• Journal of Ocean Engineering and Technology
• /
• v.30 no.6
• /
• pp.484-497
• /
• 2016

In order to understand the characteristics of the topography change in front of an impermeable breakwater, a coupled model for a two-way analysis of the existing LES-WASS-2D and newly developed morphodynamic model was suggested. A comparison to existing experimental results revealed that the results computed using the 2-D hydro-morphodynamic model were in good agreement with the experimental results for the wave form, pore water pressure in the seabed, and topographical change in front of a submerged breakwater. It was shown that the two-way model suggested in this study is applicable to a morphological change in the seabed around a submerged breakwater. Then, using the numerical results, the topographical changes in front of an impermeable submerged breakwater were examined in relation to partial standing waves. Moreover, the characteristics of the local scour depths in front of them are also discussed in relation to incident wave conditions, sediment qualities, and submerged breakwater shapes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.48-56
• /
• 2000

This study aims to find out the norms and principles reflected in the spatial organization of royal tombs in the Chosun Dynasty through the modern interpretation of traditional oriental philosophy theory. We examined the characteristics of royal tomb sites including Jeshil(Shrine), Hongjunmun, tomb mound, ponds, and attached buildings employing an analysis of the spatial formation and landscape. This study covered 36 tombs of kings and queens in the Chosun Dynasty. The entire layout of royal tombs, including annexed buildings, was informal in may cases. This was due to following the natural contour rather than adhering to certain philosophical principles. The royal tomb site is divided into three zones. Jeshil and pond constitute a space for living people, visitors. Secondly, the semi-scared space includes the space from Hongjunmun to the entrance to the Chungjaka. The last space is for the dead, from the back of Chungjakak to tomb mound. This is in line with the layout of palaces of the Chosun Dynasty which is characterized by "three gates and three zones": outer yard-court yard- back yard. The size of the space for holding memorial ceremonies, from Hongjunmun to the Chungjakak entrance, was set at 900m until the early Chosun Dynasty. Since that time the distance varied according to the land topography due to the influence of metaphysics. It can be summarized that the spatial organization of royal tombs in the Chosun Dynasty is based on the Confucianism value, the natural contour of the site, and inner spiritual value.ual value.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.3 s.49
• /
• pp.35-45
• /
• 2006

The simulation of tsunami using detailed bathymetry and topography is required to establish the countermeasure of disaster mitigation and the tsunami hazard map. In this study, a simulation of the 1993 tsunami event in the East Sea using parallel finite element model, which is possible to simulate with suitable accuracy by the Beowulf parallel computation method, is performed to produce detailed features of coastal inundation. Results of simulation are compared with measured data. The evolution of statistic distribution of tsunami heights is studied numerically and the distribution functions of tsunami heights show a tendency to the log-normal curve along coastal area.

• Wind and Structures
• /
• v.1 no.4
• /
• pp.303-315
• /
• 1998

Full-scale measurements have been made to determine the increase in wind speed over two exposed embankments, one of $23^{\circ}$ slope and 4.7 m in height, the other of $24^{\circ}$ slope and 7.3 m in height. Measurements were made at heights of 5, 10 and 15 m above the upper edge of each embankment and at the same heights approximately 100 m upwind in the lower-level approach fetch. Despite the modest sizes of the embankments, the maximum recorded increase in mean wind speed was 28% and the minimum was 13%; these increase relate to increases in wind loads on structures erected at the top of the embankments of 64% and 28% respectively. The associated increases in gust speeds are estimated at 33% and 18%, which imply increases in gust loading of 77% and 39% respectively. These experimental results are compared with predictions obtained from a computational fluid dynamics (CFD) analysis, using three high Reynolds number eddy-viscosity models and estimates from the UK wind loading code, BS 6399: Part 2. The CFD results are generally in agreement with the experimental data, although near-ground effects on the embankment crest are poorly reproduced.

• Land and Housing Review
• /
• v.11 no.3
• /
• pp.39-48
• /
• 2020

Gamcheon village was a poor village in the past, but it recently has boomed as a representative tourists' attraction in the region. Its unique topography and history have played a significant role in the town's growth as a famous tourists' attraction. The factors contributed decisively to the formation of a special spatial structure there. In the process of the town's rapid development as a tourists' destination, however, the tourism overflowed. As such, the interests of the residents and the tourists conflicted, and the segregation between the two has augmented. These gaps seem to have enormously distorted the perception of the spaces as much as they have seriously distracted the existing traffic circulations in the village. The purpose of this study is to identify the differences in spatial perception of both residents and tourists in the Gamcheon village. For the purpose, it assumes the residents' natural movements and the tourists' purposeful movements, and they are analyzed by the space syntax. The major findings are that the circulations of the residents and the tourists in the village are clearly separated and that the two groups perceive the same space completely differently. This confirms the fact that even the same space could be recognized and used in a totally different way depending on the users' purposes.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.1
• /
• pp.54-65
• /
• 2003

The results of the research were as follows: The entire space of the village was based on natural formation in its initial formation stage. The traditional location conditions and environment were equipped with the possibility and conditions for the development of the village. Spatial boundaries were mostly divided by natural topography. The quantify of lots diminished in spatial structural factors, while the division of roads by hierarchy in terms of size became explicit. Alleys, as the minimum hierarchial nit, were degraded. The residence unit was focused on economic efficiency. Communal use facilities showed an external relations trend as central facilities. The land, unit residence and communal facilities approached the high hierarchial roads. The communal facilities showed relatively higher independence compared to the residence units. The spatial structural changes followed traditional life style in the initial stage of village formation; however, social elements mainly impacted on the changes. Since reform opening, economic elements were major causes of changes, while construction conditions, life style, and awareness of structures impacted upon the changes. Thus, the economic element is the major change element in the Korean Villages, even though other elements will also become diverse.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.8
• /
• pp.609-615
• /
• 2011

This paper is studied for the improvement of the characteristics of gate oxide with 3-nm-thick gate oxide by deuterium ion implantation methode. Deuterium ions were implanted to account for the topography of the overlaying layers and placing the D peak at the top of gate oxide. A short anneal at forming gas to nitrogen was performed to remove the damage of D-implantation. We simulated the deuterium ion implantation to find the optimum condition by SRIM (stopping and range of ions in matter) tool. We got the optimum condition by the results of simulation. We compare the electrical characteristics of the optimum condition with others terms. We also analyzed the electrical characteristics to change the annealing conditions after deuterium ion implantation. The results of the analysis, the breakdown time of the gate oxide was prolonged in the optimum condition. And a variety of annealing, we realized the dielectric property that annealing is good at longer time. However, the high temperature is bad because of thermal stress.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.311-318
• /
• 1997

On April 27,1993, a forest fire occurred in Morito-area, Manba-city, Gunma-prefecture Japan. Under the prevailing strong winds, the fire spread and extended to the largest scale ever in Gunma-prefecture. The author chartered a helicopter on May 5, one week after the fire was extinguished, and took aerial photos of tile damaged area, and investigated the condition. of the fire through field survey and data collection. The burnt area extended. over about 100 hectares, and the damage amounted to about 190 million yen (about two million dollar). The fire occurred at a steep mountainous area and under strong winds, therefore, md and topography strongly facilitated the spreading, It is the purpose of this paper to report a damage investigation of the fire and to develop the forecasting method of forest fires based on the topographical analysis and spreading speed of fire. In the first place, I analyze the topographical structure of the regions which became the bject of this study with some topographical factors, and construct a land form classification ap. Secondly, I decide the dangerous condition of each region in the land form classification map according to the direction of the wind and spreading speed of f'kre. In the present paper, I try to forecast forest fires in Morito area, and the basic results for the forecasting method of forest fires were obtained with the topographical classification system and spreading speed of fire.

• Geosciences Journal
• /
• v.22 no.6
• /
• pp.903-919
• /
• 2018

This paper focuses on the depositional processes and environmental changes during initial marine flooding recorded in the lower Cambrian succession of the North China Platform in Shandong Province, China. In order to understand imbalance of accommodation and sediment supply in the initial stage of basin-fill, a detailed analysis of sedimentary facies was made for the lowermost siliciclastic deposits of the Liguan Formation. It reveals ten siliciclastic lithofacies in three large-scale outcrops (Jinhe, Anqianzhuang, and Zhangjiapo sections). These facies are grouped into four facies associations, representing siliciclastic foreshoreshoreface (S1), siliciclastic offshore (S2), distributary mouth bars (S3), and coastal plain (S4). The siliciclastic components occur in a linear belt, emanating from a major drainage system in the northeastern part of the platform. Deposition of siliciclastic sediments was largely controlled by regional topography of the unconformable surface and shoreline configuration as well as strong effect of waves and currents. With ensued rise in sea level and decrease in siliciclastic sediment supply, carbonate sediments prevailed, filling the accommodation created by epeirogenic subsidence and sediment loading.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.382-382
• /
• 2015

하천 및 그 주변을 포함한 지형에 대한 정밀 측량 자료의 구축은 장기적인 수자원 계획 및 정책을 수립하는데 중요한 요건이 된다. 최근 들어 무인 항공기의 사진측량시스템을 이용하여 수치 표고모형을 구축하는 연구가 진행 중에 있으며, 이를 기존 하도측량 자료와의 통합 과정을 통해 하천 및 주변지형 측정에 대한 자료 구축이 이루어지고 있다. 본 연구의 목적은 무인 항공기와 무인 하천유량측정용 원격조정보트를 이용하여 측정된 주변 지형 및 하천 지형 자료를 통합하고 이를 공인된 측정 자료와의 비교를 통해 본 연구 결과의 정확성과 이에 따른 측정방법의 효율성을 검토하고자 하였다. 이를 위해 낙동강 강정고령보 하류부 지역을 대상으로 하여 무인 항공기와 무인 하천유량측정용 원격조정보트를 이용하여 지형자료를 측정하였다. 이 측정 자료를 하나의 자료로 통합하여 수치표고모형을 구축하였고 이를 국토지리정보원의 1:5,000 수치지도를 이용하여 5m 간격으로 구축한 수치표고모형과 비교하여 그 정확도를 비교해보았다. 그 결과 측정완료시부터 표준화된 데이터 생성 완료시까지의 시간을 기준으로 기존 측량방법 보다 효율성이 높은 것으로 나타났고, 1:5,000 수치지도를 이용하여 구축한 수치표고모형 자료와 정확도를 비교해볼 때 실무에 적용 가능한 수준 내로 오차가 발생하는 것으로 나타났다.