• Korean Journal of Applied Biomechanics
• /
• v.26 no.1
• /
• pp.71-82
• /
• 2016

Objective: The purpose of this study was to investigate kinematic comparisons of Tsukahara vault in gymnastics between a top-level athlete and sublevel collegiate athletes in order to obtain information on key biomechanical points for successful Tsukahara vaults. Methods: An Olympic gold medalist (height, 160 cm; weight, 52 kg; age, 25 years) and five sublevel collegiate gymnasts (height, $168.2{\pm}3.4cm$; weight, $59.6{\pm}3.1kg$; age, $23.2{\pm}1.6years$) participated in this study. They repeatedly performed Tsukahara vaults including one somersault. Fourteen motion-capturing cameras were used to collect the trajectories of 26 body markers during Tsukahara vaults. Event time, displacement and velocity of the center of mass, joint angles, the distance between the two hands on the horse, and averaged horizontal and vertical impact forces were calculated and compared. Results: The top-level athlete showed a larger range of motion (ROM) of the hip and knee joints compared to sublevel collegiate athletes during board contact. During horse contact, the top-level athlete had a narrow distance between the two hands with extended elbows and shoulders in order to produce a strong blocking force from the horse with a shorter contact time. At the moment of horse take-off, reactive hip extension of the top-level athlete enhanced propulsive take-off velocity and hip posture during post-flight phase. Conclusion: Even though a high velocity of the center of mass is important, the posture and interactive action during horse contact is crucial to post-flight performance and the advanced performance of Tsukahara vaults.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.273-282
• /
• 2023

Probabilistic safety assessment (PSA) has been widely used to evaluate the seismic risk of nuclear power plants (NPPs). However, studies on seismic PSA for process plants, such as gas plants, oil refineries, and chemical plants, have been scarce. This is because the major disasters to which these process plants are vulnerable include explosions, fires, and release (or dispersion) of toxic chemicals. However, seismic PSA is essential for the plants located in regions with significant earthquake risks. Seismic PSA entails probabilistic seismic hazard analysis (PSHA), event tree analysis (ETA), fault tree analysis (FTA), and fragility analysis for the structures and essential equipment items. Among those analyses, ETA can depict the accident sequence for core damage, which is the worst disaster and top event concerning NPPs. However, there is no general top event with regard to process plants. Therefore, PSA cannot be directly applied to process plants. Moreover, there is a paucity of studies on developing fragility curves for various equipment. This paper introduces PSA for gas plants based on FTA, which is then transformed into Bayesian network, that is, a probabilistic graph model that can aid risk-informed decision-making. Finally, the proposed method is applied to a gas plant, and several decision-making cases are demonstrated.

• Fire Science and Engineering
• /
• v.17 no.1
• /
• pp.8-20
• /
• 2003

Natural gas has been supplied through underground pipelines and valve stations as a new city gas in Seoul. In contrast to its handiness the natural gas has very substantial hazards due to fires and explosions occurring from careless treatments or malfunctions of the transporting system. The main objectives of this study are to identify major hazards and to perform risk assessments after assessing reliabilities of the composing units in dealing with typical pipeline networks. there-fore two method, fault tree analysis ;1nd event tree analysis, are used here. Random valve stations are selected and considered its situation in location. The value of small leakage, large rupture, and no supply of liquefied natural gas is estimated as that of top event. By this calculation the values of small leakage are 3.29 in I)C valve station, 1.41 in DS valve station, those of large rup-lure are $1.90Times10_{-2}$ in DC valve station, $2.32$\times$10^{-2}$ in DS valve station, and those of no supply of LNG to civil gas company are $2.33$\times$10 ^{-2}$ , $2.89$\times$10^{-2}$ in each valve station. And through minimal cut set we can find the parts that is important and should be more important in overall system. In DC valve station one line must be added between basic event 26,27 because the potential hazard of these parts is the highest value. If it is added the failure rate of no supply of LNG is reduced to one fourth. In DS valve station the failure rate of basic event 4 is 92eye of no supply of LNG. Therefore if the portion of this part is reduced (one line added) the total failure rate can be decreased to one tenth. This analytical study on the risk assessment is very useful to prepare emergency actions or procedures in case of gas accidents around underground pipeline networks and to establish a resolute gas safety management system for loss prevention in Seoul metropolitan area.

• Spatial Information Research
• /
• v.22 no.3
• /
• pp.1-8
• /
• 2014

While SNS services such as Twitter or Facebook are rapidly growing, research for the SNS analysis has been concerned. Especially, twitter reacts to social issues in real-time so that it is used to get useful experimental data for researchers of social science or information retrieval. However, it is still lack of research on the methodology to collect data. Therefore, this paper suggests the tweet acquisition system by considering tendency of twitter user oriented location-based event and political social event. First the system acquires tweets including information of location and keyword about event and secure IDs for acquisition of political social event. Then we plan ID-analyzer to classify the tendency of users. In addition for measuring reliability of ID-analyzer, it acquires and analyzes the tweet by using high-ranked ID. In analyses result, top-ranked ID shows 88.8% reliability, 2nd-ranked ID shows 76.05% and ID-analyzer shows 77.5%, it shortens collection time by using minority ID.

• Nuclear Engineering and Technology
• /
• v.24 no.1
• /
• pp.14-29
• /
• 1992

COMCAF, a computer code for the common-cause failure analysis, is developed to treat the common-cause failures in nuclear power plants. In the treatment of common-cause failures, the minimal cut sets of the system are obtained first without changing the fault-tree structure. The occurrence probabilities of the minimal cut sets are then calculated accounting for the common-cause failures among components in the same minimal cut set or in different minimal cut sets. The basic parameter model is used to model the common-cause failures between similar or identical components. For dissimilar components, the assumption of symmetry used in the basic parameter model is applied to the basic events affecting two or more components. The top event probability is evaluated using the inclusion-exclusion method. In addition to the common-cause failures of components in the same minimal cut sets, failures of components in the different minimal cut sets are also easily accounted for by this method. This study applied this common-cause failure analysis to the PWR auxiliary feedwater system. The results in the top event probability for the system are compared with those of no common-cause failures.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.12-19
• /
• 2021

This paper presents a safety assessment method for FTA-based induction heating systems; the failures and causes of electrical fire are first analyzed for each part and module qualitatively, and methods to manage high probabilities of failure and electrical fire are considered, thereby improving the reliability of the induction heating system. The cumulative importance value (ACC) of the minimal cut set is drawn by setting failure as the top event, and STACK and SMPS are observed to account for about 70% of the induction heating system failures. Thus, intensively managing the basic events contained in the minimal cut set of failures for STACK and SMPS is expected to provide effective and stable operation of the induction heating system. When electrical fire is set as the top event, the STACK percentage is 90%. Accordingly, the current IGBT is changed to a FET to increase the applied voltage and prevent induction heating system failure, and a heat sink plane is installed to prevent FET heating caused by switching, thereby preventing an electrical fire. By classifying the parts and modules of the induction heating system in detail and by applying FTA based on actual failure rates and relevant data, more practical and reasonable results may be expected. Hence, continuous research must be conducted to ensure safety when using induction heating systems.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.1
• /
• pp.159-166
• /
• 2009

The purpose of this study was to develop and automatic gait event detection algorithm using single accelerometer which is attached at the top of the shoe. The sinal vector magnitude and anterior-posterior(x-axis) directional component of accelerometer were used to detect heel strike(HS) and toe off(TO), respectively. To evaluate proposed algorithm, gait event timing was compared with that by force plate and kinematic data. In experiment, 7 subjects performed 10 trials level walking with 3 different walking conditions such as fast, preferred & slow walking. An accelerometer, force plate and 3D motion capture system were used during experiment. Gait event by force plate was used as reference timing. Results showed that gait event by accelerometer is similar to that by force plate. The distribution of differences were spread about $22.33{\pm}17.45m$ for HS and $26.82{\pm}14.78m$ for To and most error was existed consistently prior to 20ms. The difference between gait event by kinematic data and developed algorithm was small. Thus it can be concluded that developed algorithm can be used during outdoor walking experiment. Further study is necessary to extract gait spatial variables by removing gravity factor.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.2
• /
• pp.9-17
• /
• 2017

Rural development policy has changed from hardware based development to community revitalization. The purpose of this study is to analyze social network of collaborative activity among rural organizations as fundamental of community. The material used in this study is a record of collaborative activites in the community newsletter of Hong-Dong area. 161 of collaborative activities (links) and 75 of organizations (nodes) are investigated in network. 6 collaborative activity type ('Education', 'Socializing', 'Meeting', 'Culture', 'Event' and 'Labor') is classified. 'Socializing' is inclusive of approximately half of whole network (50.67%). Closeness centraization, degree centralization and betweenness centralization are measured on top in 'Education', 'Meeting' and 'Event' type. Scatter plot analysis using degree and betweenness centrality index, 'Maeul Revitalization Center', 'Balmak Library', 'Woori-Maeul Medical Co-op', 'Support Center for Female Farmers', 'Hongdong Middle School' and 'Mundang Sustainable Agriculture Education Center' are resulted as the core organization in network. Geographical distribution of collaborative activity is not only concentated in Hong-Dong Myeon but also networked with adjacent administrative district. This study finds its purpose in the detailed analysis of network characteristics of collaborative activity within Hong-Dong area which is representative developed rural community in Korea.

• Journal of the Korean Society of Safety
• /
• v.27 no.3
• /
• pp.111-116
• /
• 2012

This study is about the quantitative safety assessment of hydrogen station in Korea operating with on-site type. This was written by background information that before qualitative safety assessment to write. For the qualitative safety assessment method, the study used FMEA(failure mode & effect analysis) and HAZOP(hazard & operability), and adopted the FTA(fault tree analysis) as the quantitative safety assessment method. To write the FTA, we wrote FT by Top event that hydrogen leakage can be called most serious accident of hydrogen station. Each base event collect reliability data by reliability data handbook, THERP-HRA and estimation of the engineering. Assessment looked at the high frequency and the possible risk through Gate, Importance, m.cutsets analysis.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.1
• /
• pp.50-62
• /
• 1994

The majority of database users interact with database systems by manipulating forms. This paper discusses the fundamentals underlying forms and considers low these mechanisms affect the behavior of forms We then review the forms supported by commercial products. None of the packages reviewed provide all of the features that make up an ideal form. We propose a new design that overcomes many of the limitations observed in the packages currently available. The new system is event- driven, object-oriented, supports a hierachy of composite blocks, and is primarily modeless. Forms are defined as top-level blocks and blocks can be either atomic or composite structures with methods directly included in their definition. Messages are passed among form objects. Defining forms with the proposed system is simple because from definitions are similar to type declarations in Pascal.