• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.1
• /
• pp.26-32
• /
• 2005

A tooth impaction means a state that a tooth does not erupt out of oral mucosa or alveolar bone for many reasons. The reasons for an impaction of the Maxillary central incisor are an odontoma, supernumerary tooth, space loss, prolonged remaining or early loss of a preceding deciduous tooth, abnormalities of crown or root caused by trauma of a deciduous tooth and an ectopic position of a tooth germ. In the case of the impacted maxillary incisor, a rapid mesial movement of a lateral incisor leads a space loss and a midline deviation can be happened. Furthermore, it can cause a cyst. When we treated a patient with an impacted central incisor early, we could see a better prognosis. It means an early diagnosis and an exact treatment are very important. Generally if the impaction is not severe or it is caused by a keratinized covering tissue, a surgical exposure can induce an eruption easily but an orthodontic force is recommended when an eruption does not happen after a surgical method, when the eruption path is too transpositioned to be corrected spontaneously and when an impacted tooth is located so deeply. In the treatment using an orthodontic force, careful considerations about a root length, pulp, and a periodontal tissue can improve the periodontal and esthetic prognosis for the long follow-up results. This case is using an orthodontic traction following a periodic observation and in no expectation of spontaneous eruption. After treatment of this case, I have got some knowledges, so I report this case.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.1
• /
• pp.115-121
• /
• 2021

Dilacerations generally involve central incisors; most often maxillary incisors rather than their mandibular counterparts. The clinical features of dilaceration include non-eruption of the responsible tooth or prolonged retention of the deciduous predecessor tooth. In Case 1, the tooth showed a dilaceration at the boundary between the crown and the root, more laterally rather than labiolingually. In Case 2, the dilacerated tooth showed a crown dilaceration with a relatively normal orientation of the dental root. In both cases, no significant space losses for eruption were observed. Moreover, it seems that unlike the maxilla with the palate, the mandibular anterior teeth are limited to show severe displacement. From these cases, it is suggested that if a mandibular permanent incisor shows a crown dilaceration or lateral dilaceration at the boundary between the crown and the root, there is a relatively high probability of spontaneous eruption of the dilacerated tooth.

• The Journal of the Korean dental association
• /
• v.44 no.2 s.441
• /
• pp.123-132
• /
• 2006

Patients who have impacted tooth are found commonly in orthodontic treatment. Although it is difficult to find the cause of impacted teeth, the most common, causes are prolonged retention of the deciduous teeth, trauma, aberrant sequence of eruption, lack of space and deficiency of Vitamin D. Impacted teeth may lead to esthetic and functional problems and root resorption of adjacent teeth, so we should treat it as soon as possible. Commonly used treatment method is the following: After surgically uncovering of the impacted teeth, a bond of orthodontic appliance is established, and orthodontic traction is started with a removable or fixed appliance. We used the modified lingual arch with a soldered auxiliary appliance in lingual arch for traction of lower impacted teeth. The modified lingual arch could control the magnitude and direction of the applied force with one-arch treatment, and also could give continuous force to impacted tooth without patient patient cooperation. We achieved good results with the modified lingual arch.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.25-32
• /
• 2010

A geortor type pump is widely used in lubrication and actuator systems. Especially the pump is an essential machine element of an automotive engine to feed lubrication oil and power source of automatic transmission. A gerotor is a planar mechanism consist of a pair of rotor and circular tooth of stator assembly which forms a closed space. However, related industries do not have necessary technology to design and optimize the pump and paid royalties of gerotor profile on an advanced company. Also, gerotor profiles with setting design parameter have not been sufficiently analyzed from a theoretical view. Therefore, it is very difficult for designer to decide the specifications of the gerotor profiles, and calculation and fluctuation of flow rate is not yet confirmed. In this study, theoretical analyses and optimal design of the gerotor profiles have been performed numerical method by mathematical base. An automated design system of the tooth profile has been developed through MATLAB GUI Program considering various design parameters.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.2
• /
• pp.52-60
• /
• 2011

Korea is the best country for ship-building. But nowadays, the speedboat and yacht are not mostly developed yet. For the sleek lines of ship, more innovative transmission system should be obtained in the ship industry. In general, marine transmissions often use the straight shafts and the helical gears. So it makes problem that engine-room requires large space. In this case, conical gear is the best solution for this. Until now, technology of conical gear is not generalized, but it will be increased more through many applications. So, in order to get conical gear design technology by ourselves, this thesis is conducted. This paper was written to gain useful information of marine gearbox design applied conical gear through the measurement of backlash, computer analysis and tooth contact test of helical conical involute gear pairs.

• Journal of Korean Dental Science
• /
• v.14 no.1
• /
• pp.40-45
• /
• 2021

During orthodontic treatment of impacted teeth, use of appropriate anchorage against the traction force is important. Tooth anchorage with multi-bracket appliances is commonly used but sometimes it causes unwanted movements of adjacent teeth. Skeletal anchorage devices are therefore considered to minimize such side effects. Still their survival rate and positioning are highly limited according to the bone density and the interradicular space. This case report presents a case of two impacted teeth, one of which is dilacerated and horizontally angulated. Using the microplate with short screws and a bendable neck, negative effects on adjacent teeth were minimized and impacted teeth were repositioned with good stability.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.38 no.3
• /
• pp.303-308
• /
• 2011

Tooth impaction refers to situations in which the eruption is inhibited by some physical barriers in eruptive path and the tooth remains unerupted beyond the normal time of eruption. The etiology of impacted tooth is controversial, but ankylosis has been suggested probably as a leading role. Impacted primary molars may cause several problems such as space loss, tipping of adjacent teeth, supra-eruption of the antagonists, dislocation of succeeding premolar, cystic change and infection. As one of conventional treatments of impacted primary molars, early tooth extraction or surgical extraction following space regaining when there is space loss has been suggested. However, when they are in normal formation and not ankylosed, orthodontic traction following surgical exposure can be the choice of treatment. In this case, a 3-year-old boy was referred to the department of pediatric dentistry for the unerupted mandibular right second primary molar. After surgical removal of gingiva on the occlusal surface, orthodontic traction was performed. After treatment, we could get normal alignment of primary teeth and the opportunity for normal development of permanent teeth.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.27 no.3
• /
• pp.394-399
• /
• 2000

Odontoma is defined as a benign odontogenic tumor containing enmel, dentin as well as cementum. It has come to mean a growth in which both the epithelial and the mesenchymal cells exhibit complete differentiation. Most authorities accept the view today that the odontoma represents a hamartomatous malformation rather than a true neoplasm. The etiology of odontomas is uncertain but hypothesized to involve local trauma, infection, inheritance or mutant gene. The odontomas often cause various disturbances in the eruption and position of the teeth. The steps in removal of an odontoma in close relation to an adjacent impacted normal tooth should comprise 1) removal of odontoma and 2) exposure of the impacted tooth. Orthodontic therapy may be applied. Before treatment, the necessary space for the impacted tooth should be evaluated. If there is lack of space in the dental arch, orthodontic treatment should be carried out before operation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.109-116
• /
• 2010

Impaction is defined as a cessation of the eruption of a tooth caused by a clinically or radiographically detectable physical barrier in the eruption path or by an ectopic position of the tooth. The reasons for impaction of the maxillary central incisor are supernumerary tooth, odontoma, ectopic position of tooth germ, dilacerated tooth and so force. Impacted tooth cause space loss due to proximal movement of adjacent tooth, malocclusion, root resorption of adjacent tooth, cyst formation, so careful observation and early detection is important and exact treatment should be applied to prevent these results. The treatment options of impacted tooth include induction an eruption through extraction of deciduous tooth or surgical exposure, reposition of impacted tooth by surgical method or orthodontic treatment. Orthodontic traction is recommended when an eruption does not happen after removal of barrier or surgical exposure, when eruption path is too transpositioned to be corrected spontaneously so eruption does not expected. In these cases, traction of impacted maxillary central incisor was carried out using orthodontic method with closed eruption technique and it showed good clinical results so we report these cases.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.455-462
• /
• 2010

Patients often seek rehabilitative treatment for severely worn dentition. The etiology of noncarious tooth wear due to attrition, abrasion, and erosion is multifactorial. To treat the worn dentition, it is important to identify and eliminate and/or control the factors that contribute to excessive wear. Many situations requiring complete mouth rehabilitation present with the challenge of a lack of restorative space. To establish a correct occlusal plane and space for prostheses, it is necessary to increase vertical dimension. This may require an increase in occlusal vertical dimension. Also clinicians should be able to choose the appropriate restorative materials to achieve excellence in natural esthetics as well as proper biomechanics and durability. This article presents a method for altering occlusal vertical dimension to restore dentitions with limited restorative space due to loss of tooth structure.