• 대한소아치과학회지
• /
• 제31권1호
• /
• pp.92-97
• /
• 2004

청소년기에는 두개악안면부위의 외상성 손상이 흔하다. 그러나 상아질, 백악질, 치수를 포함하는 치아파절로 정의 되는 치근파절을 비교적 드물다. 성장기 아동에 있어서 외상으로 인한 손상은 심리적인 위축감, 안모에 대한 열등감 등의 정서적인 문제와 치조골과 안모의 성장이나 치간 간격의 유지에 영향을 미치는 등의 지장을 초래하기 때문에 보존적인 치료가 요구된다. 첫 번째 증례는 9세의 남아로 상악 우측 중절치의 치수노출을 동반한 치관 파절과 치근단부위에 치근의 수평 파절이 관찰되어 치관부 파절편 치수만 제거하고 수산화칼슘을 이용하여 충전하였다. 6개월 후 방사선 사진에서 dentinal bridge의 형성을 확인할 수 있었고 치근단부는 병적 소견 없이 정상적으로 발육되고 있었다. 1년 3개월 후 방사선 사진에서 치근단부의 형성이 완료된 것을 확인하여 gutta percha를 이용하여 영구 충전을 시행하였다. 두 번째 증례는 7세의 여아로 상악 우측 중절치의 치수 노출을 동반한 치근의 수직 파절이 관찰되어 인위적 발거 후 레진 시멘트를 이용하여 파절편 부착 후 재식하였다. 술 후 8개월 동안의 관찰결과 특이한 임상적 증상은 나타나지 않았다. 이상의 증례에서 치근 파절이 발생한 치아에서 보존적 치료를 시행하였고 이에 양호한 결과를 얻었기에 보고하는 바이다.

• Imaging Science in Dentistry
• /
• 제43권3호
• /
• pp.171-177
• /
• 2013

Purpose: The purpose of this study was to compare the efficacy of two imaging modes in a cone beam computed tomography (CBCT) system in detecting root fracture in endodontically-treated teeth with fiber posts or screw posts by selecting two fields of view. Materials and Methods: In this study, 78 endodontically-treated single canal premolars were included. A post space was created in all of them. Then the teeth were randomly set in one of 6 artificial dental arches. In 39 of the 78 teeth set in the 6 dental arches, a root fracture was intentionally created. Next, a fiber post and a screw post were cemented into 26 teeth having equal the root fractures. High resolution (HiRes) and standard zoom images were provided by a CBCT device. Upon considering the reconstructed images, two observers in agreement with each other confirmed the presence or absence of root fracture. A McNemar test was used for comparing the results of the two modes. Results: The frequency of making a correct diagnosis using the HiRes zoom imaging mode was 71.8% and in standard zoom was 59%. The overall sensitivity and specificity in diagnosing root fracture in the HiRes mode were 71.79% and 46.15% and in the standard zoom modes were 58.97% and 33.33%, respectively. Conclusion: There were no significant differences between the diagnostic values of the two imaging modes used in the diagnosis of root fracture or in the presence of root canal restorations. In both modes, the most true-positive results were reported in the post space group.

• Imaging Science in Dentistry
• /
• 제48권3호
• /
• pp.177-184
• /
• 2018

Purpose: This study was performed to evaluate the influence of voxel size and the accuracy of 2 cone-beam computed tomography (CBCT) systems in the detection of vertical root fracture (VRF) in the presence of intracanal metallic posts. Materials and Methods: Thirty uniradicular extracted human teeth were selected and randomly divided into 2 groups(VRF group, n=15; and control group, n=15). The VRFs were induced by an Instron machine, and metallic posts were placed in both groups. The scans were acquired by CBCT with 4 different voxel sizes: 0.1 mm and 0.16 mm (for the Eagle 3D V-Beam system) and 0.125 mm and 0.2 mm (for the i-CAT system) (protocols 1, 2, 3, and 4, respectively). Interobserver and intraobserver agreement was assessed using the Cohen kappa test. Sensitivity and specificity were evaluated and receiver operating characteristic analysis was performed. Results: The intraobserver coefficients indicated good (0.71) to very good (0.83) agreement, and the interobserver coefficients indicated moderate (0.57) to very good (0.80) agreement. In respect to the relationship between sensitivity and specificity, a statistically significant difference was found between protocols 1 (positive predictive value: 0.710, negative predictive value: 0.724) and 3 (positive predictive value: 0.727, negative predictive value: 0.632) (P<.05). The least interference due to artifact formation was observed using protocol 2. Conclusion: Protocols with a smaller voxel size and field of view seemed to favor the detection of VRF in teeth with intracanal metallic posts.

• Imaging Science in Dentistry
• /
• 제48권4호
• /
• pp.245-254
• /
• 2018

Purpose: To assess the effects of object position in the field of view (FOV) and application of a metal artifact reduction (MAR) algorithm on the diagnostic accuracy of cone-beam computed tomography (CBCT) for the detection of vertical root fractures(VRFs). Materials and Methods: Sixty human single-canal premolars received root canal treatment. VRFs were induced in 30 endodontically treated teeth. The teeth were then divided into 4 groups, with 2 groups receiving metal posts and the remaining 2 only having an empty post space. The roots from different groups were mounted in a phantom made of cow rib bone, and CBCT scans were obtained for the 4 different groups. Three observers evaluated the images independently. Results: The highest frequency of correct diagnoses of VRFs was obtained with the object positioned centrally in the FOV, using the MAR algorithm. Peripheral positioning of the object without the MAR algorithm yielded the highest sensitivity for the first observer (66.7%). For the second and third observers, a central position improved sensitivity, with or without the MAR algorithm. In the presence of metal posts, central positioning of the object in the FOV significantly increased the diagnostic sensitivity and accuracy compared to peripheral positioning. Conclusion: Diagnostic accuracy was higher with central positioning than with peripheral positioning, irrespective of whether the MAR algorithm was applied. However, the effect of the MAR algorithm was more significant with central positioning than with peripheral positioning of the object in the FOV. The clinical experience and expertise of the observers may serve as a confounder in this respect.

• Restorative Dentistry and Endodontics
• /
• 제44권3호
• /
• pp.31.1-31.9
• /
• 2019

Objectives: To compare the formation of dentinal defects using stainless-steel hand K-files (HFs), rotary files, reciprocating files, and Self-Adjusting File (SAF), when used for oval root canals. Materials and Methods: One hundred and forty extracted human mandibular premolar with single root and oval canal were selected for this study. Oval canals were confirmed by exposing to mesio-distal and bucco-lingual radiographs. Teeth with open apices or anatomic irregularities were excluded. All selected teeth were de-coronated perpendicular to the long axis of the tooth, leaving roots segments approximately of 16 mm in length. Twenty teeth were left unprepared (control), and the remaining 120 teeth were divided into 6 groups (n = 20) and instrumented using HF (size 40/0.02), Revo-S (RS; size 40/0.06), ProTaper NEXT (PTN; size 40/0.06), WaveOne (WO; size 40/0.09), RECIPROC (RC; size 40/0.06), and the SAF (2 mm). Roots were then sectioned 3, 6, and 9 mm from the apex, and observed under stereomicroscope, for presence of dentinal defects. "No defect" was defined as root dentin that presented with no visible microcracks or fractures. "Defect" was defined by microcracks or fractures in the root dentin. Results: The control, HF, and SAF did not exhibit any dentinal defects. In roots instrumented by RS, PTN, WO, and RC files exhibited microcracks (incomplete or complete) in 40%, 30%, 55%, and 50%, respectively. Conclusions: The motor-driven root canal instrumentation with rotary and reciprocating files may create microcracks in radicular dentine, whereas the stainless-steel hand file instrumentation, and the SAF produce minimal or less cracks.

• Imaging Science in Dentistry
• /
• 제51권1호
• /
• pp.55-62
• /
• 2021

Purpose: This study evaluated the influence of a metal artifact reduction (MAR) tool in a cone-beam computed tomography (CBCT) device on the diagnosis of vertical root fractures (VRFs) in teeth with different root filling materials. Materials and Methods: Forty-five extracted human premolars were classified into three subgroups; 1) no filling; 2) gutta-percha; and 3) metallic post. CBCT images were acquired using an Orthopantomograph 300 unit with and without a MAR tool. Subsequently, the same teeth were fractured, and new CBCT scans were obtained with and without MAR. Two oral radiologists evaluated the images regarding the presence or absence of VRF. Receiver operating characteristic (ROC) curves and diagnostic tests were performed. Results: The overall area under the curve values were 0.695 for CBCT with MAR and 0.789 for CBCT without MAR. The MAR tool negatively influenced the overall diagnosis of VRFs in all tested subgroups, with lower accuracy (0.45-0.72), sensitivity (0.6-0.67), and specificity (0.23-0.8) than were found for the images without MAR. In the latter group, the accuracy, sensitivity, and specificity values were 0.68-0.77, 0.67-083, and 0.53-087, respectively. However, no significant difference was found between images with and without MAR for the no filling and gutta-percha subgroups (P>0.05). In the metallic post subgroup, CBCT showed a significant difference according to MAR use (P<0.05). Conclusion: The OP 300 MAR tool negatively influenced the detection of VRFs in teeth with no root canal filling, gutta-percha, or metallic posts. Teeth with metallic posts suffered the most from the negative impact of MAR.

• 구강회복응용과학지
• /
• 제36권4호
• /
• pp.262-271
• /
• 2020

변연골 하방으로까지 파절선이 연장된 치아를 수복하기 위해 파절선의 노출 및 생물학적 폭경의 재확립을 위한 삭제형 골수술을 동반한 외과적 치관 연장술을 고려해 볼 수 있다. 그러나 이 술식은 특히 전치부에서 심미성을 훼손시킬 수 있다. 따라서 지지골과 치은을 희생시키지 않으면서 파절선을 치조와 하방에서 상방으로 위치 시킬 수 있는 교정적 정출술이 권장된다. 이 술식은 생물학적 폭경의 재확립과 더불어 수복물을 건전한 치아 구조에 위치할 수 있도록 해 준다. 또 다른 대안으로, 교정적 정출술 보다 방법이 간단하며 시간이 적게 소요되고 한번의 술식만으로 정출이 완료되는 외과적 정출술도 고려해 볼 수 있다. 외과적 정출술을 이용할 경우 구강내 교정 장치를 위치시키고 조정하기 위해 환자가 치과에 여러번 방문할 필요가 없다. 본 연구에서는 상악 중절치에서 치관-치근 파절이 발생한 경우 교정적 정출술 또는 외과적 정출술을 통한 다각적 방법을 병용함으로써 성공적으로 수복한 증례를 보고하고자 한다.

• 구강회복응용과학지
• /
• 제31권4호
• /
• pp.378-386
• /
• 2015

피개 의치는 의치의 안정과 유지력 증가라는 장점을 갖지만 지대치가 우식 또는 치주질환에 이환되기 쉬우며 의치의 두께가 얇아짐으로써 의치가 파절되기 쉽다는 단점도 갖고 있다. 자성 어태치먼트 피개 의치는 수직적 유지력은 크지만 수평적 유지력은 작으므로 지대치나 임플란트에 덜 위해한 힘을 가하며, 다른 기계적 유지장치에 비해 마모나 파손 등이 적다는 장점이 있다. 피개 의치에서 나타나는 의치의 파절은 의치상의 두께가 얇아져서 발생하기도 하지만, 연조직과 경조직, 임플란트와 자연치의 압하량 차이로 인해 발생하기도 한다. 이를 보상하기 위해 silicone ball이 자석 안에 삽입되어있는 자성 어태치먼트가 개발되었으며, 이를 이용해 피개 의치를 제작한 증례에서 우수한 결과가 나타나 보고하고자 한다.

• 대한소아치과학회지
• /
• 제30권3호
• /
• pp.465-470
• /
• 2003

소아에서 영구 전치부에 강한 외상이 가해지는 경우 단순한 수평파절보다는 비스듬한 수직-수평파절을 보이는 경우가 많으며 파절선이 치은연하로 위치되는 경우도 많은데 그러한 경우 최근에 의도적 재식술을 이용한 치료가 많이 시도되고 있다. 파절치를 탈구시킨 후 순설측을 뒤바꿔서 재식할 경우치근의 방향 차이로 인하여 발치와에서 상방으로 위치되면서 치관의 길이를 증가시킬 수 있으며 파절선을 순측에 위치시켜 시야확보를 용이하게 할 수 있다. 본 증례에서는 치아외상으로 상악 중절치가 치관-치근 파절된 혼합치열기 환아에서 파절치를 $180^{\circ}$ 회전시켜 의도적 재식술을 시행하여 치료한 후 양호한 결과를 얻었다. 이에 예전의 치료방법과 더불어 회전을 이용한 의도적 재식술은 치관-치근 파절치의 또다른 치료 방법이 되리라 사료된다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제34권3호
• /
• pp.186-199
• /
• 2012

Purpose: Single implants, of which screw loosening has been observed frequently, presents problems such as fixtures fractures, marginal bone loss, and inflammation of the soft tissue around the implant. However, the single implant is more conservative, cost effective, and predictable compared to the 3 unit bridge with respect to the long-term outcome. This study evaluated the survival rate as well as future methods aimed at increasing the survival rate in single implants in posterior teeth. Methods: Among the implants placed in the Dankook University Dental Hospital department of Oral & Maxillofacial surgery from January 2001 to June 2008, 599 implants placed in the maxillar and mandibular posterior were evaluated retrospectively. Survival rates were investigated according to implant location, cause of tooth loss, gender, age, general disease, fixture diameter and length, surface texture, implant type and shape, presence of bone graft, surgery stage, surgeons, bone quality and opposite teeth. Results: Out of 599 single implants in posterior teeth, 580 implants survived and the survival rate was 96.8%. The difference in survival rate was statistically significant according to the implant location. The survival rate was low (84.2%) in implants exhibiting a wide diameter (${\geq}5.1mm$) and the surface treated by the acid etching group demonstrated a significantly lower survival rate (91.1%). One stage surgical procedure, which implemented a relatively better bone quality survival rate (100%), was higher than the two stage surgical procedure (96.1%). The survival rate of type IV bone quality (75%) was significantly lower than the other bone quality. Conclusion: Single posterior teeth implant treatments should use an improved surface finishing fixture as well as careful and safe procedures when performing implant surgery in the maxilla premolar and molar regions since bone quality is poor.