• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.2
• /
• pp.85-91
• /
• 2005

Nutrients are built up in paddy soils after greenhouse vegetable cultivations with relatively high rates of chemical fertilizers and composts during winter season, and the continuous nutrient accumulation is problematic in crop cultivation. Rice cultivation after greenhouse vegetables is one option for removing the accumulated nutrients in the soils. The object of this experiment was to examine the effect of reduced fertilization to rice on the removal of accumulated soil nutrients and rice yield in greenhouse vegetables and rice cropping system. Experiments were carried out at Changwon and Uiryeong in Gyeongnam province in 2001. The cropping systems were watermelon-rice and pumpkin-watermelon-watermelon-rice in Changwon and Uiryeong, respectively. The soils were Gangseo series (coarse loamy, mixed, nonacid, mesic family of Aquic Fluventic Eutrochrepts) at Changwon and Hampyeong series (fine loamy, mixed, mesic family of Fluvaquentic Dystrochrepts) at Uiryeong. Treatments of conventional fertilization ($N-P_2O_5-K_2O=11-4.5-5.7$, $kg\;10a^{-1}$), no basal fertilization, no top dressing, and no fertilization were included in the experiments. Plant growth and total nitrogen content in the plant were greater as the amount of fertilizer applied were increased. Whereas $SiO_2/T-N$ rate in rice plant and nitrogen use efficiency were greater as the amount of fertilizer applied were reduced. Rice yields were not significantly different among the treatments of conventional, no top-dressed, and no-basal fertilization in Uiryeong, and the rice yields were significantly also not different between the treatments of conventional and no top-dressed in Changwon. The removal of salts in soils after rice cultivation was the highest at the treatment of no-basal fertilization in both of the sites. Therefore, reduced fertilization for rice cultivation after greenhouse vegetables could remove salts accumulated in paddy soils without any significant reducing of rice yield.

• Korean Journal of Soil Science and Fertilizer
• /
• v.13 no.2
• /
• pp.57-63
• /
• 1980

The effect of particle size of silicate fertilizer, crushed slag from the steel industry, on the behavior of silicate in soil was investigated through laboratory experiments. The silicate fertilizer was sieved to obtain three fractions of particles, coarser than 10 mesh 20-35 mesh, and finer than 100 mesh. Silicate concentration of the extract obtained by shaking 20 mg of particles, coarser than 10 mesh, 20-35 mesh, and finer than 100 mesh, in 50 ml of distilled water for 4 hours was 0.3, 1.0, and 3.2 ppm respectively. As shaking the mixture of the silicate fertilizer and soil proceeded, silicate concentration of the extract increased, and this increase after 4 hour shaking was attributed mainly to dissolution of soil silicate. When the mixture of soil and the silicate fertilizer was incubated under submerged condition, silicate concentration of the solution decreased for the first 2-4 weeks, thereafter increased with incubation time. During this incubation period, silicate concentration of the solution changed inversely with pH of the solution. After 6-10 weeks, however, both silicate concentration and pH of the solution increased with incubation time. Silicate concentration of the effluent from the 14.5 cm soil column of which top 4.5 cm was packed with the mixture of 30 g of soil and 30 mg of the silicate fertilizer reached maximum at 0.94 pore volumes for the particles of 20-35 mesh and 1.03 pore volumes for the particles finer than 100 mesh, whereas the effluent concentration reached maximum at 0.88 pore volumes for the soil column without the silicate fertilizer treatment. Soil analysis made after water percolation revealed that 1.5 pore volumes of water could leach down large amount of the water soluble silicate but not the sodium acetate extractable silicate, from top 3-6 cm soil layer.

• KIISE Transactions on Computing Practices
• /
• v.22 no.1
• /
• pp.38-43
• /
• 2016

Recent developments regarding transportation technology have positioned travel as a major leisure activity; however, trip-itinerary planning remains a challenging task for tourists due to the need to select Points of Interest (POI) for visits to unfamiliar cities. Meanwhile, due to the GPS functions on mobile devices such as smartphones and tablet PCs, it is now possible to collect a user's position in real time. Based on these circumstances, our research on an automatic itinerary-planning system to simplify the trip-planning process was conducted briskly. The existing studies that include research on itinerary schedules focus on an identification of the shortest path in consideration of cost and time constraints, or a recommendation of the most-popular travel route in the destination area; therefore, we propose a personalized itinerary-recommendation system for which the stay-time preference of the individual user is considered as part of the personalized service.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.2
• /
• pp.166-172
• /
• 2002

The top shell, Omphalius pfeifferi capenteri meat vacuum-packed in can (diameter$\times$height, 74.1mm$\times$50.7mm) were heated at 115$^{\circ}C$ up to $F_0$ values of 5 min, 10 min, 15 min and 20 min, and the changes in food components were studied. After 14 days storage at 37$^{\circ}C$ and 55$^{\circ}C$, no growth of microorganism and panelling were recognized from the canned meats which were sterlized at 115$^{\circ}C$ with $F_0$ value of S min and over. In the case of proximate composition of the canned meats, the moisture content decreased with the increase of $F_0$ value, while crude protein increased. The increase of volatile basic nitrogen content, pH and degree of browning and the decrease of mineral, total amino acid, free amino acid, trimethylamine oxide, total creatinine contents and yields were observed during thermal processing, In sensory evaluation on color, texture and taste in the canned meats, no significant difference was observed among a boiled sample and the canned meats heated at re value of 10 min and below. But, in the canned meats heated at $F_0$ value of over 15 min, its sensory scores decreased with the increase of $F_0$ value. From these results, the reasonable $F_0$ value for preparation of the heat-treated top shell meats was in the range of 5$\~$10 min.

• Korean Journal of Soil Science and Fertilizer
• /
• v.43 no.1
• /
• pp.25-35
• /
• 2010

The periodic application effects of two different herbicides on soil physical properties were observed in a slightly hilly orchard of pear tree located on the southestern flank of the Palbong Mountain in Gongju Chungnam : (1) bare surface vegetation; (2) glyphosate-treated plot; (3) paraquat-treated plot. The slope of experimental plots ranged from 5.5%to 10.2%at an altitude of 125 mand 896 $m^2$ ($28m{\times}32m$) in area. The total respective rainfall events were 47, 52, 52 times during experimental period from 2006 to 2008, while approximately 65 percent of daily rainfall intensity from2006 to 2008 was less than 20 mm a day. The organic matter contents on the surface 15 cm soil ranging from1.23%to 1.84%in 2006 were changed into from1.35 %to 2.28%in 2008 in the order of control > glyphosate > paraquat > bare plot in 2008, indicating that the herbicide treatment influenced the accumulation organic matter in soil. The changes in soil particle contents showed that the loss of soil particles in top 5 cm soil depth was greater in a bare soil than in other treatments such as control, glyphosate, and paraquat-treated plot. The net changes in the bulk densities showed that there were little variations between May of 2006 and Nov. of 2008 even though there were some losses of the soil particles. The soil strength of the glyphosate-treated bare plots was much greater than those of other plots such as control, glyphosate, and paraquat plots. However the soil strengths in control plots were lower than those in the plots of glyphosate and paraquat treated ones.

• Restorative Dentistry and Endodontics
• /
• v.33 no.2
• /
• pp.148-161
• /
• 2008

The purpose of this study was to evaluate the effect of chlorhexidine (CHX) on microtensile bond strength (${\mu}TBS$) of dentin bonding systems. Dentin collagenolytic and gelatinolytic activities can be suppressed by protease inhibitors, indicating that MMPs (Matrix metalloproteinases) inhibition could be beneficial in the preservation of hybrid layers. Chlorhexidine (CHX) is known as an inhibitor of MMPs activity in vitro. The experiment was proceeded as follows: At first, flat occlusal surfaces were prepared on mid-coronal dentin of extracted third molars. GI (Glass Ionomer) group was treated with dentin conditioner, and then, applied with 2 % CHX. Both SM (Scotchbond Multipurpose) and SB (Single Bond) group were applied with CHX after acid-etched with 37% phosphoric acid. TS (Clearfil Tri-S) group was applied with CHX, and then, with adhesives. Hybrid composite Z-250 and resin-modified glass ionomer Fuji-II LC was built up on experimental dentin surfaces. Half of them were subjected to 10,000 thermocycle, while the others were tested immediately. With the resulting data, statistically two-way ANOVA was performed to assess the ${\mu}TBS$ before and after thermo cycling and the effect of CHX. All statistical tests were carried out at the 95 % level of confidence. The failure mode of the testing samples was observed under a scanning electron microscopy (SEM). Within limited results, the results of this study were as follows; 1. In all experimental groups applied with 2 % chlorhexidine, the microtensile bond strength increased, and thermo cycling decreased the micro tensile bond strength (P > 0.05). 2. Compared to the thermocycling groups without chlorhexidine, those with both thermocycling and chlorhexidine showed higher microtensile bond strength, and there was significant difference especially in GI and TS groups. 3. SEM analysis of failure mode distribution revealed the adhesive failure at hybrid layer in most of the specimen. and the shift of the failure site from bottom to top of the hybrid layer with chlorhexidine groups. 2 % chlorhexidine application after acid-etching proved to preserve the durability of the hybrid layer and microtensile bond strength of dentin bonding systems.

• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.3
• /
• pp.242-247
• /
• 1997

This study was conducted to investigate the combined effects of oyster shell, fly ash and gypsum on rice yield and quality. The four treatments of soil amelioration were oyster shell 4, fly ash 80, fly ash 56 + gypsum 24 and oyster shell 0.8 + fly ash 40 + gypsum 24 ton/ha. Rice yield were in the order of oyster shell, fly ash and control plats. The pH, EC values and OM, Ca, $SO_4$, moisture contents of the top-soil after rice harvesting in soil amelioration treatments were increased, while Mg, Na, Fe, Zn and Al were decreased than those of control. Rice quality was the best in the fly ash plat due to lower T-N and higher Mg/K ratio.

• Journal of Bio-Environment Control
• /
• v.21 no.3
• /
• pp.220-227
• /
• 2012

This study was conducted to analyze the seeding quality of paprika and the growth and early yield after transplanting of paprika nursed under artificial light and natural light. In this study, blue LED, red LED, and white fluorescent lamps (FL) were used as artificial lighting sources. Photoperiod, average photosynthetic photon flux, air temperature, and relative humidity in a closed transplants production system (CTPS) were maintained at 16/8 h, $204{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, 26/$20^{\circ}C$, and 70%, respectively. Leaf length, leaf width, leaf area, top fresh weight and dry weight of paprika seedlings, and chlorophyll content in paprika leaves nursed under LED and fluorescent lamps for 21 days after experiment were significantly affected by light treatments. As compared with the control (white FL), leaf area of paprika grown under blue LED, red LED, and natural light was decreased by 63%, 63%, and 28%, respectively. Top dry weight of paprika grown under blue LED, red LED, and natural light was 64%, 50%, and 22%, respectively, compared with the control. Number of leaves on 18 days after transplanting showed with red LED, blue LED, and natural light by 86%, 84%, and 48%, respectively, compared with the control. On 114 days after transplanting, paprika nursed under blue LED and red LED had relatively short plant height. This result might be caused that the elongation of its internodes was suppressed by the illumination of sole blue or red light. Average number of fruits per plant harvested during 4 weeks after first harvest was 3.5 with red LED, 3.3 with blue LED, 1.0 with natural light, and 2.2 with control, respectively. Early yield of paprika nursed under red LED, blue LED, natural light, and control were 453 g/plant, 403 g/plant, 101 g/plant, and 273 g/plant, respectively. Larger fruit of 136 g was harvested with red LED treatment. Even though the early yield of paprika was greatly increased with artificial lighting, but total yield was almost similar as the harvest period after transplanting in greenhouses was lengthened. From the above results, we could understand that paprika nursed under white FL, blue LED, and red LED showed good growth after transplanting and was early harvested by a week as compared to the natural light. Therefore, the white FL, blue LED, and red LED as the artificial lighting sources in CTPS could be strategically used to enhance the seedling quality, to shorten the harvest time, and to increase the yield of paprika.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.3
• /
• pp.149-155
• /
• 2004

This study was conducted to evaluate the availability of liquid pig manure (LPM) as a substitute for chemical fertilizer (CF) in double cropping system of rice followed by onion. The LPM applied for rice in silty clay loam soil cultivated in the double cropping system with onion contained $3.8g\;N\;kg^{-1}$, $1.8g\;P_2O_5\;kg^{-1}$ and $2.7g\;K_2O\;kg^{-1}$. The LPM applied for onion after rice contained $4.9g\;N\;kg^{-1}$, $1.4g\;P_2O_5\;kg^{-1}$ and $2.1g\;K_2O\;kg^{-1}$. Soil pH increased after rice culture irrespective of treatments. The rice growth and grain yield among CF and LPM applications were not significantly different. The application of LPM without top dressing of CF delayed onion growth at mid and late stage. But when the LPM was applied as basal fertilizer and CF was added for top dressing, onion growth was maintained until late growth stage. The nutrient uptake of LPM and top-dressing by CF (rice)/LPM and top-dressing by CF (onion) were similar to CF (rice)/CF (onion). The highest yield of onion bulb was 58.5 Mg ha-1 at CF (rice)/LPM and top-dressing by CF (onion) treatment, but showed no significant difference with other treatments except CF (rice)/LPM only (onion) and no fertilization (rice)/no fertilization (onion) treatments. In conclusion, in double cropping system of rice followed by onion, rice was capable of being grown by only liquid pig manure but additive chemical fertilizer was needed for optimal onion growth.

• Korean Journal of Materials Research
• /
• v.16 no.12
• /
• pp.766-770
• /
• 2006

The frictional behavior of oxide films on top of the plasma nitrocarburized compound layers was investigated in terms of post-oxidation treatment temperatures. The post-oxidation treatment at both temperatures($400^{\circ}C,\;500^{\circ}C$) produced magnetite($Fe_3O_4$) films which led to a significant enhancement in corrosion resistance. However, this process did not result in any improvement in frictional behavior of the nitrocarburized surface. The wear mechanisms were governed predominantly by the abrasive action of the slider on the surface irrespective of the counterface material(SiC and Bearing steel). When the specimen was sliding against a SiC counterface, the oxide films were destroyed during the early stage of the sliding process and the wear debris of the oxide film at the sliding track had a great influence on the friction coefficient. On the other hand, when sliding against a bearing steel counterface, the slider was mainly worn out due to the much higher hardness of the surface hardened layer. The fluctuation of the friction coefficient of $400^{\circ}C$-oxidized/ nitrocarburized specimen is much severer than that of $500^{\circ}C$ specimen, due to the less amount of wear debris.