• The korean journal of orthodontics
• /
• v.31 no.3 s.86
• /
• pp.325-333
• /
• 2001

Optimal orthodontic treatment could be possible when a orthodontist can predict and control tooth movement by applying a planned force system to the dentition. The moment to force(M/F) ratio at the bracket, has been shown to be a primary determinate of the pattern of tooth movement. As various n/F ratios are applied to the bracket on the tooth crown, strain distribution in periodontium can be changed, and the center of rotation in tooth movement can be determined. It is, therefore, so important in clinicalorthodontics to know the strain distribution in a force system of a M/F ratio. The purpose of this study was to analyze the strain distribution in orthodontic force system by strain gauge attached to tooth root, and to evaluate the usage of the method. For this study, an experimental upper anterior arch model was constructed, where upper central incisors, on the root surface of which, 8 strain gauges were attached, were implanted In the photoelastic resin, as in the case of 4mm midline diastema. Three types of closing of upper midline diastema closure were compared : 1. with elastomeric chain(100g force) in no arch wire, 2. elastomeric chain in .016“ round steel wire, 3. elastomeric chain in .016”x.022“ rectangular steel wire. The results were as follows. 1. Strain distributions on labial, lingual, mesial and distal root surface of tooth were able to be evaluated with the strain gauge method, and the patterns of tooth rotation were understood by presuming the location of moment arm. 2. Extrusion and tipping movement of tooth was seen in closing in no arch wire, and intrusion and bodily movement was seen with steel arch wire inserted.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.509-515
• /
• 2008

It is widely believed that the increase in the prevalence of dental erosion is due to soft drinks. The purpose of this study was to assess the influence of soft drinks and etchant on the erosion of tooth enamel and the effect of tooth brushing on the abrasion of eroded enamel, and the effect of milk, saliva and Tooth $Mousse^{(R)}$ on the remineralization. The changes in tooth enamel surface were observed by scanning electron microscophy. The results were as follows; 1. The pH of Coca-Cola and Chilsung-Cider were higher than the pH of FineEtch 37 and $Tyrian^{TM}SPE$. 2. The SEM photos revealed that the pattern of the surface eroded by Coca-Cola and Chilsung-Cider were more obvious than that eroded by etchants. 3. The results of remineralization by saliva, milk, Tooth $Mousse^{(R)}$ were not different from each other. 4. The remineralization by saliva decreased tooth brushing abrasion.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.1
• /
• pp.38-45
• /
• 2009

The aim of this study was to examine efficacy of the commercially available 10% CPP-ACP cream (Tooth mousse, GC Co., Japan) and/or 0.05% NaF solution on the remineralization of artifical caries-like lesion in the bovine teeth enamel. Sixty bovine teeth were embedded in orthodontic resin and flattened. The enamel surface in 3 mm diameter was exposed with nail varnish. Specimens were stored in demineralizing solution and divided 5 groups; Group 1 (No treatment), 2 (0.05% NaF solution 1 min), 3 (Tooth mousse 3 min), 4 (After 0.05% NaF solution, Tooth mousse treatment), and 5 (After Tooth mousse treatment, soaking in 0.05% NaF solution during 1 min). After treatment by groups, all specimens was stored in artificial saliva for 30 min. After the process described as above was performed during 10 days without pH cycling, surface hardness (Vickers Hardness Number, VHN) was tested and analyzed by paired t-test and one-way ANOVA test with SPSS 14.0. In intragroup comparison between surface hardness of pre and post-treatment, group 3, 4, 5 showed statistically significant increase (P < 0.05). In intergroup comparison among surface hardness increase of all groups, difference of group 5 between pre and post-treatment ($15.80{\pm}12.21$) was the highest, and followed by group 4 ($14.27{\pm}11.73$), 3 ($4.05{\pm}5.18$), 2 ($1.15{\pm}6.83$), 1 ($0.78{\pm}6.21$). Tooth mousse can be a good alternative agent for the fluoride, and the combination use with fluoride might have the additional anticariogenic effect.

• The korean journal of orthodontics
• /
• v.19 no.2
• /
• pp.25-34
• /
• 1989

This experiment was performed to study the effect of prostaglandin $E_2$ on tooth movement and root resorption in orthodontically treated cats. Twenty five cats were divided into five groups and closed coil springs delivered 80gm were stretched between upper canine and 3rd premolar. $10{\mu}g$ of $PGE_2$ was injected locally in the submucosal area of the upper right canine, while the left side served as a control and was injected saline 0.1ml. The distance between canine tip and central cusp tip of the 3rd premolar was measured. Scanning electron photomicrographs were made of the coronal half of the distal root surface of canines and cemental craterings were observed and quantified using point-counting volumetry. Data were analyzed by 2-way ANOVA and paired t-test. The results were as follows: 1. The rate of tooth movement of the $PGE_2$ side was increased, particularly at 1 day, compared with the control side. 2. The rate of tooth movement was minimum from 7 days to 10 days. 3. The resorption of root surface of the $PGE_2$ side was decreased from 4 days to 10 days, compared with the control side.

• The Journal of the Korean dental association
• /
• v.22 no.11 s.186
• /
• pp.961-971
• /
• 1984

The purpose of this study was designed to evaluate the existence of the junctional epithelia on the tooth surface in periodontal pocket, and what were the morphologic differences between the junctional epithelia on the healthy and advanced periodontitis tooth. Fifteen premolar teeth from patients of Yon Sei University, Dental Infirmary were selected for this study. After extration, the teeth were prepared and examined in Scanning electro microscope. The results were as follows. 1. The junctional epithelia from healthy tooth surface were irreguraly round, oval, polygonal and slightly elongated while those from periodontal pocket were so elongated that difficult to distinguished the individual cell boundary. 2. There were a lot of round space so called 'HOLE or WHORL' which seemed tunnel in periodontal pocket with advanced periodontitis. 3. Microvilli were going to destructed and disappeared on surfaces of junctional epithelia in periodontal pocket with advanced periodontitis. 4. There were a lot of Filopodia on Junctional epithelia from healthy surfaces. %. Junctional epithelia from periodontal pocket with advanced periodontitis contained more inflammatory cells than healthy junctional epithelia did.

• The Journal of the Korean dental association
• /
• v.48 no.4
• /
• pp.297-307
• /
• 2010

Noncarious cervical lesions(NCCLs) are characterized as structural defects found on the tooth surface of the cement-enamel junction. Loss of tooth structure through noncarious mechanisms may vary in etiology and clinical presentation for each individual but presently many clinician now classify this as tooth failure of abfraction due to the stress applied in the cervical area of the tooth under oral physiological and pathological loads. In the current study, we investigated the stress distribution of maxillary premolar with NCCL using simulated 3D finite element analysis. The results were as follows: 1. In the sound maxillary premolar, the stresses were highly concentrated at cervical enamel surface of the mesiobuccal line angle, asymmetrically. 2. Once the lesion has been formed, the highest stress concentration was observed around the apex of the wedge shaped lesion. 3. In four types of NCCL, the patterns of stress distribution were similar and the peak stress was observed at mesial corner and also stresses concentrated at lesion apex. 4. Lesion cavity modification of rounding apex, reduced stress of lesion apex. 5. When restoring the notch-shaped lesion, material with high elastic modulus worked well at the lesion apex and material with low elastic modulus worked well at the cervical cavosurface margin.

• The Journal of the Korean dental association
• /
• v.56 no.6
• /
• pp.314-322
• /
• 2018

Among developmental anomalies of tooth shape, fusion and gemination are comparatively common. Developed with different etiologies, both fusion and gemination show similar clinical features. Therefore, many clinicians have difficulty diagnosing those morpho-anatomic anomalies. The purpose of this study is to report malformed right maxillary first molar in a 20-year-old female. With the aid of computed tomography (CT), the tooth was diagnosed as fusion with supernumerary tooth and dental caries lesion was detected. After performing direct pulp capping, the tooth was permanently restored with microhybrid composite resin using direct method to alter union groove into smooth surface for improving oral hygiene management. Until 6 months of follow-up visits, patient's chief complaint was resolved and tooth is still vital. In conclusion, identifying exact anatomy, conservative treatment and improving oral hygiene are essential in managing unusual morphologic anomalies of tooth.

• The Journal of the Korean dental association
• /
• v.49 no.5
• /
• pp.265-278
• /
• 2011

The introduction of zirconia-based materials to the dental field broadened the design and application limits of, all-ceramic restorations. Most ceramic restorations are adhesively luted to the prepared tooth, however, resin bonding to zirconia components is less reliable than those to other dental ceramic systems. It is important for high retention, prevention of microleakage, and increased fracture resistance, that bonding techniques be improved for zirconia systems. Strong resin bonding relies on micromechanical interlocking and adhesive chemical bonding to the ceramic surface, requiring surface roughening for mechanical bonding and surface activation for chemical adhesion. In many cases, high strength ceramic restorations do not require adhesive bonding to tooth structure and can be placed using conventional cements which rely only on micromechanical retention. However, resin bonding is desirable in some clinical situations. In addition, it is likely that strong chemical adhesion would lead to enhanced long-term fracture and fatigue resistance in the oral environment.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.23 no.2
• /
• pp.58-69
• /
• 2014

In case of esthetic restorative procedure with zirconia restoration, we have to use resin cement because of not only just for retention but also esthetic reason. In such a clinical situation, we have to consider two bonding interfaces, one is tooth surface to resin cement and the other is zirconia surface to resin cement. There is well established bonding protocol between tooth surface to resin cement, but bonding protocol of zirconia surface to resin cement is still controversial. In scientific point of view, there are two mechanism for bonding of zirconia restoration.. One is mechanical retention and the other is chemical adhesion. However, we have three different options for bonding of zirconia restoration in clinical situation; 1) Tribo-chemical coating with silica and silane coupling agent 2) Zirconia primer with phosphate chemistry 3) Self-adhesive resin cement with phosphate chemistry.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.315-319
• /
• 1999

This paper has been considered on the cutting characteristics such as chip formation and surface roughness for Inconel 690 alloy with difficult-to-cut because of high toughness and strength. We have made efforts solving the problem to difficult-to-cut of Inconel by improvement of tool with TiN coating and the selection of optimum cutting condition. We used the CCD camera and the surface roughness tester to observe the chip formation and the state of machined surface by using the improved tool with diamond coating and various cutting condions. We have found that the chip formation showed the tooth shape of tooth blade and the surface roughness was very poor. but it can be better by selection of optimum cutting condition.