• 대한치과보철학회지
• /
• 제34권3호
• /
• pp.501-532
• /
• 1996

This study investigated the effects of cantilever length, location and load condition on stress distribution developed in the implants, prostheses and supporting tissues. The osseointegrated prostheses with two 10mm Branemark implants at 2nd premolar and 1st molar sites with cantilever extensions at 1st premolar, 2nd and 3rd molar sites were constructed. Under 100N, 200N of vertical and $45^{\circ}$ oblique loads at the cantilever pontics, stress distribution patterns and displacement were analyzed with three dimensional finite element method. The results were as follows : 1. The stress was concentrated at the joint of the cantilever pontic and implant superstructure, the neck of implant and the ridge crest near the cantilever But there was little load transfer to the lower supporting tissues of implants. 2. The implant near the cantilever was displaced inferiorly while the implant far from the cantilever was displaced superiorly. In horizontal direction the implants were displaced to the direction where the loads were applied, except the apexes of the implants. 3. In case of anterior cantilever, the stress and displacement were higher than the prosthesis connected with natural tooth. 4. The stress developed in the posterior cantilevered type was higher than in the anterior cantilevered type. The greastest stress was concentrated at the ridge crest near the posterior cantilever. 5. The longer the cantilever, the more the stress was developed and was concentrated at the joint of the cantilever pontic and implant superstructure. 6. Under oblique load, the stress was concentrated at the necks of implants and the ridge crests, but decreased at the joint of the cantilever pontic and implant superstructure than under vertical load.

• 대한치과교정학회지
• /
• 제26권4호
• /
• pp.441-447
• /
• 1996

본 연구는 상악 전돌증을 보이는 환자에게서 상악 제 1 소구치를 발치한 후 견인시 bracket 종류에 따른 치근흡수 차이, 이동양상에 따른 치근 흡수 차이, 각 치아간에 따른 전치부의 치근 흡수 정도를 연구하기 위해 단국 대학교 부속 치과 병원 교정과에 내원한 남녀 환자 32명을 대상으로 연구하여 다음과 같은 결과를 얻었다. 1. 상악 전치 후방 견인시 치근 흡수를 보이지 않는 것은 31.77%, 약간의 흡수는 33.33%, 치근의 1/4이하 흡수는 23.96%, 1/4이상은 10.94%를 보였다. 2. Apical tipping, lingually bodily movement, ant-post apical displacement 의 세가지 이동 양상은, 치근 흡수와의 상관 관계에 유의한 차이를 보이지 않았다. 3. Standard br.을 사용한 환자는 많은 치축 변화를 보이고 치근첨의 이동은 적었으나, straight br.을 사용한 환자는 적은 치축 변화를 보이고 치근첨의 이동량은 많았다. 4. Standard br.과 straight br.의 치근흡수에서 standard br.을 사용한 환자가 더 많은 치근 흡수를 보였다. 5. Standard br.을 사용시 치근 흡수정도는 2>1>3=0순을 보이고, straight br.을 사용시에는 0>1>2>3으로 나타났다.

• 대한치과교정학회지
• /
• 제41권3호
• /
• pp.174-183
• /
• 2011

치근 흡수는 백악질과 상아질의 부분적인 상실로 특징되어지는 상황이며, 치근의 길이 감소를 야기하고 치아의 기능에 심각한 영향을 줄 수 있다. 일반적인 병리적인 치근 흡수와 구별하여 교정치료와 관계된 치근 흡수를 orthodontically induced root resorption (OIRR)이라고 부른다. 이번 연구의 목적은 한국인을 대상으로 하여 교정 치료 후에 나타나는 치근 흡수와 관련된 환자 요인과 교정치료 요인을 찾고, 그 양상에 대해 알아보는 것이다. 판별될 요소들은 발치 치료 여부, 성별, 나이, 치근첨의 변위량과 방향, 총 치료 기간, 치아 길이, 치근의 형태였다. 이번 연구는 단국대학교 치과대학병원 교정과에서 2007년 11월부터 2008년 12월 사이에 포괄적인 교정치료가 종결된 환자의 상악 중절치를 대상으로 하였다. 선정된 대상자 수는 137명이었다. 각각의 기록은 치근단 사진과 측모 두부 방사선사진으로 구성되어졌다. 전체 대상치아에 대한 평균 치근 흡수량은 1.63 mm였으며 표준편차는 1.58 mm였다. 이변량적인 비교에서 발치 치료군에서는 $2.10{\pm}1.64mm$, 비발치 치료군에서는 $1.18{\pm}1.39mm$로 나타났다. 발치 치료 군에서 흡수량이 0.92 mm 컸으며, 통계적으로 유의한 차이를 나타냈다. 초기 치아의 길이가 길수록 흡수량이 컸으며, 4 mm 이상의 심한 치근 흡수를 보이는 그룹에서 blunt, pointed, eroded 형태의 비정상적인 치근 형태의 비율이 높았다. OIRR에 영향을 줄 수 있는 요소로 발치 여부, 초기 치아의 길이, 치근의 형태가 있었다.

• 대한소아치과학회지
• /
• 제36권2호
• /
• pp.293-297
• /
• 2009

외상에 의한 치아의 함입은 치아가 치조골 방향으로 변위되어 있는 상태이다. 함입성 탈구는 다른 유형의 탈구성 손상에 비하여 드물게 발생하고, 낙상에 의한 경우가 많으며, 소녀보다는 소년에서 호발하는 것으로 보고되었다. 치아가 함입되었을 때, 치수괴사나 유착, 치근흡수, 근관폐쇄, 변연골 상실 등과 같은 합병증이 발생할 수 있으며, 치아 경조직과 치아 지지조직 등의 손상이 동반되는 경우가 흔하므로, 예후를 예측하고 정확한 진단 및 치료계획을 수립하는데 어려움이 있다. 함입된 치아의 치료는 자발적으로 재맹출하기를 기다리거나, 교정적 견인 또는 외과적으로 재위치 시키는 방법이 있다. 이 증례는 외상으로 인하여 상악 좌측 중절치가 함입되었다는 주소로 내원한 6세 7개월 된 여아에서, 함입된 치아의 자발적인 맹출을 기대하였으나 맹출이 되지 않아서, 교정적으로 견인하여 맹출시킨 경우로 양호한 결과를 얻었기에 이를 보고하는 바이다.

• 대한소아치과학회지
• /
• 제38권1호
• /
• pp.75-81
• /
• 2011

치배형성기 발육 이상으로 유치열이나 영구치열에서 정상보다 많이 발생하게 된 치아를 과잉치라 한다. 과잉치는 형태에 따라 정상 치아와 형태가 비슷한 보충치(supplementary tooth)와 형태가 다른 흔적치(rudimentary tooth)로 나눌 수 있다. 대부분의 과잉치는 흔적치의 형태를 가지며 보충치는 드물게 나타난다. 보충치는 상악 측절치 부위에서 호발하며 정상 전치와 유사한 형태와 크기를 갖기 때문에 진단시 특별히 주의를 기울여야 한다. 미맹출 과잉치는 상악 전치의 맹출 장애 및 전위, 치간 이개, 치근 흡수, 낭종 형성 등의 합병증을 유발할 수 있으므로 조기에 진단하고 치아 배열 상태 및 치아 발육 단계에 따라 적절한 치료를 시행하는 것이 중요하다. 본 3 증례는 상악 측절치부에 편측 혹은 양측으로 보충치 형태의 과잉치를 갖는 증례로서 맹출 관찰 및 외과적 발거, 교정 치료 및 레진 수복을 통해 치료하였다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제20권3호
• /
• pp.207-213
• /
• 1998

Purpose : This study attempted to relate the incidence of fractures at the mandibular angle with the presence and state of eruption of lower third molars, and to find out the real risk factors for angle fractures in the states of lower third molars. Materials and Methods : Medical records and radiographs of 395 patients with mandibular fractures were retrospectively reviewed. The presence and states of third molars were assessed for each patients and related to the occurrence of angle and other mandibular fractures. Results : Of 395 patients with mandibular fractures, 142 had angle fractures. The incidence of angle fractures was found to be significantly greater when partial erupted lower third molars were present and it had a definite role for risk factors for angle fractures. But there were no clear relationship between the incidence of angle fracrtures and states of without, fully erupted lower third molars. Furthermore, the states of patial and unerupted lower third molar had an effect on bony segment displacement. Conclusions : This study provides clinical evidence to suggest that patial erupted third molar teeth weaken the mandibular angle both quantitatively and qualitatively.

• 대한소아치과학회지
• /
• 제21권2호
• /
• pp.491-495
• /
• 1994

The ectopic eruption is defined rise to be abnormal eruption, which gives to displacement of the teeth and abnormal root resorption of adjacent teeth. The ectopic eruption of first permanent molar is approximately 2-4% of the population, most of them are in the maxilla, rarely in the mandible. In the case of the second permanent molars, most of them are found in the mandible for the reason of the arch length discrepancies and large size of the teeth. The ectopic erupted molars should be treated early in order to coordinate normal growth pattern and to obtain good occlusal support. So, this should be early diagnosed and treated. But, ectopically erupting molars are often self-corrected, hence periodic follow-up is required. The methods of the treatment are largely classified into surgical, surgical-orthodontic, and orthodontic method. Especially in orthodontic method, they are divided as follows; appliances that is positioned at the contact point for unlocking and the distal movement, fixed and removable appliance that is connected to more than one tooth, and occlusion guiding method after disking or extraction of the second deciduous molar. The report presents the good results in treating patients, whose chief complaint was ectopic eruption of mandibular permanent molars.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.103-115
• /
• 1991

This study was executed to analyze the stress distribution of tooth, supporting structure and overdenture by two-dimensional photoelastics when 6 types of coping were inserted. Types of coping were designed to be inclined plane, short dome, medium dome, shore square, medium square and o-p anchor attachment. Fortes were applied respectively as follows: 1) Vertical load of 10 kg on the incisal edge 2) $30^{\circ}$ diagonal load of 8 kg on the labial surface. The results were as follows: 1. In case of short dome and o-p anchor attachment, the stress is evenly distributed on teeth, supporting tissue structure under vertical and $30^{\circ}$ diagonal load, then short dome and o-p anchor attachment show better stress distribution and stabilization of overdenture than any other coping under labial diagonal load. 2. Inclined plane revealed greater tendency of displacement of overdenture than any other coping under labial diagonal load. 3. Long height of copings had greater concentration of stress than short height of copings. 4. In case of medium dome under labial diagonal load, there were high level of stress concentration on denture base contacted labioincisal angle of coping.

• 치과방사선
• /
• 제23권1호
• /
• pp.95-100
• /
• 1993

The author observed a case of osteogenic sarcoma in a 11-year-old female with complaint of painful swelling on face in right side. The observed results were as follows: 1. Large hematoma was obsered, and patient complanited painfull swelling on c/c site. 2. Predisposing factor of osteogenic sarcoma was not clear, but patient had history of extraction before patient visiting infirmary of our dental collage. 3. Serologic findings were not specific, and serum alkaline level was normal. 4. Radiographic findings were as follows: ① Diffuse faint radiopacity in the lesion ② Bony destruction and increased radiopaciy in right antrum ③ Displacement of multiple teeth on involved area(i. e ;＃12, 15. 55, 16, 17, 18), ④, Increased periodontal space in singel tooth(＃13) ⑤Destruction of bony crypt on involved teeth(＃13, 14, 15, 17, 18) ⑥ Loss of lamina dura of three teeth in involved area(＃11, 12, 16) 5. Computed tomographic findings were as follows: ① Large calcific and hetergenous component mass in the Rt. maxillary sinus, and this mass extending to Rt. maxilla, alveolar bone, ethmoid sinus. ②, Soft tissue bulging into Rt. side nasal cavity and oral cavity. ③ Bone destruction of maxillary sinus wall and Rt. alveolar bone.

• 한국정밀공학회지
• /
• 제28권4호
• /
• pp.474-481
• /
• 2011

The purpose of this study was to investigate the effect of rigidity of post core systems on stress distribution by the finite element stress analysis method. Three-dimensional finite element models simulating an endodontically treated maxillary central incisor restored with a zirconia crown were prepared. Each model contained cortical bone, trabecular bone, periodontal ligament, 4mm apical root canal filling, and post-and-core. A 50N static occlusal load was applied to the palatal surface of the crown with a $60^{\circ}$ angle to the long axis of the tooth. And three parallel type post (zirconia, glass fiber and stainless steel) and two core (Paracore and Tetric ceram) materials were evaluated, respectively. The differences in stress transfer characteristics of the models were analyzed. von Mises stresses were chosen for presentation of results and maximum displacement and hydrostatic pressure were also calculated. For the Result of the research, the model applied glass fiber to post material has lowest von Mises stress and it is suitable for material of post core systems.