• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.333-337
• /
• 1999

The biggest challenge facing today manufacturing industry is better quality and high productivity. From an economic point of view, productivity is the most important parameter, as high productivity will reduce the cost. However, the customers of day are not only cost concerned, but also quality conscious. So high accuracy levels should also be achieved in the manufacturing process. This paper reports the development of a automatic design system based on AutoCAD program. 1'his work is composed of three section that are design of top down menu, impeller and casing for pump programed by AutoLISP language and runned Windows system. The developed system ultimately generates the design for a pump through AutoCAD program. In the design of the pump, it needs about 23 hours with an expert, but this system can be only 80 seconds without an expert.

• Korean Journal of Computational Design and Engineering
• /
• v.13 no.4
• /
• pp.243-254
• /
• 2008

As modular production becoming increasingly widespread in globalized manufacturing industries, sub modules or parts of the final product are being provided by many suppliers. Some part suppliers design their own products for themselves. In some cases, part suppliers provide the same type of product to multiple OEM companies. Because all part suppliers and OEM companies typically cannot use the same CAD system, engineering change in the CAD model of one company cannot be directly propagated to related CAD models of other companies. Even if two companies use the same CAD system, it may be difficult to share their CAD model owing to corporate security policy. In this paper, a neutral reference model that consists of a neutral skeleton model and an external reference data model is proposed as a new medium for the sharing and propagation of engineering change information among collaborating companies.

• Proceedings of the IEEK Conference
• /
• 2000.06b
• /
• pp.221-225
• /
• 2000

We designed asynchronous event logic library with 0.25$\mu\textrm{m}$ CMOS technology and interface chip for heterogeneous system with high-speed asynchronous FIFO operating at 1.6㎓. Optimized asynchronous standard cell layouts and Verilog models are designed for top-down design methodology. A method for mitigating a design bottleneck when it comes to tolerate clock skew is described. This communication scheme using clock control circuits, which is used for the free of synchronization failures, is analyzed and implemented. With clock control circuit and FIFO, high-speed communication between synchronous modules operating at different clock frequencies or with asynchronous modules is performed. The core size of implemented high-speed 32bit-interface chip for heterogeneous system is about 1.1mm ${\times}$ 1.1mm.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.16 no.2
• /
• pp.49-64
• /
• 1991

In this paper, we present a stepwise design methodology for relational databases using a new conceptual data model, the MAO(Multiple Aspects-based Object) model. Our methodology consists two steps : first, data requirements are conceptualized using the MAO model with concepts such as objects types and aspect types : second, the MAO model is transformed into the third normal form inn the relational model supported by commercial DBMs. A top-down approach is used for the MAO modelling in the first, step, and the transformation process in the second step can be automated. Our methodology supports easier and more database design of real world than other methodologies using existing data models.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.3
• /
• pp.89-98
• /
• 2014

Platform-based product family design is recognized as an effective method to satisfy the mass customization which is a current market trend. In order to design platform-based product family successfully, it is the key work to define a good product platform, which is to identify the common modules that will be shared among the product family. In this paper the clustering analysis using dendrogram is proposed to capture the common modules of the platform. The clustering variables regarding both marketing and engineering sides are derived from the view point of top-down product development. A case study of a cordless drill/drive product family is presented to illustrate the feasibility and validity of the overall procedure developed in this research.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.172-179
• /
• 1996

In the paper, QCELP (qualcomm code excited linear predictive), CDMA (code division multiple access)'s vocoder algorithm, was analyzed. And then, a ptich parameter seaarch architecture for 16-bit programmable DSP(digital signal processor) for QCELP was designed. Because we speed up the parameter search through high speed DSP using two MACs, we can satisfy speech codec specifiction for the digital celluar. Also, we implemented in FIFO(first-in first-out) memory using register file to increase the access time of data. This DSP was designed using COMPASS, ASIC design tool, by top-down design methodology. Therefore, it is possible to cope with rapid change at mobile communication market.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.379-382
• /
• 2000

We designed a self-timed interface circuit for efficient communication in IP (Intellectual Property)-based system with high-speed self-timed FIFO and a set of self-timed event logic library with 0.25um CMOS technology. Optimized self-timed standard cell layouts and Verilog models are generated for top-down design methodology. A method for mitigating a design bottleneck when it comes to tolerate clock skew is described. With clock control method and FIFO, we implemented high-speed 32bit-interface chip for self-timed system, which generated maximum system clock is 2.2GHz. The size of the core is about 1.1mm x 1.1mm.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2004.11a
• /
• pp.173-174
• /
• 2004

The Great Wall is an element in University which stand outs as a landmark. The Great Wall is located in front of the grand staircases of the gymnasium in the main gate area. Falling water and Lights shows a spectacle panorama in various point of view. Water falls down the top of the grand staircases and the front walls. And the red, blue and green lights brighten the falling water in the evenings. Also the relief of the palm tree and turtle symbolizes the University Identity. The wall is comprehends not only the day and the night but four seasons. The Water, Lights, and the Relief are coordinates well along with the new building in campus.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.2 s.257
• /
• pp.260-268
• /
• 2007

Demand for the use of 3D CAD DMU systems over the Internet environment has been increased. However, transmission of commercial 3D kernels has delayed the communication effectiveness due to the kernel size. Light weight CAD geometric kernel design methodology is required for rapid transmission in the distributed environment. In this paper, an assembly data structure suitable for the top-down and bottom-up assembly models has been constructed. Part features are stored without a hierarchy so that they are created and saved in no particular order. In particular, this paper proposes a new assembly representation model, called multi-level assembly representation (MAR), for the PDM based assembly DMU system. Since the geometric kernel retains assembly hierarchy and topological information, it is applied to the web-viewer for the PDM based DMU system. Effectiveness of the proposed geometric kernel is confirmed through various case studies.

• Journal of Engineering Education Research
• /
• v.22 no.2
• /
• pp.46-54
• /
• 2019

The purpose of this study is to discuss the current status and limitations of convergence education in universities and to explore new possibilities of engineering convergence education by analyzing characteristics and cases of self - design semesters as convergence education. As a result of this study, it was found that the education for fostering convergence ability is insufficient for the viewpoint of education. The types of convergence education could be classified into three categories. However, the concept and paradigm of convergence education has not been established precisely because it is made in a 'top-down' manner by the government. In addition, there was a limit of the lack of a foundation to operate the convergence education. However, A university's self-design semester, it shows the possibility of cultivating the overall convergence ability by giving autonomy and subjectivity to learners and through the acquisition of contextual knowledge and the ability of collaboration.