• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.3
• /
• pp.119-123
• /
• 2015

Objectives: Dentin is composed of many minerals and growth factors. Based on this composition, we studied its effect as a possible regenerative material for alveolar healing. Materials and Methods: This study was conducted using four 2.5-year-old mongrel dogs (male; weight, 25 to 30 kg). The third mandibular premolars were carefully mobilized with a dental elevator and then removed using forceps. The crown portions of the extracted teeth were removed with cutters, and the root portions of the remaining teeth were collectively trimmed as closely as possible to 350 to $500{\mu}m$. Dentin and cementum (DC) chips harvested from the extracted teeth were soaked in blood and packed into the fresh sockets (autograft). Biopsies were performed at the ends of day 14 and day 56 following implantation. Data were expressed as $mean{\pm}standard$ deviation and compared with t-test results. Results: The ratio of $S_A$(bone) to total area of each probe was determined and was $170{\pm}16{\mu}m^2$ for the control group and $71{\pm}14{\mu}m^2$ for the DC group, a significant difference (P <0.05). Conclusion: DC particulate grafts offered no improvement in bone regeneration in alveolar extraction sockets.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.215-221
• /
• 2015

Treating patients with severely worn dentition often requires comprehensive prosthetic treatments. Oral rehabilitation and long-term stability could be achieved by analyzing the cause of the wear and changing vertical dimension. The temporary restoration procedure is executed and patient's adaptation is evaluated by long-term observation when treatment is accompanied with increasing vertical dimension. In this case, 54 year-old male presented with worn dentition and esthetic dissatisfaction. In oral manifestations, severely worn dentition with attrition and erosion is diagnosed. To evaluate change of vertical dimension, interocclusal rest space, facial appearance, pronunciation, clinical crown length, distance from incisor edge to labial vestibule are evaluated. Consequently, 2.5 mm increase of vertical dimension that based on articulator incisal pin is determined. After 8 weeks stabilization period with temporary prostheses, definitive prostheses are fabricated. After 6 months follow up period, satisfactory outcomes were achieved both in functional and esthetic aspects through this procedure.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.67-76
• /
• 2020

With the evolution of the computer-aided design/computer-aided manufacturing (CAD/CAM) technology, the intraoral scanners are playing an increasingly important role, as they are the first step towards a completely digital workflow. The CAD/CAM double scanning technique has been used to transfer the information from provisional restorations to definitive restorations. In this case, a 67-year-old male with esthetically compromised anterior teeth, generalized severe attrition of teeth, and reduced vertical dimension was treated with full mouth rehabilitation including a re-establishment of the lost vertical dimension of occlusion assisted by the crown lengthening procedure. The provisional restorations were fabricated using an intraoral scanner and the CAD/CAM double scanning technique. After the period of adaption, the definitive monolithic zirconia restorations were delivered. The CAD/CAM double scanning technique successfully transferred the occlusal and morphological characteristics, obtained from the provisional restorations, to the definitive restorations.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.1
• /
• pp.10-14
• /
• 2003

Myofibroma is a rare spindle cell neoplasm that consists of myofibroblsasts. Although it was originally described as a multicentric tumor process affecting infants and young children, it is now recognized that most cases of the tumor are soliatary and that it can occur at any age. This case is a myofibroma involving the right mandibular body in a 9-year-old boy. Radiographic examination revealed a relatively well-demarcated radiolucent lesion surrounding the impacted right mandibular canine and first premolar crown. The histologic sections composed of interlacing bundles of spindle cells with tapered or blunt-ended nuclei admixed with a foci of hemangiopericytoma-like appearance. Immunohistochemical staining demonstrated a positive reaction to vimentin and smooth muscle actin, but they are negative for desmin and S-100. The presence of well circumscribed radiolucent solid lesion in children as observed in this case, differential diagnosis of myofibroma must be included. In this case, there was no recurrence 6 months after enucleation and eruption guide of the impacted tooth is ongoing now.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.14 no.1
• /
• pp.31-35
• /
• 2018

Dentinogenesis imperfecta is a hereditary disorder that causes abnormal dentin formation and tooth morphology. Affected teeth show very thin dentin and large pulp chamber. Immediately after their eruption, the teeth tend to be destroyed rapidly. Early dental intervention is recommended to improve the feeding capacity and quality of life for the child, to maintain vertical dimension, and to promote healthy and functional dentition. This case report describes a treatment for a 4-year-2-month-old girl whose primary and permanent dentition were affected by Dentinogenesis Imperfecta. Shell teeth were observed in the entire primary dentition. The pulp of most teeth was exposed and the patient complained of pain. Most paternal family members were transferred to the Dentinogenesis Imperfecta. She needed an extensive dental treatment, but her compliance could not be expected because she was very young and anxious. So we decided to treat her under general anesthesia. All molar teeth are restored with Stainless Steel crown. Maxillary anterior teeth were extracted and mandibular anterior teeth are restored with composite resin. The patient's pain disappeared and masticatory function was restored.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.3
• /
• pp.166-170
• /
• 2012

Calcifying epithelial odontogenic tumor (CEOT) is a rarely reported benign tumor, accounting for 0.4-3% of all odontogenic tumors. Approximately 150 cases have been reported in the literature between 1958 and 2003. The age range of CEOT varies from 8 to 92 years with mean of 36.9 years, and the occurrence of the lesion in both genders is almost equal. It has 2 clinico-topographic variants: the intraosseous (94%) and the extraosseous (6%) type. The intraosseous type has a predilection for mandible (maxilla : mandible ratio of 1 : 2). The intraosseous CEOT commonly associated with non-erupted teeth accounts for more than half (52%) of the cases and usually appears as painless swelling that causes bony expansion. The location of diffused round-shaped calcifying material is inside the connective tissue stroma and epithelial islands. The tumors tend to be located toward the tooth crown, which usually has a unilocular radiolucent region containing variant radiopaque materials radiologically. In this paper, we report a case of CEOT occurring in the left mandibular first premolar of a 23-year-old female and present a brief review of the literature.

• Journal of Periodontal and Implant Science
• /
• v.41 no.3
• /
• pp.109-116
• /
• 2011

Purpose: The purpose of this study was to compare and quantify the expression of C-reactive protein (CRP), matrix metalloproteinase (MMP)-14, and tissue inhibitor of metalioproteinases (TIMP)-2 in gingival tissues of patients with chronic periodontitis accompanied with inflammatory reaction related to alveolar bone resorption with or without type 2 diabetes mellitus (DM). Methods: Twelve patients with type 2 DM and chronic periodontitis (group 3), twelve patients with chronic periodontitis (group 2), and twelve healthy individuals (group 1) were included in the study. Gingival tissue biopsies were collected from each patient and from healthy individuals at the time of periodontal surgery (including surgical crown lengthening) or tooth extraction. The concentrations of cytokines were determined by a western blot analysis. Results: The expression levels of CRP and MMP-14 increased in group 2 and 3, and they were highest in group 3. The expressions of TIMP-2 also increased in group 2 and 3. Conclusions: This study demonstrated that the expression levels of CRP, MMP-14, and TIMP-2 might be inflammatory markers in periodontal inflamed tissue. It can be assumed that CRP, MMP-14, and TIMP-2 may be partly involved in the progression of periodontal inflammation associated to type 2 DM.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.225-232
• /
• 2020

PURPOSE. This study aimed to fabricate provisional crowns at varying build directions using the digital light processing (DLP)-based 3D printing and evaluate the marginal and internal fit of the provisional crowns using the silicone replica technique (SRT). MATERIALS AND METHODS. The prepared resin tooth was scanned and a single crown was designed using computer-aided design (CAD) software. Provisional crowns were printed using a DLP-based 3D printer at 6 directions (120°, 135°, 150°, 180°, 210°, 225°) with 10 crowns in each direction. In total, sixty crowns were printed. To measure the marginal and internal fit, a silicone replica was fabricated and the thickness of the silicone impression material was measured using a digital microscope. Sixteen reference points were set and divided into the following 4 groups: marginal gap (MG), cervical gap (CG), axial gap (AG), and occlusal gap (OG). The measurements were statistically analyzed using one-way ANOVA and Dunnett T3. RESULTS. MG, CG, and OG were significantly different by build angle groups (P<.05). The MG and CG were significantly larger in the 120° group than in other groups. OG was the smallest in the 150° and 180° and the largest in the 120° and 135° groups. CONCLUSION. The marginal and internal fit of the 3D-printed provisional crowns can vary depending on the build angle and the best fit was achieved with build angles of 150° and 180°.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.682-686
• /
• 2005

Incontinentia pigmenti(IP), so called Block-Sulzberger syndrome is a rare genodermatosis that occurs almost in female infant; usually lethal in males, X-linked dominantly inherited disorder. IP is characterized by abnormalities of mesodermal and ectodermal tissues including eye, tooth, skin, nail, breast and hair as well as neurological deficiencies. Dental problems are congenital missing of teeth, delayed eruption, abnormal crown shape and so on. Here is a case of 6 year-old female with IP. She had congenital missing of primary and permanent teeth, delayed eruption, maxillary deficiency and extra cusps, resulting in unstable occlusion. Systemically, she had a history of operating eyes due to problem of retina and hyperpigmented macules on her trunk and extremities as typical character of IP.

• The korean journal of orthodontics
• /
• v.50 no.1
• /
• pp.13-25
• /
• 2020

Objective: The aim of this study was to compare the accuracy and reliability of measurements performed using two different software programs on digital models generated using two types of plaster model scanners (a laser scanner and a computed tomography [CT] scanner). Methods: Thirty plaster models were scanned with a 3Shape laser scanner and with a Flash CT scanner. Two examiners performed measurements on plaster models by using digital calipers and on digital models by using Ortho Analyzer (3Shape) and Digimodel^® (OrthoProof) software programs. Forty-two measurements, including tooth diameter, crown height, overjet, overbite, intercanine and intermolar distances, and sagittal relationship, were obtained. Results: Statistically significant differences were not found between the plaster and digital model measurements (ANOVA); however, some discrepancies were clinically relevant. Plaster and digital model measurements made using the two scanning methods showed high intraclass coefficient correlation values and acceptable 95% limits of agreement in the Bland-Altman analysis. The software used did not influence the accuracy of measurements. Conclusions: Digital models generated from plaster casts by using laser and CT scanning and measured using two different software programs are accurate, and the measurements are reliable. Therefore, both fabrication methods and software could be used interchangeably.