• Journal of the korean academy of Pediatric Dentistry
• /
• v.39 no.1
• /
• pp.43-50
• /
• 2012

The concept of revascularization of necrotic pulps regained interest and became an alternative conservative treatment option for young permanent teeth with immature roots. Revascularization of immature teeth with apical periodontitis depends mainly on disinfection of the canal. Since the infection of the root canal system is considered to be polymicrobial, a combination of drugs would be needed to treat the diverse flora. A triple antibiotic mixture of metronidazole, ciprofloxacin, and minocycline was used as an intracanal medicament. However, discoloration was developed after applying the triple antibiotic mixture. It is believed that the marked discoloration is related to the use of minocycline. The aim of this article was to present cases of coronal discoloration after triple antibiotic therapy in immature tooth and was treated with bleaching technique to control coronal discoloration. In conclusion, revascularization by using triple antibiotics promotes a paradigm shift in treating endodontically involved permanent teeth. However, we should understand that triple antibiotics containing minocycline induces tooth discoloration. Further research to prevent coronal discoloration should be investigated and suggested for the safe use of triple antibiotics.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.45 no.1
• /
• pp.57-64
• /
• 2018

Pre-eruptive intracoronal resorption (PEIR) is a developmental defect in the crown of a pre-eruptive tooth. The purpose of this study was to investigate the relationship between the size of the pre-eruptive buccal pit radiolucency, which is suspected as PEIR on a panoramic radiography, and the need for restoration after the eruption of a mandibular first molar. The experimental group included 35 mandibular first molars, in which lesions requiring definite restoration were observed during eruption. The control group consisted of 64 sound mandibular first molars after eruption. The sex, age, tooth position, tooth formation stage, size of the pre-eruptive buccal pit radiolucency, and restoration methods in the experimental group and control group were examined. Compared with the control group, the experimental group showed a statistically significant difference in the size of the buccal pit before eruption. The buccal pit size for predicting the need for restoration was further examined by receiver operating characteristic curve analyses, and the area under the curve was $0.813{\pm}0.047$. If radiolucency is observed at the buccal pit of the mandibular first molar before eruption, periodic observations and post-eruption examinations are required.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.33 no.2
• /
• pp.253-261
• /
• 2006

Estimating the size of unerupted teeth is an essential aspect of orthodontic diagnosis and treatment planning in the mixed dentition. Several methods were introduced and used for the prediction. The most common methods among these would be Moyers probability chart and Tanaka and Johnston equations. These are currently used widely, but they were developed for Caucasians. Because there are clear racial differences in teeth size, the objectives of this study were to produce correlation coefficients between the combined mesiodistal widths of the permanent mandibular incisors and those of the canines and premolars for each quadrant, and prediction tables with regression equations, specifically for Korean. 178 young adults (70 women, 108 men, mean age 21.63 years) were selected from the College of Dentistry, Yonsei University, Seoul, Korea. The mesiodistal crown diameters of the permanent teeth were measured with calipers. Significant sexual dimorphism was found in tooth sizes. The correlation coefficients between the total mesiodistal width of the mandibular permanent incisors and those of the maxillary and mandibular canines and premolars were found to be between 0.52 and 0.64. The standard error of the estimatation was better (0.60) for women and the ${\gamma}^2$ values ranged from 0.27 to 0.41 for both sexes Prediction tables were prepared for Korean. This study showed larger canine and premolar diameters than Tanaka and Johnston's and Moyers' studies which might be due to the racial differences. Further investigations with a larger sample size will be needed for more representative data on the Korean population.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.392-398
• /
• 1999

The purpose of this study was to assess the effect of catalase used following bleaching for the elimination of hydrogen peroxide residues from human teeth on the microleakage at the tooth-resin composite interface. In this study, class V cavities were prepared on the buccal or lingual surfaces of seventy extracted human molar teeth, and crown of sixty teeth were immersed in 30% hydrogen peroxide at $37^{\circ}C$ for 5 days except for negative control group. Then the teeth were rinsed with water and distributed randomly into seven groups of 10 each and were conditioned as following Negative control group: No bleaching Positive control group : bleaching and no application of catalase (C-40) Experimental group 1 : one cycle of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 2 : two cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 3 : three cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 4 : four cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching Experimental group 5 : five cycles of catalase application for 3 min. and water rinse for 2 min. after bleaching The cavities of each groups were restored with composite resin. The teeth were thermocycled, stained with 2% methylene blue, and sectioned buccolingually. Degree of dye penetration at tooth-restoration interfaces were examined by stereomicroscope(${\times}30$) at occlusal and gingival margin The results were as follows : 1. On the occlusal margin, there was no significant difference in the microleakage between the negative coltrol group and experimental groups (p>0.05). But on the gingival margin, experimental groups showed higher microleakage than the negative coltrol group (p<0.05). 2. On the occlusal margin, positive coltrol group showed higher microleakage than experimental groups (p<0.05) and among the experimental groups, group 1 showed higher microleakage than group 3, 4, 5 (p<0.05). 3. On the gingival margin, there was no significant difference between the positive coltrol group and experimental groups, and between experimental groups (p>0.05). The result indicated that catalase used in bleached cavity for the elimination of hydrogen peroxide residues from human teeth maybe reduced microleakage at the tooth-resin composite interface.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.3
• /
• pp.280-290
• /
• 2021

Color stability of pulp-capping material is considered vital to the final aesthetic result since the material is placed in the coronal area. The purpose of this study was to compare the color stability of various pulp-capping materials by analyzing color change of tooth over time. A cavity was formed in the crown of the extracted premolar, and 4 types of pulp-capping materials were filled. Color assessment was performed with a spectrophotometer at different intervals: before placement; immediately after material placement; 1 day, 1 week, 2 weeks, 4 weeks, 8 weeks, 12 weeks, and 16 weeks after placement. Proroot white MTA^® and TheraCal LC^® showed a significant decrease in the L^* value and an increase in the ∆E^* value over time. In contrast, Biodentine^® and Well-Root^TM PT showed no significant change in the L^* value and maintained a steady ∆E^* value. The application of pulp-capping materials containing bismuth oxide as a radiopacifier may result in a color change of teeth. Long-term color stability of pulp-capping materials should be considered when treating teeth with thin enamel thickness or in aesthetically important area.

• The Journal of Advanced Prosthodontics
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2022

PURPOSE. The maximum width between the mesial and distal labial transitional line angles, described as "esthetic width" herein, could significantly influence the visual perception of the teeth and smile. This study aimed to conduct biometric research on esthetic width and to explore whether regular distribution exists in the esthetic width of human teeth. MATERIALS AND METHODS. A total of 4,264 maxillary and mandibular anterior teeth were measured using the Geomagic studio software program. The proportions of maxillary to mandibular homonymous teeth and proportions between the adjacent teeth were calculated. Bilateral symmetry and the correlation between the esthetic and mesiodistal widths were both accounted for during the measurement procedures. RESULTS. The mean esthetic widths were 6.773 ± 0.518 mm and 4.329 ± 0.331 mm for maxillary and mandibular central incisors, respectively, 5.451 ± 0.487 mm and 5.008 ± 0.351 mm for maxillary and mandibular lateral incisors, respectively, and 3.340 ± 0.353 mm and 5.958 ± 0.415 mm for maxillary and mandibular canines, respectively. Except for the mandibular canines, no significant difference in esthetic width was found among homonymous teeth from the same jaw. A high linear correlation was found between the esthetic and mesiodistal widths of the same tooth, except for the maxillary canines. Esthetic width proportions among different tooth categories showed some regular patterns, which were similar to those of the mesiodistal width. CONCLUSION. Esthetic width is regularly distributed among the teeth in the Chinese population. This could provide an important reference for anterior dental restorations and dimension recovery in esthetic reconstruction of anterior teeth.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.815-824
• /
• 1997

The purpose of this study is to develop the basic algorithm for the finite element method modeling of individual malocclusions. Usually, a great deal of time is spent in preprocessing. To reduce the time required, we developed a standardized procedure for measuring the position of each tooth and a program to automatically preprocess. The following procedures were carried to complete this study. 1. Twenty-eight teeth morphologies were constructed three-dimensionally for the finite element analysis and saved as separate files. 2. Standard brackets were attached so that the FA points coincide with the center of the brackets. 3. The study model of a patient was made. 4. Using the study model, the crown inclination, angulation, and the vertical distance from the tip of a tooth was measured by using specially designed tools. 5. The arch form was determined from a picture of the model with an image processing technique. 6. The measured data were input as a rotational matrix. 7. The program provides an output file containing the necessary information about the three-dimensional position of teeth, which is applicable to several finite element programs commonly used. The program for a basic algorithm was made with Turbo-C and the subsequent outfile was applied to ANSYS. This standardized model measuring procedure and the program reduce the time required, especially for preprocessing and can be applied to other malocclusions easily.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.3
• /
• pp.160-166
• /
• 2013

Purpose: The purpose of this study was to compare the fracture strength of traditional metal-ceramic crowns and full zirconia crowns according to the occlusal thickness. Materials and methods: A mandibular first molar resin tooth was prepared with 1.5 mm occlusal reduction, 1.0 mm rounded shoulder margin and $6^{\circ}$ taperness in the axial wall. Duplicating the resin tooth, 64 metal dies were fabricated. 48 full zirconia crowns were fabricated using Prettau zirconia blanks by ZIRKONZAHN CAD/CAM and classified into six groups according to the occlusal thickness (0.5 mm, 0.6 mm, 0.7 mm, 0.8 mm, 0.9 mm, 1.0 mm). 16 metal-ceramic crowns were fabricated and classified into two groups according to the occlusal porcelain thickness (1.0 mm, 1.5 mm). All crowns were cemented on each metal die and mounted in a universal testing machine. The load was directed at the functional cusp of each specimen until catastrophic failure occurred. One-way ANOVA, Tukey multiple comparison test (${\alpha}=.05$) and t-test (${\alpha}=.05$) were used. Results: The results were as follows. 1. The test 1 group (646.48 N) showed the lowest fracture strength (P<.05), and the value of the test 2.3.4.5 groups (866.40 N, 978.82 N, 1196.82 N, 1222.41 N) increased as thickness increased, but no significant difference were found with the groups (P>.05). The value of test 6 group (1781.24 N) was significantly higher than those of the other groups (P<.05). 2. There were no significant differences of the fracture strength of metal ceramic crowns according to occlusal porcelain thickness 1.0 mm (2515.71 N) and 1.5 mm (3473.31 N) (P<.05). Conclusion: Full zirconia crown needs to be 1.0 mm or over in occlusal thickness for the posterior area to have higher fracture strength than maximum bite force.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.576-583
• /
• 2005

Tooth formation is a complex developmental process that is mediated through a series of reciprocal epithelial-mesenchymal interactions. Several signal pathways and transcription factors have been implicated in regulating molar crown development, but relatively little is known about the regulation of root development. It was reported that NFI-C knockout mice showed abnormal root formation with normal crown. The aims of this study are to elucidate how the NFI-C regulate the determine of root shape and odontoblasts differentiation. We carried out immunohistochemistry using cytokeratin to investigate the role of Hertwig's epithelial root sheath and DSPP mRNA in-situ hybridization to conform the nature of root dentin during root development in NFI-C knockout mice. Cytokeratin reacted with all the HERS cells and the continuity of cytokeratin positive cells between the HERS cells and enamel epithelium was lost in the cervical region both wild and K/O types. After root dentin deposition cytokeratin positive-HERS cells showed irregularity and loss of polarity in the cervical region in K/O type. DSPP mRNA was strongly expressed in odontoblasts of crown and root dentin in wild type mice, whereas expression of DSPP mRNA was restricted in odontoblast of crown dentin in the K/O type. During root formation in NFI-C knockout mice, HERS normally grow out of the crown but fail to induce odontoblast differentiation in root portion. These results suggest that NFI-C may play important roles in odontoblast differentiation during root dentin formation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.119-125
• /
• 2009

Fusion and gemination are irregularities in tooth development. It is often difficult to differentiate between gemination and fusion and it is common to refer to these anomalies as 'double teeth'. The deciduous teeth are most commonly involved, but in 0.1% of cases permanent teeth are affected, in which case aesthetic, funtional and periodontal problems can result. Double teeth present great difficulties in management and required a multidisciplinary approach. The central groove on the labial and palatal surfaces of a double tooth is extremely prone to caries, therefore early 'fissure sealing' is essential. In permanent dentition, surgical separation of fused teeth may be possible with subsequent orthodontic alignment and restorative treatment as needed to reshape the crown. Reshaping or reduction of a double tooth with a single canal may be attempted by modifying the appearance of the labial groove and the use of composite tints but is often impossible and extraction may be the only alternative. Orthodontic treatment and prosthetic replacement is then required. Implants may be an option for adolescents. The present study describes three clinical cases of double teeth in the position of the maxillary permanent incisors. The first case demonstrates an example of multidisciplinary care including surgical intraoral hemisection, root canal therapy, restorative and orthodontic treatment. The second and third cases describe the external and internal morphology of the two fused teeth by means of three dimensional dental computer tomography.