• Journal of Preventive Medicine and Public Health
• /
• 제15권1호
• /
• pp.5-16
• /
• 1982

The Saemaul Undong has brought great improvements tothe life-style environment of rural communities, but it has not been able to focuson a health program. In order to improve rural health, develop human resources, and utilise the nation's manpower, the Saemaul Undong should focus on a community health project. Mobilizing the manpower for such a project can be done by providing opportunities for youth and young adults, especially village women, to betrained as primary health caretakers. This project can be achieved through the joint support of the Ministry of Horne Affairs, the Ministry of health and Social Affairs, and other Ministries. It will take decision and courage by government officials to implement such a grand plan, but it is a very crucial task to promote primary health care throughout the whole nation. This calls for top leader's concern & will to adovocate and support a 'Saemaul Movement for health', giving health asfirst priority to the Saemaul Undong as afresh political drive of the fifth Republic of Korea Government.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1580-1581
• /
• 2011

The linear accelerator of Pohang Accelerator Laboratory(PAL) will drive a top-up mode operation in PLS-II(Pohang Light Source-II). Due to this kind of the operation mode, the electron gun is expected to have shorter life time of the cathode. Further in the PLS-II, two gate valves will be installed in front of the electron gun. The distance between the pre-bunching section and the electron gun will increase by 400 mm compared to the existing system due to the insertion of these gate valves. As a result the incident electron beam. One of the goals to improve the beam pulse width is by incorporating suitable biased voltage. In this paper, we will present test results of beam pulse width as a function of different biased voltage and focusing solenoid coil.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.1000-1003
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. This newly suggested actuator features DVD-RAM recording, we achieved the high focus & track AC sensitivity and the greatly stabilized system.

• 산업경영시스템학회지
• /
• 제37권3호
• /
• pp.89-98
• /
• 2014

Platform-based product family design is recognized as an effective method to satisfy the mass customization which is a current market trend. In order to design platform-based product family successfully, it is the key work to define a good product platform, which is to identify the common modules that will be shared among the product family. In this paper the clustering analysis using dendrogram is proposed to capture the common modules of the platform. The clustering variables regarding both marketing and engineering sides are derived from the view point of top-down product development. A case study of a cordless drill/drive product family is presented to illustrate the feasibility and validity of the overall procedure developed in this research.

• 한국기계가공학회지
• /
• 제19권8호
• /
• pp.22-27
• /
• 2020

Ring rolling is a type of forging for manufacturing large-diameter rings. Products manufactured by ring rolling are useful in the aerospace industry because of their excellent mechanical properties and high dimensional accuracy. The major components of the ring rolling process are a mandrel and main roll that shape the inside and outside of the ring, an axial roll that shapes the top and bottom of the ring, and a side rolls to position the ring. In this study, a simulation of ring rolling using finite element method (FEM) was performed. DEFORM, a commercial machining analysis program, was used. Based on the simulations, the mandrel feed force required for machining and the drive torque of the main roll were predicted. It was also possible to identify the metal flow caused by machining.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.397.1-397
• /
• 2002

For high density optical storage, there should be a high NA objective lens and a shorter wavelength laser diode. To secure the disc tilt margin related to the coma aberration, moreover, it's difficult to apply the tilt compensation mechanism into the portable PC. In this paper, we proposed the 3-axis asymmetry pickup actuator with high efficiency symmetric magnetic circuit, which consisted of the top cover type inner yoke for high magnetic flux density, the coil stack unit for the 3-axis independent operation and vertically polarized magnets. (omitted)

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.228-232
• /
• 2002

This paper is reporting the whole process of developing a weight measuring scaler of truck and trailer system for static and dynamic condition. The sensors attached on the top of springs each wheels. Acquisition and data processing performs accurate data extraction from noise environment, filtering and estimation. Weight information was highly distorted with noise and perturbation. Hence the perturbation was classified several categories and evaluated for accurate signal extract. The final products supply accurate and easy readable data of load weight for truck. It supplies total weight as well as loading condition of each axle. It is expected that it give the information to the truck operator of proper amount loading and safe condition to drive with it.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.7-7
• /
• 2000

This paper describes a mirror control system that can adjust the location of side and room mirror of the vehicle automatically using 3D coordinates to monitor the location of driver's eyes. Through analysis of the image inputted by two B/W CCD camera and infrared lamps installed on top of the driver's dashboard, we can estimate the values of 3D coordinate of the driver's eyes. Using these values, this system can determine the absolute position of each mirror and activate each actuator to the appropriate position. The stereo vision system can detect the driver's eyes whether it is day or night by virtue of infrared Lamps. We have tested this system using 10 drivers who drive a car currently, and most of the drivers were satisfied with the convenience of this system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2167-2169
• /
• 1999

A pulse transformer producing pulses with the peak power of 200-MW (400 kV 500 A at load side with $4.4{\mu}s$ flat-top) is required to drive the 80-MW pulsed klystron in the PLS linac. We have designed and manufactured the high power pulse transformer with 1 : 17 turn ratio. Its primary functions are to match the impedance of klystron tube to the modulators, and to provide step-up of the voltage. To obtain a fast rise time of the pulse voltage. Low leakage inductance and low distributed capacitance design is very important. In this paper, we discuss the equivalent circuit analysis of the pulse transformer, and present the full power performance test results of pulse transformer.

• 산업경영시스템학회지
• /
• 제18권36호
• /
• pp.265-273
• /
• 1995

This paper is to analyze and provide some managerial requirements for the successful implementation of total productive maintenance system. It tries to identify determining factors for success and reasons for the failures of TPM, based on the research of a survey and an empirical study through the years in Korea. The findings are such that many companies have not been engaged in planning and control the maintenance cost and their maintenance activities are not organized systematically. However, many indicators show that the number of finns which try to introduce and implement TPM is getting increased. The successful implementation of TPM depends largely on how top management perceives TPM and how the firm responds In the changes of organization and of the role of workers to adapt this new concept of work. It is required that TPM is perceived as a means to achieve the firm's business objectives. It is recommended that each company constructs and develops its own model and procedures to drive the effort for TPM implementation.