• Journal of The Geomorphological Association of Korea
• /
• v.25 no.3
• /
• pp.71-87
• /
• 2018

As part of further study on Gwangseungri coastal deposits which occurred at 10 ~ 15m above sea level and was analyzed as palaeo-coastal flood-type sediments, six burial ages of six additional samples from the two cross sections (KST1 and, KST2) near to the points of the past study were estimated and the geochemical analysis was performed. Further investigation on the cross section KST1 revealed a reversal of the burial age at the bottom of the section which was identified as palaeo-flooding sediments and supposed to have been buried about 350 years ago. At the lower part of the KST1, the burial age of the sediment layer was estimated to be 3,800 years. The lower part of KST2 sediments was identified as sediments that was formed about 6,600 years ago and about 20,000 years ago. Considering the inclination of the sediment layers, the coastal flooding sedimentsreported to have formed 700 years ago in the previousstudy are located at the top and the KST1 section analyzed in thisstudy seemed to be connected to the lower part. The chemical analysis showed that the relationship between these layers was not continuous but had a discontinuous characteristic influenced by a specific event, and the chemical composition also showed a rapid change. If we judge these together, the lowest part of Gwangseungrisediment layerseemed to have formed during the last glacial period but it was hard to find its origins clearly. On top of this layer, a fine sediment layer containing gravels was also formed.Itseemed thatsedimentation did not occur continuously, but was affected by temporary events in such a way that after a sediment layer was formed, it stopped. Since then, a coastal flooding event occurred about 700 years ago, and part of flooded sediments accumulated in the rear slope. After that, when a flood layer including additional granular materials about 350 years ago was formed, sedimentation along the slope seemed to have occurred.

• Journal of the Korean Society of Costume
• /
• v.61 no.10
• /
• pp.55-71
• /
• 2011

Court ladies' tasks were largely divided into two. First, if there is a royal family event, such as the royal family's wedding or feast, they followed the rules and regulations of work division that was defined in "Gyeonggukdaejeon". Secondly, during normal days, they were divided into Jimil (至密), Chimbang (針房), Subang (繡房), Sesugan (洗手間), Saenggwabang (生果房), Naesojubang (內燒廚房), and Oesojubang (外燒廚房) and took charge of female work that was needed daily at the palace including serving, cooking, laundry, needlework, embroidery, cleaning, and nurturing. This organization was operated by different palaces such as the daejeon(king's palace), daebijeon(queen dowager's palace), junggungjeon(queen's palace), or sejagung(prince's palace). Court ladies were selected among female slaves of the government office or naesusa(a ministry of royal household properties). Although commoners were forbidden to be selected, they sometimes became court ladies voluntarily for financial reasons or because of the will of their parents. Court ladies had different appearances according to the division they belonged to. The court girls of Jimil, Chimbang, and Subang wore saeangmeori while court girls from other places had braided hairstyles. At Jimil, they wore all different kinds of chima(skirt) and jeogori(jacket). Usually, court ladies wore navy chima, jade jeogori, green gyeonmagi(top jacket) with the uyeomeori hairstyle. When working in the evening, they wore pink jeogori or yellow-green jeogori, navy chima with the jojimmeori hairstyle for easiness to stay up all night and work. Navy chima was worn by court ladies. If there was a royal family event upper court ladies wore uyeomi, black or green wonsam, and stewards wore garima and dangui.

• KIPS Transactions on Software and Data Engineering
• /
• v.1 no.1
• /
• pp.69-74
• /
• 2012

Many internet users attempt to focus on the issues which have posted on social network services in a very short time. When some social big issue or event occurred, it will affect the number of comments and retweet on that day in twitter. In this paper, we propose the method of extracting core events based on timeline analysis, sentiment feature and retweet information in twitter data. To validate our method, we have compared the methods using only the frequency of words, word frequency with sentiment analysis, using only chi-square method and using sentiment analysis with chi-square method. For justification of the proposed approach, we have evaluated accuracy of correct answers in top 10 results. The proposed method achieved 94.9% performance. The experimental results show that the proposed method is effective for extracting core events in twitter corpus.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.606-608
• /
• 2014

Recent smartphone users constantly increases, an increase in malicious applications smartphones indiscretions exists within the Terminal, through the deployment of privacy disclosure, Singh and other victims also are on the rise. A typical personal way to malicious code masquerading as a normal application and install it on the handset of my text message or a personal note, such as personal information, the certificate directory, is the way that leaked. Therefore, to obtain permission to attack the root Terminal event by collecting malware infections and respond to determine whether it is necessary for the technique. In this paper, check the features of a Smartphone in real time systems, to carry out a study on the application throughout the Terminal to collect my attack event analysis, malware infection can determine whether or not the mobile security monitoring system. This prevents a user's personal information and take advantage of the top and spill are expected to be on the field.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.8
• /
• pp.689-696
• /
• 2001

Large-scale Multi-disciplinary Systems(LMS) such as transportation, aerospace, defense etc. are complex systems in which there are many subsystems, interfaces, functions and demanding performance requirements. Because many contractors participate in the development, it is necessary to apply methods of sharing common objectives and communicating design status effectively among all of the stakeholders. The processes and methods of systems engineering which includes system requirement analysis; functional analysis; architecting; system analysis; interface control; and system specification development provide a success-oriented disciplined approach to the project. This paper shows not only the methodology and the results of model-based systems engineering to Automated Guided Transit(AGT) system as one of LMS systems, but also propose the extension of the model-based tool to help manage a project by linking WBS (Work Breakdown Structure), work organization, and PBS (Product Breakdown Structure). In performing the model-based functional analysis, the focus was on the operation concept of an example rail system at the top-level and the propulsion/braking function, a key function of the modern automated rail system. The model-based behavior analysis approach that applies a discrete-event simulation method facilitates the system functional definition and the test and verification activities. The first application of computer-aided tool, RDD-100, in the railway industry demonstrates the capability to model product design knowledge and decisions concerning key issues such as the rationale for architecting the top-level system. The model-based product design knowledge will be essential in integrating the follow-on life-cycle phase activities. production through operation and support, over the life of the AGT system. Additionally, when a new generation train system is required, the reuse of the model-based database can increase the system design productivity and effectiveness significantly.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.6
• /
• pp.1031-1039
• /
• 2010

The decathlon is an athletic event consisting of ten track and field events. Events are held over two consecutive days and the winners are determined by the combined performance in all. Performance is judged in meters, centimeters, minutes, and seconds. However, how to convert results into points is a difficult and controversial issue. We explored the distribution of decathlon results from the 1991 to 2009 using top 200 decathlons in the Olympic games and word championships. The conclusion is that the results from top level decathlon competition are normally distributed, and the current scoring system does not have the property that the performance with same difficulty should get same points. A new model for evaluating the decathlon score has been applied that display uniform characteristics over all events in order to meet the notion of allroundness. The proposed model is uniform over the events and support self-stabilization.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.161-169
• /
• 2006

A short seismic reflection survey was performed to map the basement and the upper units in the Gomso Bay. This research was mainly aimed at clarifying the basement by improving the signal-to-noise ratio in data processing steps. The strategies employed in this research included enhancement of the signal interfered with large-amplitude noise, through pre- and post-stack processing such as time-variant filtering, bad trace edit, careful muting after f-k filter and NMO correction. The subsurface structure mapped from this survey mainly consists of the top of basement and the upper three units, which were well correlated to the result from the previously conducted MT survey. Furthermore seismic section clarifies approximately 30m deep subhorizontal event of the top of the basement, which was not shown in the central portion of the MT section due to data qualify.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.31-49
• /
• 2005

The purpose of this study was to analyze the weight transfer patterns under the different golf swing types which are full swing control swing and putting stroke. Two women golfers participated in this study, one(165cm, 94.3kg)being classified as a low-handicap(LH)player, the other(165cm, 54.5kg) being classified as a high-handicap(HH) player. Both players are right-handed. Two force plates(Kistler, 9286AA) were synchronized with a motion capture system(Qualisys ProReflex MCU240). Anteriorposterior, mediolateral, and vertical forces were used as an indicator of the pattern of swing. Four discrete positions which are address, top of backswing impact, and finish were identified as an event and three phases which are backswing downswing, and follow-through between he events were also identified. The results showed that, at impact, the total force was 1.24BW ring the full swing 1.17BW during the control stroke, 1.00BW during the putting stroke. Depending on the golf swing types, the differences are existed. At impact, the distribution of forces is different with a low-handicap(LH) player and a high-handicap(HH) player. A LH player has 26% in right foot and 74% in left foot during the full swing 49% in right foot and 51% in left foot during the control swing 49% in right foot and 51% in left foot during the putting stroke. A HH, on the other hand, has 74% in right foot and 26% in left foot during the full swing 62% in right foot and 38% in left foot during the control swing 54% in right foot and 46% in left foot during the putting stroke. From address to top of backswing the amount of vertical forces are changed 43:57(right foot: left foot) to 76:24 during the full swing 47:53(right foot: left foot) to 75:25 during the control swing 50:50(right foot: left foot) to 54:46 during the putting stroke. The biggest weight transfer pattern took place in full swing and the control swing is next, and the putting stroke is the final.

• Journal of the Korean Society for Library and Information Science
• /
• v.53 no.1
• /
• pp.57-81
• /
• 2019

An ontology is a complex structure dictionary that defines the relationship between terms and terms related to specific knowledge in a particular field. There have been attempts to construct various ontologies in Korea and abroad, but there has not been a case in which a large scale crime investigation record is constructed as an ontology and a service is implemented through the ontology. Therefore, this paper describes the process of constructing an ontology based on information extracted from instrusion theft field of unstructured data, a crime investigation document, and implementing an ontology-based search service and a crime spot recommendation service. In order to understand the performance of the search service, we have tested Top-K accuracy measurement, which is one of the accuracy measurement methods for event search, and obtained a maximum accuracy of 93.52% for the experimental data set. In addition, we have obtained a suitable clue field combination for the entire experimental data set, and we can calibrate the field location information in the database with the performance of F1-measure 76.19% Respectively.

• Journal of the Korean earth science society
• /
• v.41 no.3
• /
• pp.222-237
• /
• 2020

A heavy (93 mm hr^-1) rainfall event accompanied by lightning occurred over Gangneung in the Yeongdong region of South Korea on August 6, 2018. This study investigated the underlying mechanism for the heavy rainfall event by using COMS satellite cloud products, surface- and upper-level weather charts, ECMWF reanalysis data, and radiosonde data. The COMS satellite cloud products showed rainfall exceeding 10 mm hr^-1, with the lowest cloud-top temperature of approximately -65℃ and high cloud optical thickness of approximately 20-25. The radiosonde data showed the existence of strong vertical wind shear between the upper and lower cloud layers. Furthermore, a strong inversion in the equivalent potential temperature was observed at a pressure altitude of 700 hPa. In addition, there was a highly developed cloud layer at a height of 13 km, corresponding with the vertical analysis of the ECMWF data. This demonstrated the increased atmospheric instability induced by the vertical differences in equivalent potential temperature in the Yeongdong region. Consequently, cold, dry air was trapped within relatively warm, humid air in the upper atmosphere over the East Sea and adjacent Yeongdong region. This caused unstable atmospheric conditions that led to rapidly developing convective clouds and heavy rainfall over Gangneung.