• Journal of Biosystems Engineering
• /
• v.13 no.4
• /
• pp.9-19
• /
• 1988

The threshing of head-feed combine may be accomplished mainly by the action of impact between threshing teeth and rice. In this study, it was attempted to assess threshing performance characteristics of head-feed threshing teeth. And the characteristics of threshing teeth will be applied to the method which could analyze the time and order of impact between teeth and the rice, which was used as a basis for predicting the threshing performance and determining the optimum design parameters. The results of the study are summarized as follows: 1. About 50% of threshed material were threshed by the beginning 7 impacts on the rice bundle. Threshing torque decreased until 25 impacts and did not change thereafter. 2. There was significant difference in the threshability according to the shape of threshing teeth. The triangular-shaped tooth was the most efficient in threshability ratio and the semicircle-shaped tooth was the lowest. There was no significant difference in specific energy requirement for the varied teeth design. Torn-head ratio being generated by the semicircle-shaped and the triangular-shaped teeth in series was less than that by a single tooth with the triangular-shaped and the double setting of the triangular-shaped. Chaff generation ratio by the triangular-shaped and the semicircle-shaped teeth was less than the others tried. 3. The triangular-shaped teeth in series, which was newly designed for this study, showed an intermediate characteristics between the double setting of the triangular-shaped and the semicircle- shaped teeth. Threshability ratio of the triangular-shaped teeth in series was higher than that of the semicircle and lower than the double setting of the triangular-shaped tooth. Torn-head generation ratio for it was about same as that of the semicircle. Chaff being generated by the triangular-shaped teeth in series was about same as the double setting of the triangular-shaped teeth. 4. About 40% of threshed grains which passed through concave were concentrated under the threshing tooth and the rest of grains displayed a skew distribution toward the inlet of threshing chamber.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.263-273
• /
• 1993

The purpose of this study was to analyse the center of resistance of the maxillary first molar using the 3-dimension finite element method. An extracted maxillary first molar of normal shape and average root length was selected and sectioned every 1.5mm parallel to the cementoenamel junction. Each section was traced and digitized to construct 3-D finite element model of the maxillary first molar. After a certain magnitude of counterbalancing moment(M) was applied to the tooth, a varying single force(F) of distomesial direction was applied to a certain point of th tooth until the tooth was translated. The force producing translation(Ft) was substituted to the equation ${\Delta}d=M/Ft$ to calculate the center of resistance of the maxillary first molar. And reducing the alveolar bone level 1.68mm, and 3.36mm below to the cementoenamel junction, the tooth movement was analysed to see the effect of reducing the alveolar bone level to the location of the center of resistance. The results were as follows ; 1. The center of resistance of the maxillary first molar was 3.72mm apical, 1.10mm buccal, and 0.71mm mesial to the geometric center of the horizontally sectioned surface at the cementoenamel junction. This point was 0.36mm apical, 1.20mm buccal, and 0.71mm mesial to the trifurcation point, indicating that it was not on the tooth root. 2. As the alveolar bone level was reduced, the center of resistance of the maxillary first molar was moved to the apical direction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.437-443
• /
• 2005

Dilaceration is most common in maxillary central incisor. Impaction by dilacerated tooth cause orthodontic problem such as tilting of adjacent tooth, midline deviation. Dilaceration is caused by trauma, cyst, other origin and tooth shape, degree of root curvature, location in the alveolar bone, ability of spontaneous eruption should be considered whether treat or not. Labially and lingually dilacerated tooth is difficult to spontaneous eruption. Thus, Prosthetic treatment alternative with extraction, auto transplantation, orthodontic traction with surgical exposure is included within the treatment alternative. These cases are about impacted central incisor with dilacerated root. We use closed eruption technique and guide impacted tooth into normal position by orthodontic traction.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.4
• /
• pp.521-527
• /
• 2018

In dental trauma, reattachment of the original tooth fragment improves the reproduction of original tooth shape, texture, color, and radiolucency; thus, it provides good aesthetics. A 9-year-old boy was referred due to complicated crown-root fracture of the maxillary right central incisor. Although it had poor prognosis due to severe coronal damage and subcrestal fracture, reattachment of the tooth fragment was chosen due to the patient's age. One-visit apexification with mineral trioxide aggregate (MTA) was performed, followed by osteotomy and reattachment of the tooth fragment with post placement. Regular observation revealed no clinical signs or symptoms and no radiologic complications.

• The korean journal of orthodontics
• /
• v.41 no.3
• /
• pp.174-183
• /
• 2011

Objective: Orthodontically induced root resorption (OIRR) involves partial loss of cementum and dentin of teeth caused by routine orthodontic treatment. It decreases root length and influences the function of affected teeth. In this study, the treatment and patient factors causing apical root resorption in Koreans were determined. The observed factors were extraction, gender, age, displacement of root apex, total treatment period, total teeth length, and shape of the root. Methods: The records of 137 patients treated with full, fixed edgewise appliances were obtained from the Department of Orthodontics, Dankook University Dental Hospital, from November 2007 to December 2008. Periapical radiographs of the maxillary central incisors and cephalometric radiographs of each patient were used to assess apical root resorption and type of tooth movement. Results: The mean amount of resorption was $1.62{\pm}1.58mm$. The amount of resorption in the extraction and non-extraction groups was $2.10{\pm}1.64mm$ and $1.18{\pm}1.39mm$, respectively. The amount of root resorption increased with the total tooth length. Severe root resorption (> 4 mm) was related to abnormal root shape (blunt, pointed, or eroded). Conclusions: The variables significantly related to OIRR were extraction, initial tooth length, and root shape.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.33 no.2
• /
• pp.83-88
• /
• 2022

Hunminjeongeum had 17 initial consonant letters. Among them, five consonant letters, those are ㄱ (牙音, molar sound letter), ㄴ (舌音, lingual sound letter), ㅁ(脣音, labial sound letter), ㅅ (齒音, dental sound letter), ㅇ (喉音, guttural sound letter), were served as chief consonants. There was no argument that consonant letters were made by symbolizing the shape of vocal organs during phonation of them. It could be phoniatrically explained that all of five chief consonants were morphologically symbolized from left lateral view of vocal tract during articulation. Although 'ㄱ' was known as molar sound, it was not modeled the shape of molar tooth but modeled the shape of tongue at molar teeth bearing area. The same principle applies to 'ㅅ', and it was represented the shape of upper surface of anterior tongue instead of incisor teeth. 'ㄴ' was a lingual sound and directly shaped the shape of tongue. 'ㄷ' was made by addition of a stroke 'ㅡ' meaning hard palate above 'ㄴ'. 'ㅁ' was represented the shape of lateral view of anterior mouth. 'ㅇ' was looked like shaping left lateral view of laryngopharyngeal space.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.1
• /
• pp.64-75
• /
• 2019

The purpose of this study was to obtain instructions for size selection of prefabricated crown and tooth reduction by 3-dimensional analysis of the size and shape of the maxillary primary central and lateral incisors and prefabricated crowns (celluloid strip, resin veneered stainless steel, and zirconia crowns). The maxillary primary central and lateral incisors of 300 Korean children was scanned with three types of prefabricated crown to create standard three-dimensional tooth models and prefabricated crowns. The shapes of the prefabricated crowns and natural teeth were compared according to four parameters (mesio-distal width, height, labio-palatal width, and labial surface curvature coefficient) and calculated the amount of tooth reduction required for each prefabricated crown. The size 2 resin veneered stainless steel crown, size 1 zirconia crown, and size 2 celluloid strip crown were most similar in shape to the primary central incisor. The size 3 rein veneered stainless steel crown, size 2 zirconia crown, and size 3 celluloid strip crown were most similar to the primary lateral incisor. The amount of tooth reduction was similar in both maxillary primary central and lateral incisors. The incisal reduction was greatest for the zirconia crown. At the proximal surface, the zirconia and celluloid strip crowns required a similar amount of tooth reduction, but more than the resin veneered stainless steel crown. The labial surface reduction was greatest for the zirconia crown. The degree of lingual surface reduction was not significant among the three prefabricated crowns. Among the assessment parameters, mesio-distal crown width was the most important for choosing a prefabricated crown closest to the actual size of the natural crown.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.25-33
• /
• 1983

With electron microscope, author studied on the pulp structure of human primary tooth in shedding stage. Non-carious human primary molar teeth were selected for this study. Using standard methods, specimens were sectioned and examined by light and electron microscope, The results were as follows; 1. In coronal pulp, odontoblasts were replaced by multinucleated odontoclasts, which contained a large number of mitochondria of varying shape and vacuoles in cytoplasm. Where odontoclasts were in contact with tooth surface, the characteristic ruffled border and clear zone were observed. 2. Fibrous tissue with plentiful collagen fibers and fibroblasts was observed adjacent to the dentin in the pulp. Fibroblast contained a number of mitochondria and well-developed rough-surfaced endoplasmic reticulum. 3. Inflammatory cells were observed in the pulp and active fibroblasts could be seen between inflammatory cells. In many cases, cervical epithelium proliferated toward absorbed area. 4. Inflammatory cells consisted of a number of lymphocytes, polymorphonuclear leukocytes, plasma cells and macrophages. Macrophage containing lysosomes in digestive state or phagocyting PMN could be seen. 5. In the primary molar of delayed root resorption, odontoblast layer, zone of Weil and cell-rich zone could be seen at roof of pulp chamber and odontoblast in this area cont과ained some lipid droplets.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.19-25
• /
• 2007

Among the precision reduction gent drivers lot robot system, the cycloid reducer is well known for it's high performances. Designing this reducer, there are many factors which must be considered. First, a geometrical analysis of tooth shape must be drawn from the basic concept. Second, loads, stresses and modification factors on tooth should be calculated exactly. Finally, a computer software to optimize the design of cycloid tooth needs developing on the basis of the geometric and force equations. In this research, the expert system to design the cycloid reducer was developed using Visual C++ so, the most important factors can be obtained automatically as the user put the simple input data.

• International Journal of Oral Biology
• /
• v.48 no.4
• /
• pp.33-44
• /
• 2023

In this review, the regulatory mechanisms of autophagy were described, and its interaction with apoptosis was identified. The role of autophagy in embryogenesis, tooth development, and cell differentiation were also investigated. Autophagy is regulated by various autophagy-related genes and those related to stress response. Highly active autophagy occurrences have been reported during cell differentiation before implantation after fertilization. Autophagy is involved in energy generation and supplies nutrients during early birth, essential to compensate for their deficient supply from the placenta. The contribution of autophagy during tooth development, such as the shape of the crown and root formation, ivory, and homeostasis in cells, was also observed. Genes control autophagy, and studying the role of autophagy in cell differentiation and development was useful for understanding human aging, illness, and health. In the future, the role of specific mechanisms in the development and differentiation of autophagy may increase the understanding of the pathological mechanisms of disease and development processes and is expected to reduce the treatment of various diseases by modulating the autophagic phenomenon.