection topology ignoring spatial components in the network such as node attributes and edge distances. Using local network autocorrelation measure, this study handles the problem. By quantifying similarity or clustering of individual objects' attributes in space, local autocorrelation measures can indicate significance of individual nodes in a network. As an application, this study analyzed internet backbone networks in the United States using both classical disjoint product method and Getis-Ord local G statistics. In the process, two variables (population size and reliability) were applied as node attributes. The results showed that local network autocorrelation measures could provide local clusters of critical nodes enabling more empirical and realistic analysis particularly when research interests were local network ranges or impacts.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1007-1017
• /
• 2011

It is important to set the new interconnection system under NGN. The traditional interconnection system is based on traffic, but this is not suitable for IP based service. Therefore, it is needed to ensure the universal access to network without trouble about the network topology. This paper prepares the evaluation criteria and evaluates the alternatives. Specifically, we deduce the alternatives and evaluates the alternatives of interconnection settlement system based on the condition of efficient interconnection, the retail price and access charging model, and the previous studies evaluating and examining the various alternatives. Finally, we evaluate each alternatives by the criteria.

• Journal of Power Electronics
• /
• v.13 no.3
• /
• pp.369-380
• /
• 2013

Direct torque control based on space vector modulation (SVM-DTC) protects the DTC transient merits. Furthermore, it creates better quality steady-state performance in a wide speed range. The modified method of DTC using SVM improves the electrical magnitudes of asynchronous machines, such as minimizing the stator current distortions, the stator flux with electromagnetic torque without ripple, the fast response of the rotor speed, and the constant switching frequency. In this paper, the proposed method is based on two new control strategies for direct torque control with space vector modulation. First, fuzzy logic control is used instead of the PI torque and a PI flux controller to minimizing the torque error and to achieve a constant switching frequency. The voltages in the direct and quadratic reference frame ($V_d$, $V_q$) are achieved by fuzzy logic control. In this scheme, the switching capability of the inverter is fully utilized, which improves the system performance. Second, the close loop of stator flux estimation based on the voltage model and a low pass filter is used to counteract the drawbacks in the open loop of the stator flux such as the problems saturation and dc drift. The response of this new control strategy is compared with DTC-SVM. The experimental and simulation results demonstrate that the proposed control topology outperforms the conventional DTC-SVM in terms of system robustness and eliminating the bad outcome of dc-offset.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.538-541
• /
• 2006

Recently researches of P2P media streaming have been actively published, but the research what kind of P2P overlay networks are better to delivering media data has not been attended. This paper designs a P2P streaming media system model. In this system, we constructs a Half-Structure P2P overlay protocol based on node's capability as the infrastructure of streaming application, which utilizes the heterogeneity of the nodes to maintain topology, presents a active contents diffusing algorithm and Two-stage search algorithm, make it possible for nodes in P2P system to collect information according their capacity and reduces the number of forwarding packet compared with flooding. Also, we give an optimal scheme to scheduling media data.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.3
• /
• pp.331-335
• /
• 2010

Previous low-energy time synchronization methods have mainly focused on reducing the number of transmission or reception packets. However, this paper proposes a method that reduces the percentage of time a node has to be awake (the duty cycle), assuming that a periodic sleep-wake cycle is used to conserve energy. Based on our experience with actual WSN devices, a system model is proposed, and the potential performance of the proposed method, with different parameter values, is analyzed. To further demonstrate the feasibility of our method, experiments were conducted using nine WSN devices in a $3{\times}3$ grid network topology. The results show the average synchronization error is 107.57 $\mu{s}$ in duty cycle 5% and synchronization period 10 sec, and 130 $\mu{s}$ in duty cycle 2.5% and synchronization period 20 sec.

• The KIPS Transactions:PartB
• /
• v.14B no.6
• /
• pp.413-422
• /
• 2007

This paper addresses a new technique for constructing surface model from a set of wire-frame contours. The most difficult problem of this technique, called contour triangulation, arises when there are many branches on the surface, and causes lots of ambiguities in surface definition process. In this paper, the branching problem is reduced as the surface reconstruction from a set of virtual belts and virtual canyons. To tile the virtual belts, a divide-and-conquer strategy based tiling technique, called the BPA algorithm, is adopted. The virtual canyons are covered naturally by an iterative convex removal algorithm with addition of a center vertex for each branching surface. Compared with most of the previous works reducing the multiple branching problem into a set of tiling problems between contours, our method can handle the problem more easily by transforming it into more simple topology, the virtual belt and the virtual canyon. Furthermore, the proposed method does not involve any set of complicated criteria, and provides a simple and robust algorithm for surface triangulation. The result shows that our method works well even though there are many complicated branches in the object.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.470-475
• /
• 2019

This paper deals with a 30kW grid-connected PCS (Power Conversion System) for an Oscillating Water Column (OWC) wave-power generation system. Wave power generation in marine energy is suitable for Korea with the characteristics of a peninsula with three sides facing the sea. In the case of coastal disasters, wave generators can act as a breakwater to reduce damage, and can be integrated with other marine power generation systems to increase efficiency. Wave power generation systems are classified into various types, such as oscillating bodies, OWC, and overtopping according to the operation principle, and they can also be classified into two types according to the installation method: a fixed structure and floating structure. This paper proposes a 30kW grid-connected PCS topology and model for OWC wave power generation that is structurally stable with a turbine and generator that are relatively easy to maintain, and then provide a control method required for grid connection, including DC link voltage control. Simulation verification was performed to verify the proposed PCS.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.25-36
• /
• 2021

This paper presents a topology based on packet tracer and a five-step scenario model to make it easier for students to understand the network on which VLANs are applied. Virtual LAN (VLAN), developed as an alternative solution to the Routers that distribute broadcast traffic, is a virtual local area network that logically configured regardless of the physical network. The VLAN prevents the network performance degradation resulting from the broadcast traffic by dividing the broadcast domain so that the bandwidth can be used more efficiently. In addition, it enhances the security because on communication between the devices belonging to different VLANs is impossible. The five-step scenarios in this paper presented an efficient implementation case for students to understand and validate the various functions of VLANs through ping/telnet/tracert test and simulation, after setting up each step of programming switches and routers in the virtual network.