• Journal of Biosystems Engineering
• /
• v.12 no.3
• /
• pp.42-49
• /
• 1987

The threshing action of the head-fed type threshing unit occurs mainly by the impact between threshing tooth and grains. It may be therefore the most fundamental step to calculate the time and order of the occurrance of impact by the tooth for predicting the performance of threshing unit. The threshing teeth arrangement was defined by length and diameter of threshing dram, number of spiral arrays, number of threshing teeth by kind per one spiral array, number of windings of spiral array around the threshing drum, delay angle of impact line. The linear equations for locus of left and right margin of paddy bundle, spiral array, impact line on the development figure of the threshing drum were expressed by fastors of the threshing teeth arrangement. In the computer program, the teeth which inflict impact were searched successively along the impact line. Searching range and impact condition were defined by the relation between four linear equations. If the impacting tooth was found, time and the kind of threshing tooth was derived from the coordinate of the threshing tooth. At this time the unit torque curve was accumulated on the array of computer memory. At last the completed torque curve of threshing drum shaft was described on the computer screen. Remarkably the peack valae and fluctuation of torque curve was decreased by adopting the delay angle of impact line.

• Journal of Periodontal and Implant Science
• /
• v.34 no.1
• /
• pp.19-28
• /
• 2004

Tooth is the most important element in esthetic consideration on facial area. Tooth alignment which is in harmony with gingiva, lips, and face is also key element. The purpose of this study was to give a clinical discipline for restoration of gingival contour, which contains a ratio of maxillary 6 anterior teeth, research for gingival contour etc., in case of rehabilitation of maxillary anterior teeth. 300 Dankook university dental school students ,who is their twenties and free from periodontitis, participate in this study. The result was from each 70 males and females who had normal occlusion and tooth alignment. Length, width and length/width ratio of maxillary 6 anterior teeth were 0.74-0.81 in male, 0.81-0.84 in female. There was significant difference between male and female. The most deepest position of gingiva in maxillary central incisor and canine was located in distal part of teeth and maxillary lateral incisor was middle portion. In maxillary central incisors, gingival line of the most deepest point appeared significant difference between male and female (p<0.01) whereas there was no difference in lateral incisors and canines. Distance between interdental papilla apex and the most deepest portion appeared significant difference between male and female. Distance of the deepest position of gingiva is statistically significant except maxillary central incisors and lateral incisors. Standard deviation and mean of the width of labio-lingual were measured in cervical area and there was a significant difference both male and female.(p<0.01) From this result, we could get the mean of maxillary anterior gingival line and these results have great value in clinical guidance in studying maxillary anterior teeth.

• The korean journal of orthodontics
• /
• v.46 no.3
• /
• pp.155-162
• /
• 2016

Objective: The aim of this study was to investigate whether labial tooth inclination and alveolar bone loss affect the moment per unit of force ($M_t/F$) in controlled tipping and consequent stresses on the periodontal ligament (PDL). Methods: Three-dimensional models (n = 20) of maxillary central incisors were created with different labial inclinations ($5^{\circ}$, $10^{\circ}$, $15^{\circ}$, and $20^{\circ}$) and different amounts of alveolar bone loss (0, 2, 4, and 6 mm). The $M_t/F$ necessary for controlled tipping ($M_t/F_{cont}$) and the principal stresses on the PDL were calculated for each model separately in a finite element analysis. Results: As labial inclination increased, $M_t/F_{cont}$ and the length of the moment arm decreased. In contrast, increased alveolar bone loss caused increases in $M_t/F_{cont}$ and the length of the moment arm. When $M_t/F$ was near $M_t/F_{cont}$, increases in Mt/F caused compressive stresses to move from a predominantly labial apical region to a palatal apical position, and tensile stresses in the labial area moved from a cervical position to a mid-root position. Although controlled tipping was applied to the incisors, increases in alveolar bone loss and labial tooth inclination caused increases in maximum compressive and tensile stresses at the root apices. Conclusions: Increases in alveolar bone loss and labial tooth inclination caused increases in stresses that might cause root resorption at the root apex, despite the application of controlled tipping to the incisors.

• Journal of Periodontal and Implant Science
• /
• v.43 no.4
• /
• pp.160-167
• /
• 2013

Purpose: This study examined the factors that can be associated with the appearance of the interproximal papilla. Methods: One hundred and forty-seven healthy interproximal papillae between the maxillary central incisors were examined. For each subject, a digital photograph and periapical radiograph of the interdental embrasure were taken using a 1-mm grid metal piece. The following parameters were recorded: the amount of recession of the interproximal papilla, contact point-bone crest distance, contact point-cemento-enamel junction (CEJ) distance, CEJ-bone crest distance, inter-radicular distance, tooth shape, embrasure space size, interproximal contact area, gingival biotype, papilla height, and papilla tip form. Results: The amount of recession of the interproximal papilla was associated with the following: 1) increase in contact point-bone crest, contact point-CEJ, and CEJ-bone crest distance; 2) increase in the inter-radicular distance; 3) triangular tooth shape; 4) decrease in the interproximal contact area length; 5) increase in the embrasure space size; and 6) flat papilla tip form. On the other hand, the amount of gingival recession was not associated with the gingival biotype or papilla height. In the triangular tooth shape, the contact point-bone crest distance and inter-radicular distance were longer, the interproximal contact area length was shorter, and the embrasure space size was larger. The papilla tip form became flatter with increasing inter-radicular distance and CEJ-bone crest distance. Conclusions: The relative position of the interproximal papilla in healthy subjects was associated with the multiple factors and each factor was related to the others. A triangular tooth shape carries a higher risk of recession of the interproximal papilla because the proximal contact point is positioned more incisally and the bone crest is positioned more apically. This results in an increase in recession of the interproximal papilla and flat papilla tip form.

• Journal of Periodontal and Implant Science
• /
• v.38 no.3
• /
• pp.475-482
• /
• 2008

Purpose: To evaluate the safety and efficiency of bone regenerative abilities of silk fibroin nanomembrane(Nanoguide-S) Material and Methods: The objects were 38 patients who had large defect at extraction sockets caused by chronic periodontitis and silk fibroin nano matrix were used on experimental group(N=19) and PLA/PLGA matrix were used on control group(N=19). The width, height, and length by crown-apical direction(socket depth) of defects were measured with the occlusal plane as a reference plane, and tooth axis direction, perpendicular to tooth axis direction were measured on radiographs at 3 months pre-operative, 3 months post-operative. Result: Tissue response to silk fibroin nano matrix and Biomesh were clinically satisfactory and complications such as swelling, exudation, ulceration and vesicles were not found except the ordinary discomfort of operated portion. 3 months later, the width, height, and length by crown-apical direction (socket depth) of defects were clinically improved in both groups with no significant difference. 3 months later radiolucency of tooth axis direction and perpendicular to tooth axis direction were all increased in both groups with no significant difference. Conclusion: By these results biodegradadable silk fibroin nano matrix was efficient in GBR on alveolar bone resorption caused by periodontitis compared to Biomesh.

• The Journal of Internal Korean Medicine
• /
• v.39 no.6
• /
• pp.1321-1328
• /
• 2018

Objective: This study was performed to report on the effects of traditional Korean Medicine as a treatment for a patient with Charcot-Marie-Tooth disease, with lower limb pain as the chief complaint. Methods: We treated this patient with traditional Korean medicine and measured symptom severity using the Visual Analogue Scale (VAS), and the Oswestry Disability Index (ODI) as well as measuring the length of the patient's self-exercising time. Results: After about 7 weeks of treatment, most pathological symptoms had decreased. There was a gradual decline in the VAS and a gradual increase in the length of the self-exercising time. Although there was an increase in the ODI scale during the first 2 weeks, it eventually showed a decline in the rest of the period. Conclusions: Traditional Korean medicine can be a solution for the patients with Charcot-Marie-Tooth disease suffering from peripheral neurological symptoms.

• Journal of Oral Medicine and Pain
• /
• v.45 no.4
• /
• pp.83-88
• /
• 2020

Purpose: Growth differentiation factor 11 (GDF11) and myostatin (MSTN) are closely-related transforming growth factor β family members reported to play crucial roles in bone formation. We previously reported that, in contrast to MSTN, GDF11 promotes osteogenesis of vertebrae and limbs. GDF11 has been also reported as an important regulator in tooth development by inducing differentiation of pulp stem cells into odontoblasts for reparative dentin formation. The goal of this study was to investigate the differential roles of GDF11 and MSTN in dental and cranial bone formation. Methods: Micro-computed tomography analysis was performed on cranial bones, including frontal, parietal, and interparietal bones, and lower incisors of wild-type, Gdf11 knockout (Gdf11-/-), and Mstn knockout (Mstn-/-) mice. Tissue volume, thickness, and mineral density were evaluated for both cranial bone and lower incisors. Lower incisor lengths were also measured. Because Gdf11-/- mice die shortly after birth, analysis was performed on newborn (P0) mice. Results: Compared to those of Mstn-/- mice, cranial bone volume, thickness, and mineral density levels were all significantly diminished in Gdf11-/- mice. Tissue mineral density of Gdf11-/- mice were also significantly decreased compared to wild-type mice. Likewise, lower incisor length, tissue volume, thickness, and mineral density levels were all significantly reduced in Gdf11-/- mice compared to Mstn-/- mice. Incisor length was also significantly decreased in Gdf11-/- mice compared to wild-type mice. Mstn-/- mice exhibited mildly increased levels of tissue volume, thickness, and density in cranial bone and lower incisor compared to wild-type mice although statistically not significant. Conclusions: Our findings suggest that GDF11, unlike MSTN, endogenously promotes cranial bone and tooth development.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.51 no.1
• /
• pp.55-65
• /
• 2024

This study aimed to assess the accuracy of tooth widths, intermolar widths, and arch lengths acquired through two intraoral scanners, including iTero Element Plus Series (Align Technology, Santa Clara, CA, USA) and Trios 4 (3Shape, Copenhagen, Denmark), specifically on mixed dentition. A total of 30 subjects were divided into 2 groups, each undergoing both alginate impressions and intraoral scanning using either the iTero or Trios scanner. The plaster models were measured with a caliper, while the digital models were measured virtually. In the iTero group, all tooth width measurements exhibited differences compared to the plaster values, except for maxillary left lateral incisors (p = 0.179), mandibular right (p = 0.285), and left (p = 0.073) central incisors. The Trios group did not display significant differences in any of the tooth width measurements. Intermolar width comparisons for both groups indicated differences, except for mandibular primary canine to primary canine values (p = 0.426) in the iTero group. Regarding arch length, the mandibular anterior, maxillary right, and left arch lengths in the iTero group demonstrated larger caliper values than those of iTero. Conversely, in the Trios group, all parameters showed smaller caliper values, especially in upper anterior, maxillary right, mandibular right, and mandibular left arch lengths with significance (p = 0.027, 0.007, 0.003, and 0.047, respectively). Despite the differences between the two groups, digital models might be clinically suitable alternatives for plaster models. Pediatric dentists should carefully assess these differences, as a comprehensive evaluation would result in precise orthodontic treatment planning and favorable outcomes for young patients with mixed dentition.

• The korean journal of orthodontics
• /
• v.51 no.6
• /
• pp.366-374
• /
• 2021

Objective: This study investigated the impact of a single piezocision in the maxillary alveolar process on the speed of tooth movement. The null hypothesis was that the speed of tooth movement will be equal with and without piezocision. Methods: All maxillary molars on one side were moved against the combined incisors in 10 ten-week-old male Wistar rats. Under general anesthesia, a force of 25 cN was applied on either side using a Sentalloy closed coil spring. After placing the orthodontic appliance, vertical corticision was performed using a piezotome under local anesthesia, 2 mm mesial from the mesial root of the first molar on a randomly selected side; the other side served as the control. At the beginning of the treatment, and 2 and 4 weeks later, skull micro-computed tomography was performed. After image reconstruction, the distance between the mesial root of the first molar and the incisive canal, and the length of the mesial root of the first maxillary molar were measured. Moreover, the root resorption score was determined as described by Lu et al. Results: Significantly higher speed of tooth movement was observed on the corticision side; thus, the null hypothesis was rejected. The loss of root length and root resorption score were significantly more pronounced after piezocision than before. A strong correlation was observed between the speed of tooth movement and root resorption on the surgical side, but the control side only showed a weak correlation. Conclusions: Piezocision accelerates orthodontic tooth movement and causes increased root resorption.

• Journal of dental hygiene science
• /
• v.6 no.1
• /
• pp.29-34
• /
• 2006

This study was undertaken to compare the tooth and arch size between crowding patient and normal subjects. Two group of dental casts were selected on the basis of crowding patients and normal subjects. One group, consisting of 40 pair of dental casts(20 male and 20 female), exhibited noncrowded dentitions. A second group, consisting of 40 pairs of dental cast(21 male and 21 female), exhibited remarkably crowding need for orthodontic treatment. Tooth width measurements were made with a sliding digital caliper with Vernier scale neared 0.01 mm. Mean, standard deviation, T-test of the following parameters were used to compare two group : individual mesiodistal crown widths, arch width and arch length. The following result were obtained. In the mesiodistal crown widths, normal subjects had generalized larger teeth than Wheeler's results(human tooth size index), except for maxillary central incisor, maxillary 2nd premolar, mandibular canine, and mandibular 1st molar. In the orthodontic patients with crowded dentitions, the mesiodistal tooth crown widths were generalized larger teeth than noncrowded normal subjects. In the arch width and arch length, the crowded dentition group had smaller arch width and arch length than the normal group.