• 제목/요약/키워드: Top Event

검색결과 173건 처리시간 0.026초

Kinematic Comparisons of the Tsukahara Vault between a Top-level Athlete and Sublevel Collegiate Athletes

  • Park, Cheol-Hee;Kim, Young-Kwan;Back, Chang-Yei
    • 한국운동역학회지
    • /
    • 제26권1호
    • /
    • pp.71-82
    • /
    • 2016
  • Objective: The purpose of this study was to investigate kinematic comparisons of Tsukahara vault in gymnastics between a top-level athlete and sublevel collegiate athletes in order to obtain information on key biomechanical points for successful Tsukahara vaults. Methods: An Olympic gold medalist (height, 160 cm; weight, 52 kg; age, 25 years) and five sublevel collegiate gymnasts (height, $168.2{\pm}3.4cm$; weight, $59.6{\pm}3.1kg$; age, $23.2{\pm}1.6years$) participated in this study. They repeatedly performed Tsukahara vaults including one somersault. Fourteen motion-capturing cameras were used to collect the trajectories of 26 body markers during Tsukahara vaults. Event time, displacement and velocity of the center of mass, joint angles, the distance between the two hands on the horse, and averaged horizontal and vertical impact forces were calculated and compared. Results: The top-level athlete showed a larger range of motion (ROM) of the hip and knee joints compared to sublevel collegiate athletes during board contact. During horse contact, the top-level athlete had a narrow distance between the two hands with extended elbows and shoulders in order to produce a strong blocking force from the horse with a shorter contact time. At the moment of horse take-off, reactive hip extension of the top-level athlete enhanced propulsive take-off velocity and hip posture during post-flight phase. Conclusion: Even though a high velocity of the center of mass is important, the posture and interactive action during horse contact is crucial to post-flight performance and the advanced performance of Tsukahara vaults.

고장수목 기반 베이지안 네트워크를 이용한 가스 플랜트 시스템의 확률론적 안전성 평가 (Probabilistic Safety Assessment of Gas Plant Using Fault Tree-based Bayesian Network)

  • 이세혁;문창욱;박상기;조정래;송준호
    • 한국전산구조공학회논문집
    • /
    • 제36권4호
    • /
    • pp.273-282
    • /
    • 2023
  • 원자력발전소 지진 확률론적 안전성 평가인 PSA(Probabilistic Safety Assessment)는 오랜 기간에 걸쳐 확고히 구축되어 왔다. 반면에 다양한 공정 기반의 산업시설물의 경우 화재, 폭발, 확산(유출) 재난에 대해 주로 연구되어 왔으며, 지진에 대해서는 상대적으로 연구가 미미하였다. 하지만, 플랜트 설계 당시와 달리 해당 부지가 지진 영향권에 들어갈 경우 지진 PSA 수행은 필수적이다. 지진 PSA를 수행하기 위해서는 확률론적 지진 재해도 해석(Probabilistic Seismic Hazard Analysis), 사건수목 해석(Event Tree Analysis), 고장수목 해석(Fault Tree Analysis), 취약도 곡선 등을 필요로 한다. 원자력 발전소의 경우 노심 손상 방지라는 최우선 목표에 따라 많은 사고 시나리오 분석을 통해 사건수목이 구축되었지만, 산업시설물의 경우 공정의 다양성과 최우선 손상 방지 핵심설비의 부재로 인해 일반적인 사건수목 구축이 어렵다. 따라서, 본 연구에서는 산업시설물 지진 PSA를 수행하기 위해 고장수목을 바탕으로 확률론적 시각도구인 베이지안 네트워크(Bayesian Network, BN)로 변환하여 리스크를 평가하는 방법을 제안한다. 제안된 방법을 이용하여 임의로 생성된 가스플랜트 Plot Plan에 대해 최종 BN을 구축하고, 다양한 사건 경우에 대한 효용성있는 의사결정과정을 보임으로써 그 우수성을 확인하였다.

천연가스 공급설비에 대한 기기신뢰도 분석 및 위험성 평가 (A Study on the Reliability Analysis and Risk Assessment of Liquefied Natural Gas Supply Utilities)

  • 고재선;김효
    • 한국화재소방학회논문지
    • /
    • 제17권1호
    • /
    • pp.8-20
    • /
    • 2003
  • 천연가스는 서울에서 새로운 도시가스로서 지하배관망루 벨브스테이션을 통하여 공급되어 왔다. 그러나 천연가스는 편리함과는 대조적으로 운송시스템의 오류 또는 부주위한 취급으로부터 화재 및 폭발을 야기할 수 있는 매우 실제적인 잠재위험성을 가지고 있다. 따라서 이 연구의 주요 목적은 전형적인 배관망을 구성하는 공급설비의 신뢰성을 평가한 후 주요 잠재위험성의 확인 및 위험성평가를 수행하는 것이다. 본 연구에서는 Fault Tree Analysis와 Event free Analysis에 의해 서울의 임의의 지점 두 곳을 설정하여 최종적인 단계(top event)로서 밸브기지의 소규모 누출과 대규모 누출, 각 도시가스회사로의 천연가스공급중단을 설정하여 각각에 대한 발생빈도의 값을 알아보았다. 그 결과 소규모 누출시 DC, DS 밸브기지에 대하여 각각 3.29, 1.41의 값으로 나타났으며, 대규모 누출에 대하여는 1.90$\times$$10^{-2}$, 2.32$\times$$10^{-2}$, 또한 도시가스회사로의 천연가스공급중단에 대한 각각의 기지에 대한 수치는 2.33$\times$$10^{-2}$, 2.89$\times$$10^{-2}$로 나타났다. 또한 단위 지역 공급설비에 대한 전체적인 신뢰도와 기기별 신뢰도의 계산함으로서 기기와 공급망간의 상호관계성의 인식과, 전체 설비 굽에서 중요한 부분과 좀더 강조되어야 할 부분을 찾아내기 위해 Minimal Cut Set 방법을 사용한 결과, DC 밸브기지의 경우, 기기단위별로는 6, 7, 26, 27 등이 취약함을 보여주고 있으며, 또한 basic event 26, 27의 조합으로 인한 천연가스공급중단의 위험이 가장 크므로 이 부분에 대해서 하나의 라인이 병렬로 추가되어야만 좀더 안정적이고 위험부담이 적은 시스템으로 운영할 수 있다. 이러한 경우 공급중단의 고장율이 1/4로 줄어드는 효과를 가지게 된다. DS 밸브기지의 경우, basic event 4가 천연가스공급중단의 원인의 92%를 차지하고 있다. 그러므로 이 부분의 portion을 낮춰준다면 전체의 고장율도 낮춰질 수가 있고 이 부분에 같은 종류의 라인을 추가로 설치하면 고장율이 약 1/10로 줄어드는 효과를 보게 된다. 또한 기기단위별로는 6, 7, 26, 27 등이 가장 취약한 것으로 나타났다. 이 부분에 대해서는 안전장치나 설비를 추가로 갖추거나, 혹은 점검기간의 주기를 줄이도록 하는 것이 필요하다. 향후 본 연구에서 다루어진 신뢰도 측정방법을 각 공급설비에 대해 적용한다면 좀 더 효율적으로 공급설비의 신뢰도를 계산, 분석할 수 있고, 천연가스공급설비의 안전성 향상에 도움이 될 것으로 기대된다.

트위터 사용자의 위치정보와 성향을 고려한 트윗 수집 시스템 (Tweet Acquisition System by Considering Location Information and Tendency of Twitter User)

  • 최우성;임준엽;황병연
    • Spatial Information Research
    • /
    • 제22권3호
    • /
    • pp.1-8
    • /
    • 2014
  • 최근 소셜 네트워크 서비스가 급격히 성장하면서, 소셜 네트워크 분석에 관련된 연구들도 많은 관심을 받고 있다. 특히 트위터는 사회적 이슈나 사건들에 대해 실시간으로 반응하기 때문에, 사회과학 분야나 정보검색 분야의 연구자들이 유용한 실험 데이터를 수집하는 데에 활용되고 있다. 그러나 정작 데이터를 수집하는 방법론에 관한 연구는 아직 미흡하다. 이에 본 논문에서는 위치 기반의 이벤트와 정치 사회적 이벤트 위주의 사용자의 성향을 고려한 트윗 수집 시스템을 제안한다. 우선 위치정보와 이벤트 관련 키워드를 포함하고 있는 트윗과 정치 사회적인 이벤트 검출에 필요한 ID들을 수집한 후, 사용자들의 성향을 분류할 ID 분석기를 설계했다. 또한 ID 분석기의 신뢰도 측정을 위해 상위 등급에 분류된 ID를 이용하여 트윗을 분석했다. 분석결과 1등급으로 분류된 ID는 88.8%의 신뢰도를 보였으며, 2등급으로 분류된 ID는 76.05%의 신뢰도를 보였다. 또한 ID 분석기는 77.5%의 신뢰도를 보였으며 소수의 ID를 사용함으로써 데이터의 수집시간을 줄였다.

공통원인 고장분석을 위한 전산 코드 개발 (Development of a Computer Code for Common Cause Failure Analysis)

  • Park, Byung-Hyun;Cho, Nam-Zin
    • Nuclear Engineering and Technology
    • /
    • 제24권1호
    • /
    • pp.14-29
    • /
    • 1992
  • 원자력 발전소에서 발생하는 공통원인 고장을 분석하기 위한 컴퓨터 코드 COMCAF를 개발하였다. 공통원인 고장을 다룰 때, 먼저 계통의 최소 단절집합들을 공통원인 기본사상들이 고려되지 않은 고장수목으로부터 구한다. 그리고, 공통원인 고장들이 같은 최소 단절집합내의 부품들간에 있는지 또는 서로 다른 최소 단절집합들의 부품들간에 있는지를 고려하여 이들 최소 단절집합들의 발생 확률값을 계산한다. 유사하거나 동일한 부품들간에 공통원인 고장이 있을때는 Basic Para-meter 모델을 사용한다. 그러나, 서로 다른 부품들간에 공통원인 고장이 있을때는 Basic Para-meter모델에 쓰인 Symmetry Assumption을 두개 이상의 부품에 영향을 주는 기본사상들에만 적용한다. Inclusion-Exclusion방법을 사용하여 정점사상확률간을 구한다. 이 경우 같은 최소 단절 집합들에 있는 부품들의 공통원인 고장뿐만아니라 서로 다른 최소 단절집합들에 있는 부품들의 공통원인 고장도 쉽게 고려될 수 있다. 본 연구에서는 이러한 공통원인 고장분석을 가압경수로의 보조 급수계통에 적용하였다. 이들 정점사상의 확률값들을 공통원인 고장이 없는 경우와 비교하였다.

  • PDF

FTA를 이용한 볼트 유도가열시스템의 고장 및 전기화재 분석 (Analysis of Failure and Electrical Fire for Bolt Induction Heating System Using FTA)

  • 김두현;김성철;엄한얼;강문수;정천기
    • 한국안전학회지
    • /
    • 제36권4호
    • /
    • pp.12-19
    • /
    • 2021
  • This paper presents a safety assessment method for FTA-based induction heating systems; the failures and causes of electrical fire are first analyzed for each part and module qualitatively, and methods to manage high probabilities of failure and electrical fire are considered, thereby improving the reliability of the induction heating system. The cumulative importance value (ACC) of the minimal cut set is drawn by setting failure as the top event, and STACK and SMPS are observed to account for about 70% of the induction heating system failures. Thus, intensively managing the basic events contained in the minimal cut set of failures for STACK and SMPS is expected to provide effective and stable operation of the induction heating system. When electrical fire is set as the top event, the STACK percentage is 90%. Accordingly, the current IGBT is changed to a FET to increase the applied voltage and prevent induction heating system failure, and a heat sink plane is installed to prevent FET heating caused by switching, thereby preventing an electrical fire. By classifying the parts and modules of the induction heating system in detail and by applying FTA based on actual failure rates and relevant data, more practical and reasonable results may be expected. Hence, continuous research must be conducted to ensure safety when using induction heating systems.

가속도계를 이용한 보행 시점 검출 알고리즘 개발 (Development of Gait Event Detection Algorithm using an Accelerometer)

  • 최진승;강동원;문경률;방윤환;탁계래
    • 한국운동역학회지
    • /
    • 제19권1호
    • /
    • pp.159-166
    • /
    • 2009
  • 본 연구의 목적은 실외 보행 실험 시 사용하기에 간편한 가속도계를 이용하여 보행 이벤트를 자동으로 검출하는 알고리즘을 개발하고 검증하는 것이다. 개발된 알고리즘은 신발의 발등에 부착된 3축 가속도계의 가속도의 총합과 보행 진행 방향(x축) 가속도를 이용하였다. 가속도 총합은 착지 시점의 검출에, x축 가속도는 이지 시점의 검출에 각각 사용되었다. 7명의 피험자가 느린 보행 속도 선호 보행 속도 빠른 보행 속도로 보행 실험을 수행하였고, 개발된 알고리즘의 검증을 위해 지면반력기를 포함한 3차원동작분석시스템과 동시에 실시되었다. 지면반력기를 이용한 보행 시점을 기준으로, 기존에 발표된 동작 자료만을 이용한 알고리즘을 통하여 얻어진 보행 시점도 함께 비교 하였다. 그 결과, 고안된 알고리즘의 정확도는 지면반력기를 이용한 값에 평균, 착지시점은 $22.33{\pm}17.45ms$, 이지시점은 $26.82{\pm}14.78ms$의 차이가 났고, 그 오차의 패턴이 일관적으로 20ms가량 먼저 검출되는 경향이 있었다. 일반적으로 트레드밀 실험에서 많이 사용되는 동작데이터를 통한 보행 시점의 비교에서도 크게 차이를 보이지 않았다. 그러므로 개발된 알고리즘은 실외 실험의 보행 시점 검출에 이용할 수 있을 것으로 판단된다. 추후 연구로는 현재의 가속도계만으로 보행 시점뿐 만아니라, 중력가속도 성분을 제거하여 보행 공간변인의 추출이 필요할 것이다.

농촌 공동체 협업활동의 사회연결망분석 - 충남 홍성군 홍동 지역을 중심으로 - (Social Network Anaylsis of Collaborative Activity in Rural Community - Case study of Hong-Dong area in Chungman Province, South Korea -)

  • 황바람
    • 농촌계획
    • /
    • 제23권2호
    • /
    • pp.9-17
    • /
    • 2017
  • Rural development policy has changed from hardware based development to community revitalization. The purpose of this study is to analyze social network of collaborative activity among rural organizations as fundamental of community. The material used in this study is a record of collaborative activites in the community newsletter of Hong-Dong area. 161 of collaborative activities (links) and 75 of organizations (nodes) are investigated in network. 6 collaborative activity type ('Education', 'Socializing', 'Meeting', 'Culture', 'Event' and 'Labor') is classified. 'Socializing' is inclusive of approximately half of whole network (50.67%). Closeness centraization, degree centralization and betweenness centralization are measured on top in 'Education', 'Meeting' and 'Event' type. Scatter plot analysis using degree and betweenness centrality index, 'Maeul Revitalization Center', 'Balmak Library', 'Woori-Maeul Medical Co-op', 'Support Center for Female Farmers', 'Hongdong Middle School' and 'Mundang Sustainable Agriculture Education Center' are resulted as the core organization in network. Geographical distribution of collaborative activity is not only concentated in Hong-Dong Myeon but also networked with adjacent administrative district. This study finds its purpose in the detailed analysis of network characteristics of collaborative activity within Hong-Dong area which is representative developed rural community in Korea.

수소 충전소에 대한 정량적 안전성 평가 (Quantitative Safety Assessment for Hydrogen Station)

  • 성대현;이광원;김태훈;오동석;오영달;서두현;김영규;김은정
    • 한국안전학회지
    • /
    • 제27권3호
    • /
    • pp.111-116
    • /
    • 2012
  • This study is about the quantitative safety assessment of hydrogen station in Korea operating with on-site type. This was written by background information that before qualitative safety assessment to write. For the qualitative safety assessment method, the study used FMEA(failure mode & effect analysis) and HAZOP(hazard & operability), and adopted the FTA(fault tree analysis) as the quantitative safety assessment method. To write the FTA, we wrote FT by Top event that hydrogen leakage can be called most serious accident of hydrogen station. Each base event collect reliability data by reliability data handbook, THERP-HRA and estimation of the engineering. Assessment looked at the high frequency and the possible risk through Gate, Importance, m.cutsets analysis.

객체지향 폼 시스템(Form System)의 설계 (Design of Object-Oriented Form System)

  • 음두헌
    • 한국정보처리학회논문지
    • /
    • 제1권1호
    • /
    • pp.50-62
    • /
    • 1994
  • 대부분의 데이터베이스 사용자 들은 폼들을 조작함으로써 데이터베이스 시스템을 사용한다. 본 논문에서는 이러한 폼들에 관한 기술 및 각 기술이 폼의 동작에 어떠한 효과를 미치는 가에 대해 논한다. 상용제품들이 지원하는 폼 시스템들을 고찰해 본 결과 어느 것도 이상적인 폼이 갖추어야 할 모든 기능을 제공하지 못한다. 본 논문에 서는 위의 상용 폼 패키지들이 갖고 있는 제한성들을 대부분 극복할 수 있는 새로운 설계방법을 제시한다. 새로운 시스템은 객체지향, 사건중심(event-driven)이며 계층 구조의 복합 블럭(composite block)을 지원한다. 또한 기본적으로 모드리스 폼을 생성 한다. 새로운 폼 시스템에서, 폼은 톱 레블의 블럭이며 블럭은 어토믹 또는 복합 구조 로 정의되는데 메소드들이 직접 함께 포함될 수 있다. 메시지들은 이와 같은 폼 객체 들 사이에서 상호 전달되어 처리된다. 새로운 시스템 하에서의 폼의 정의는 파스칼과 비슷한 문법에 의한 스크립트로써 이루어지므로 매우 간단하다.

  • PDF