• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.3
• /
• pp.328-342
• /
• 1999

This study was performed to investigate the factors related to tooth wear. For this study, 78 patients with temporomandibular disorders and 76 dental students without any signs and symptoms of temporomandibular disorders were selected as the patients group and as the normal group, respectively. Preferred chewing side, Angle's classification, lateral guidance pattern, head and shoulder posture were observed clinically. Electromyographic activity of anterior temporalis and masseter muscle were recorded with $BioEMG^{(R)}$ and occlusal status were recorded with $T-Scan^{(R)}$. Wear facet area of each tooth was measured from working model of upper arch corresponding to the occlusal status from T-Scan. Wear facet area were measured with planimeter in $mm^2$. Total area were divided into incisal, canine, posterior tooth area. Anterior wearfacet area was incisor area plus canine area, and unilateral area was anterior area plus posterior area. The data collected were analyzed by SAS statistical program and the results of this study were as follows: 1. There was no significant difference between the two groups in total werafacet area, and male subjects showed tendency to have larger area in the normal group but female subjects showed tendency vice versa. 2. There was no significant difference related to preferred chewing side and Angle's classification, however some difference was observed by lateral guidance pattern. Anterior wear facet area in subjects of canine guidance was the largest in the three subgroups. 3. Subjects with head tilting to right side had larger posterior and total area, and subjects with higher shoulder in right side had larger canine and anterior area than any other subgrous. 4. Electromyographic activity of masseter muscle was more correlated with wear facet area than anterior temporalis muscle, and tooth contact number and force were significantly correlated with wear facet area, but the most important factor affecting tooth attrition was age.

• Journal of Oral Medicine and Pain
• /
• v.41 no.3
• /
• pp.85-90
• /
• 2016

Purpose: The aim of this study was to develop an automated software to extract tooth and pulpal area from sectional cone-beam computed tomography (CBCT) images, which can guarantee more reproducible, objective and time-saving way to measure pulp/tooth volume ratio. Methods: The software program was developed using MATLAB (MathWorks). To determine the optimal threshold for the region of interest (ROI) extraction, user interface to adjust the threshold for extraction algorithm was added. Default threshold was determined after several trials to make the outline of extracted ROI fitting to the tooth and pulpal outlines. To test the effect of starting point location selected initially in the pulpal area on the final result, pulp/tooth volume ratio was calculated 5 times with different 5 starting points. Results: Navigation interface is composed of image loading, zoom-in, zoom-out, and move tool. ROI extraction process can be shown by check in the option box. Default threshold is adjusted for the extracted tooth area to cover whole tooth including dentin, cementum, and enamel. Of course, the result can be corrected, if necessary, by the examiner as well as by changing the threshold of density of hard tissue. Extracted tooth and pulp area are reconstructed three-dimensional (3D) and pulp/tooth volume ratio is calculated by voxel counting on reconstructed model. The difference between the pulp/tooth volume ratio results from the 5 different extraction starting points was not significant. Conclusions: In further studies based on a large-scale sample, the most proper threshold to present the most significant relationship between age and pulp/tooth volume ratio and the tooth correlated with age the most will be explored. If the software can be improved to use whole CBCT data set rather than just sectional images and to detect pulp canal in the original 3D images generated by CBCT software itself, it will be more promising in practical uses.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.4
• /
• pp.57-64
• /
• 2018

In this paper, we propose the automatic detection method for individual region separation using panorama image. Finding areas that contain individual teeth is one of the most important tasks in automating 3D models through individual tooth separation. In the conventional method, the maxillary and mandibular teeth regions are separated using a straight line or a specific CT slide, and the tooth regions are separated using a straight line in the vertical direction. In the conventional method, since the teeth are arranged in a curved shape, there is a problem that each tooth region is incorrectly detected in order to generate an accurate tooth region. This is a major obstacle to automating the creation of individual tooth models. In this study, we propose a method to find the correct tooth curve by using the jawbone curve which is very similar to the tooth curve in order to overcome the problem of finding the area containing the existing tooth. We have proposed a new method to accurately set individual tooth regions using the feature that individual teeth are arranged in a direction similar to the normal direction of the tooth alignment curve. In the proposed method, the maxillary and mandibular teeth can be more precisely separated than the conventional method, and the area including the individual teeth can be accurately set. Experiments using real dental CT images demonstrate the superiority of the proposed method.

• Journal of Korean Dental Science
• /
• v.5 no.1
• /
• pp.37-44
• /
• 2012

Purpose: Among the facilitation of tooth movement in adult orthodontic treatment methods, surgical approaches are gaining popularity but complications following mechanical bone reduction are a problem. In this study, tooth movement was observed after alveolar bone was chemically demineralized to verify whether tooth movement had been facilitated. Materials and Methods: Twelve rabbits were used. In the experimental group, the alveolar bone of the left first molar area was exposed and demineralized. Thirty seven percents phosphoric acid was applied for 5 minutes for demineralization. The opposite first molar area was used as control. Two teeth were pulled with 200 g force and 4 rabbits each were sacrificed at 3, 7, and 14 days after the force was applied. Histologic examination was done with hematoxylin and eosin and tartrate-resistant acid phosphatase staining. Result: The histologic examination results revealed more bone resorption in the demineralized area. As time passed, the number of osteoclasts increased in the compressed area. The amount of tooth movement was larger in the experimental group compared to the control group but the difference was not statistically significant. Conclusion: The demineralization with etchant resulted in limited bone resorption, more tooth movement and less damage of the cementum after applied orthodontic force.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.165-177
• /
• 1994

To investigate the depth of the root concavity and root surface area of the maxillary first premolar, 40 maxillary first premolars were used. All the teeth which extracted because of advanced periodontal disease and orthodontic treatment procedure, were sectioned every 1.5mm from cementoenameljunction to the apex with hard tissue microtome. Each sectioned root was taken photograph with slide film, and projected for measuring with a calibrated digital Curvi-Meter. The root surface area, percentage of the RSA and the linear variation of the RSA were calibrated for each 1.5mm section. Linear variation of the depth of root concavity was measured on mesial and distal root surface for each section using computer-aided digitizer. The results were as follows. 1. The total mean root length of maxillary first premolar was 13.48mm. Mean buccal root length of 2-rooted tooth was 12.59mm, mean palatal root length was 12.73mm, and mean root length of single rooted tooth was 13.78mm. 2. The total mean root surface area of maxillary first premolar was $194.17mm^2$, mean root surface area for 2-rooted tooth was $205.97mm^2$ and mean root surface area for single rooted tooth was $188.49mm^2$. 3. It was 59.93% of the total root surface area that the area from CEJ to coronal 6mm. And, the coronal half of the root length accounted for approximately 71.76% of the total root surface area. 4. Most deepest concavity of the mesial root surface was 0.65mm at apical 3.0mm, 4.5mm level in maxillary first premolar. And, that of the distal root surface was 0.37mm at apical 4.5mm level. 5. All of the maxillary first premolar had mesial root surface concavity. This mesial root surface concavity appeared to be more pronounced in 2-rooted tooth than single rooted tooth.

• The Journal of Korean Academy of Prosthodontics
• /
• v.13 no.1
• /
• pp.11-22
• /
• 1975

This study is to determine the severity and direction of the movement of the adjacent tooth into the created space by tooth or teeth loss. The random samples 387 cases (upper; 121 cases, lower; 266 cases) were selected with surveying record under some criteria. Edentulous area is grouped into the free end type and the tooth borne type. The following results were obtained. In the tooth borne type, slight distal movement of the adjacent tooth into the edentulous space was obtained. And the tooth distal to the edentulous space moved into the space in proportion to the duration of the edentulous state. Elongation of the opposing tooth of the free end type was more severe than that of the tooth borne type. And no inter-relationship between the severity of the elongation and the duration of the edentulous state In general, adjacent teeth had normal and mesial inclination. Lower teeth migrated mesially and lingually (especially in the distal tooth to the edentulous space in the tooth borne type). Upper adjacent teeth usually moved into the normal direction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.38 no.1
• /
• pp.59-72
• /
• 2000

This study was performed to investigate the effects of tooth mobility and design of the direct retainer on the stress of supporting tissues in distal extension removable partial denture. Tooth mobility was simulated and four different types of direct retainer such as Alters clasp, I-bar clasp, wrought wire clasp, and Dalbo attachment were designed and stress on the support-ing tissues were measured and analyzed with straingauge method. The following conclusions were drawn from this study. 1. The stress revealed at the lingual side of alveolar bone of the abutment tooth in edentulous area was the largest. 2. The stress at the lingual side of alveolar bone of the abutment tooth in edentulous area was increased according to the increase of tooth mobility in I-bar clasp and Dalbo attachment. 3. The stress at the residual ridge crest was the great in Dalbo attachment on mobility 0, in I-bar clasp on mobility 1, and in wrought wire clasp on mobility 2. 4. There was little changes of stress according to the increase of tooth mobility at buccal and lingual side of the residual ridge crest and around the abutment teeth in dentulous area.

• Journal of TMJ Balancing Medicine
• /
• v.9 no.1
• /
• pp.4-11
• /
• 2019

Objectives: Although intraoral balancing appliance therapy has been used effective to several diseases, verification studies through cerebral diseases are poorly reported so far. Thus we investigated the effect of tooth-cut induced dental malocclusion against mouse model of ischemic stroke. Methods: Tooth-cut and 90 min middle cerebral artery occlusion (MCAO) were loaded to C57BL/6 male mice, and total infarct area, neurological deficit scores (NDS), histological change of hippocampal region were observed. Production levels of reactive oxygen species (ROS) and inducible nitric oxide synthase (iNOS) in cerebral tissue were also measured. Results: The longer the tooth-cut period, the greater the area of cerebral infarction caused by MCAO, and NDS began to increase as the tooth was cut, and the results were more negative when MCAO was loaded. Histological change of hippocampal cells was significant when tooth-cut was maintained for 7 days. Those damages were thought to depend on the generation of ROS and iNOS in brain tissue. Conclusions: Since tooth-cut increased total area of cerebral infarction due to MCAO in mice, it is able to be confirmed that anomaly of the temporomandibular occlusion can affect neurological diseases.

• Journal of the korean Society of Automotive Engineers
• /
• v.3 no.2
• /
• pp.27-33
• /
• 1981

In the paper, it was attempted to verify how the strength around fillet area of shifted gear would be affected by variables such as number of teeth, shifted value, and diametral pitch. Thereafter, the Lewis' tooth factor of the shifted gear was computed in terms of previously mentioned variables in order to observe the characteristics of stress change related from tooth factor and tooth number with the parameter of shifted values and diametral pitches. From the results of quasi-theoretical values by Finite Element Method(F.E.M.)and experimental values through the photo-elastic tests, the followings were identified. The more the number of gear teeth increased, the more the profile of the tooth became close to that of rack, and accordingly the stresses in the fillet area decreased significantly in certain range. Furthermore, as the shifted value and pressure angle increase the stresses tend decrease. Moreover, the stresses analyzed by F.E.M. in the filled area became around 1.22 times larger than the stresses computed by Lewis' form factor, and this is supposed as on influence of the stress concentration in fillet area.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.24 no.1
• /
• pp.129-135
• /
• 1994

This study was performed to evaluate the accuracy of orthopantomogram by measuring the actual and radiographic tooth length and by analyzing the vertical magnification rate. For this study, total 90 teeth of the maxilla and mandible teeth and a dry skull were used. This experiment was attached with metal balls of 1±0.02㎜ at the root and the crown cusp tips of central, 2nd premolar, 1st molar of the maxilla and mandible and the teeth were embedded in dry skull, and then orthopantomogram was taken. The obtained results were as follows: 1. The average of tooth length in orthopantomogram was longer than that of actual tooth length. 2. The average of vertical magnification rate in the orthopantomogram to actual tooth length was 17-26%. 3. Vertical magnification rate of the maxilla teeth was 18-26% and that of mandibular teeth was 17-23%, and the magnification of maxillary teeth was larger than that of mandible teeth(P<0.0l). 4. Vertical magnification rate of posterior area was 22-26% and that of anterior area was 17-18%, and the magnification of anterior area was less than that of posterior area(P<0.01).