• 대한치과보철학회지
• /
• 제39권6호
• /
• pp.633-640
• /
• 2001

Statement of problem. Relatively low success rate of root analogue implant system was supposed to be due to the time duration between extraction and implant installation. The use of three-dimensional computer tomography and the reconstruction of objects using rapid prototyping methods would be helpful to shorten this time. Purpose. This aim of this study was to evaluate the application possibility of the 3-dimensional computer tomography and the rapid prototyping to root analogue implants. Material and methods. Ten single rooted teeth were prepared. Width and height of the teeth were measured by the marking points. This was followed by CT scanning, data conversion and rapid prototyping model fabrication. 2 methods were used; fused deposition modelling and stereolithography. Same width and height of this models were measured and compared to the original tooth. Results. Fused deposition modelling showed an enlarged width and reduced height. The stereolithography showed more exact data compared with the fused deposition modelling. Smaller standard deviation were recorded in the stereolithographic method. Overall width error from tooth to rapid prototyping was 7.15% in fused deposition modelling and 0.2% in stereolithography. Overall height showed the tendency of reducing dimensions. Conclusion. From the results of this study, stereolithography seems to be very predictable method of fabricating root analogue implant.

• The Journal of Advanced Prosthodontics
• /
• 제14권1호
• /
• pp.1-11
• /
• 2022

PURPOSE. The maximum width between the mesial and distal labial transitional line angles, described as "esthetic width" herein, could significantly influence the visual perception of the teeth and smile. This study aimed to conduct biometric research on esthetic width and to explore whether regular distribution exists in the esthetic width of human teeth. MATERIALS AND METHODS. A total of 4,264 maxillary and mandibular anterior teeth were measured using the Geomagic studio software program. The proportions of maxillary to mandibular homonymous teeth and proportions between the adjacent teeth were calculated. Bilateral symmetry and the correlation between the esthetic and mesiodistal widths were both accounted for during the measurement procedures. RESULTS. The mean esthetic widths were 6.773 ± 0.518 mm and 4.329 ± 0.331 mm for maxillary and mandibular central incisors, respectively, 5.451 ± 0.487 mm and 5.008 ± 0.351 mm for maxillary and mandibular lateral incisors, respectively, and 3.340 ± 0.353 mm and 5.958 ± 0.415 mm for maxillary and mandibular canines, respectively. Except for the mandibular canines, no significant difference in esthetic width was found among homonymous teeth from the same jaw. A high linear correlation was found between the esthetic and mesiodistal widths of the same tooth, except for the maxillary canines. Esthetic width proportions among different tooth categories showed some regular patterns, which were similar to those of the mesiodistal width. CONCLUSION. Esthetic width is regularly distributed among the teeth in the Chinese population. This could provide an important reference for anterior dental restorations and dimension recovery in esthetic reconstruction of anterior teeth.

• 대한소아치과학회지
• /
• 제33권3호
• /
• pp.510-521
• /
• 2006

본 연구는 총생에 영향을 미치는 중요한 요소가 무엇인지 알아보기 위해 시행하였으며 총생군 50명(남녀 각 25명)과 정상 교합군 40명(남녀 각 20명)에서 상하악 모형을 제작하여 이를 3D model로 변환하였으며 컴퓨터 상에서 치아의 근원심폭경과 악궁의 길이 변연길이, 견치간 폭경, 구치간 폭경을 계측 및 분석하여 다음과 같은 결론을 얻었다. 1. 치아크기 분석시 상악에서는 측절치와 제1,2소구치에서 총생군의 치아가 더 크게 나타났으며(P<0.05) 나머지 치아의 크기 및 치아크기합계에서는 차이가 없었다(P>0.05). 2. 하악에서는 중절치와 견치 및 제 1,2 소구치의 크기 그리고 치아크기합계에서 군간에 차이가 관찰되었다(P<0.05). 3. 악궁에 대한 평가시 상악에서는 악궁 변연길이와 구치간 폭경은 총생군에서 더 작았고 견치간 폭경은 총생군에서 더 컸으며 (P<0.05), 악궁의 장경에 있어서는 차이가 없었다(P>0.05). 4. 하악에서는 악궁 변연길이는 총생군에서 더 작았으나(P<0.05), 악궁의 장경 및 구치간 폭경, 견치간 폭경에서는 차이가 인정되지 않았다(P>0.05). 5. ALD와 각 변수간의 상관관계를 분석한 결과 상악에서는 악궁 변연길이와$({\gamma}=-0.348)$ 구치간 폭경 $({\gamma}=-0.343)$, 소구치크기와$({\gamma}=-0.335)$ 비교적 높은 상관관계를 보였고 하악에서는 치아크기합계를$({\gamma}=-0.454)$ 비롯한 모든 치아크기와 높은 상관관계를 보였다. 6. 석고모형 계측치와 삼차원모형 계측치를 비교한 결과 석고모형에 비해 삼차원모형 계측치가 좀더 크게 계측되었으며 (P<0.05), 오차의 범위는 0.01-0.47mm이었다. 7 검사자내의 오차를 분석하기 위해 상관분석을 시행한 결과 석고모형 계측시 보다 삼차원모형 계측치의 재현도가 높음을 알 수 있었다(P<0.05). 이상의 결과를 종합하여 볼때, 총생이 존재할 때 상악에서는 큰 치아와 좁은 악궁이 복합적으로 기여하며 하악에서는 치아 크기가 더 중요한 요소로 작용하는 것으로 생각된다. 또한 본 연구에서 사용된 삼차원모형은 현재 적절하게 사용가능하지만 향후 개선 보완이 필요할 것으로 사료된다.

• 대한치과보철학회지
• /
• 제36권6호
• /
• pp.867-877
• /
• 1998

The purpose of this study was to investigate the ideal locations and dimensions of bristles for the patients who were installed with fixed prostheses and severely involved periodontitis. The models of 16 pts were analysed and the resullts were as follows: 1. There were no tooth brushes in the market, which were proper for the patients who were installed with fixed prostheses and had severely periodontally involved teeth. 2. The neck portion of the tooth brush should be narrow as possblly. 3. The size of tooth brush should be analyzed by the size of arch. 4. The width of tooth brush should be analyzed by the degree of bone recession. 5. The custom made tooth brush may be ideal, if possible.

• 대한기계학회논문집A
• /
• 제25권11호
• /
• pp.1720-1729
• /
• 2001

Wear characteristics of Nylon and acetal pinions against steel gears for different pitch line velocities was studied with a power circulating gear test rig under unlubricated condition. Specific wear rate was measured as a function of tooth number, module, tooth width and total revolution. The worn tooth surfaces were examined with a profile projector. The Nylon pinion showed lower specific wear rate than the acetal pinion. However, the Nylon pinion was fractured at high tooth loads, whereas the acetal pinion exhibited a steady wear behavior. The wear characteristics of Nylon pinion varied significantly with the Pitch line velocity. Wear occurred most severely at the tooth tip and the region immediately below the pitch line of pinion. The dominant wear mechanisms were adhesion and abrasion.

• 대한치과보철학회지
• /
• 제42권1호
• /
• pp.11-20
• /
• 2004

Problem : The several studies were reported to the effects of individual tooth tray with the parallel tooth, but not reported to the effect of individual tooth tray with severe undercut in impression making. Purpose : The purpose of this study is to examine the effect of individual tooth tray; 1) the accuracy of impression in terms of distance. 2) reproducibility of pocket. Material and methods : In this study, a metal model with 3 teeth including tooth prepared 30-degree undercut and gingival crevice of the depth 5mm, width 0.4mm was cast. Impressions of the metal model were taken in 5 times used 4 kinds of impression materials with individual tooth tray and another impression taking were made with conventional method without individual tooth, used same materials, procedure. The stone models were made. Distances between abutments were measured with a Micromeasurescoup-mm. Result : The following results were obtained ; 1. In the comparisonof inter-abutment distance between parallel tooth without individual tooth tray, 4elastomeric materials have not significant difference to the metal model(p>0.05). 2. In the comparisonof inter-abutment distance with undercut tooth without individual tooth tray, 4elastomeric materials have a significant difference to the metal model(p<0.05), especially polyether's dimensional change is large. 3. If individual tooth tray was used to take impression in abutment teeth with severe undercut, more stable results was achieved easily than conventional method. (p>0.05). 4. It is not true that the pressure of impression material with individual tooth tray increased to gingival sulcus. Conclusion : By the results, I knew the fact that individual tooth tray was useful impression method on the teeth with severe undercut for the dimensional stability. Also, I could not confirm the fact that individual tooth tray would increase the penetrating pressure into cervice.

• 대한소아치과학회지
• /
• 제38권4호
• /
• pp.427-434
• /
• 2011

중심교합위의 상태에서 편측 혹은 양측으로 상악 구치부의 치아가 하악 구치부의 협측으로 위치한 경우를 scissors bite라고 한다. 이는 상악의 폭경이 크거나 하악의 폭경이 좁은 경우 발생한다. Scissors bite의 경우 방치하게 되면 하악의 성장이 방해받게 되고 그 결과, 악궁 폭경의 부조화가 심해져 저작 장애를 일으킬 수 있으므로 조기 차단 교정이 반드시 필요하다. 실제 임상에서는 여러 치아의 scissors bite보다 최후방 구치 혹은 그 외 하나의 구치만의 single tooth scissors bite(STSB)을 보이는 경우가 많다. 이러한 STSB의 경우도 방치하게 되면 저작력으로 인하여 구치의 각도가 더욱 악화되므로 즉각적인 치료가 필요하다. 본 증례에서는 STSB를 보이는 7세, 14세, 12세, 16세의 환자에게 각각 criss-cross elastic, 고정성 장치, 가철성 장치, miniscrew를 사용하여 치료한 증례를 보고하였다. 각 환자의 증례에 적합한 장치를 잘 선택하여 사용한다면 치아를 정출시키는 등의 부작용을 야기하지 않고 양호한 결과를 얻을 수 있을 것이다.

• Journal of Periodontal and Implant Science
• /
• 제35권2호
• /
• pp.359-369
• /
• 2005

It has been suggested that morphologic characteristics of the periodontium are partly related to the shape and form of the teeth. Furthermore, the severity of symptoms of periodontal disease have been proposed to differ among these various morphologic entities or "biotypes". The purpose of the present study was to examine the relationship between the form of the crowns in the maxillary anterior tooth segment and (1) a group of morphological characteristics and (2) the thickness of the gingiva. The thickness of gingiva was measured by ultrasonic device(SDM). 100 subjects devoid of symptoms of destructive periodontal disease were examined regarding, e.g., probing depth, gingival recession, width of keratinized gingiva, thickness of the keratinized gingiva. From maxillary study cast, the width(at the apical third-CW) and the length(CL) of the crowns of the 6 anterior teeth were determined. A CW/CL-ratio was calculated for each tooth and averaged for each tooth region. The individual mean CW/CL-ratio values for the central incisors were ranked. The 10 subjects ranked highest and the 10 ranked lowest were selected as having either a long-narrow(group N) or a short-wide(group W) form of the crown of the tooth. The data for each of the examined parameters were averaged for each tooth region in each subject and mean values for subjects in groups W and N were compared using the Student t-test. Stepwise multiple regression analysis, including data from the whole sample, was performed for each tooth region with the thickness of the free gingiva as the dependent variable. The results from the analyses demonstrated that individuals with a long-narrow form of the central incisors displayed, compared to individuals with a short-wide crown, form (l) a narrow zone of keratinized gingiva, (2) a pronounced "scalloped" contour of the gingival margin. There was no significant difference between groups N and W with respect to the thickness of the keratinized gingiva. The CW/CL-ratio data revealed that a certain form of the crowns in the central incisors was accompanied by a similar form in the lateral incisors and canine tooth region. The regression analyses demonstrated that the thickness of the keratinized gingiva in central, lateral incisors and canines was significantly related to the width of the keratinized gingiva.

• 대한치과교정학회지
• /
• 제12권2호
• /
• pp.95-108
• /
• 1982

The purpose of this study was to analyze the growth and development of tooth germ and dental arch related to the bone growth during the fetal period. From 70 maxillae and 61 mandibles of the fetus aged 5, 6, 7, 8, 9 and 10 months, X-ray films were taken and measured. The results were as follows; 1. There was remarkable bone growth in the anterior and posterior area of palatum osseum, that were the intetior portion of both deciduous canines anteriorly and the intero-posterior portion of both deciduous second molars posteriorly, where there was active bone growth and radiate formation of bony trabeculae was found. 2. The Growth of anterior tooth germ was greater than that of posterior tooth germ, so anterior tooth germs were crowded. Especially in maxilla, the tooth germs of deciduous lateral incisors were located inside of dental arch and the tooth germs of deciduous canines were located outside of dental arch. 3. Crowding amount increased with the fetal age because the growth of tooth germs was greater than that of jaw bone. 4. In the growth of upper dental arch, the increase of width was greater than that of length. 5. There was proportional relationship between the area of Palatal Trapezoid and the fetal age.

• Journal of Periodontal and Implant Science
• /
• 제35권3호
• /
• pp.761-776
• /
• 2005

The purpose of the present study was to examine the relationship between the form of the clinical crowns in the maxillary anterior segment and the clinical feature of gingiva such as morphological characteristics and the gingival thickness. Fifty periodontally healthy subjects were clinically examined regarding the probing depth, the thickness of the free gingiva, and the width of the keratinized gingiva. From study models of the maxillary anterior region, the width at cervical third(CW) and the length(CL) of the clinical crown, the papillary height, and the gingival angle of the 6 anterior teeth were measured. Each tooth was classified into 4 groups (longnarrow, NL; narrow, N; wide, W; short-wide, WS) according to CW/CL ratio and all the data were compared between groups NL and WS using independent t-test. Stepwise multiple regression analysis was performed for each tooth region with the gingival thickness at the level of sulcus bottom, the width of keratinized gingiva, and gingival angle as the dependent variables. As the results, the NL group of the upper anterior teeth displayed, higher papilla height, and narrower keratinized gingiva, more acute gingival angle resulting in pronounced "scalloped" contour of the gingival margin, compared to the WS group. There was no significant difference between groups NL and WS with respect to probing depth and the gingival thickness. The regression analyses demonstrated that the gingival thickness in central incisors was significantly associated to the mesio-distal width and bucco-lingual width of the crown, and labial probing depth. The width of keratinized gingiva was significantly associated with labial probing depth in central incisors and with proximal probing depth and gingival angle in lateral incisors, and with labial and proximal probing depth, and gingival angle in canines. The gingival angle was significantly associated with papillary height and CW/CL ratio and additionally with proximal probing depth in central incisors, with the width of keratinized gingiva in lateral incisors, and with labial probing depth and the width of keratinized gingiva in canines. These results indicate that the form of clinical crown in upper anterior region could influence the clinical feature of gingiva and the influencing factors might be different according to the tooth region.