• Restorative Dentistry and Endodontics
• /
• 제39권3호
• /
• pp.230-234
• /
• 2014

This study describes the treatment of an immature permanent tooth with periapical lesion which was treated with regenerative approach using platelet rich plasma (PRP). The root canal of immature human permanent tooth with periapical lesion was gently debrided of necrotic tissue and disinfected with 2.5% NaOCl, and then medicated with triple antibiotic paste comprised of ciprofloxacin, metronidazole, and tetracycline. When the tooth was asymptomatic, PRP and mineral trioxide aggregate (MTA) were placed into the root canal. Six months after PRP treatment, radiographical examination revealed resolution of the radiolucency and progressive thickening of the root wall and apical closure. Our findings suggest that PRP can be used for the treatment of immature permanent teeth with periapical lesion, as part of a regenerative endodontic treatment procedure.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 춘계학술대회
• /
• pp.247-251
• /
• 2001

;A dental developmental anomaly is defined as an isolated aberration in tooth form, caused by a disturbance or abnormality which occurred during tooth development. There are numerous types of dental anomalies, and a considerable variation in the extent of the defects occurs with each type. Teeth with these anomalies pose unique challenges. Since the defects are not always apparent clinically, they can confuse diagnosticians investigating the etiology of pulpal pathosis. When endodontic treatment is required, the defects often hinder access cavity preparation and canal instrumentation. Treatment planning also becomes more challenging, since the defects can create complicated periodontal problems, and the malformed teeth can be difficult to restore, particularly those weakened by endodontic therapy. Fusion is defined as the joining of two developing tooth germs resulting in a single large tooth structure. The incidence of fusion is < 1% in the Caucasian population, and it is believed that physical force or pressure produces contact of the developing teeth. Clinically and radiographically, a fused tooth usually appears as one large crown with at least partially separated roots and root canals. There may be a vertical groove in the tooth crown delineating the originally separate crowns. Dens invaginatus is a deep surface invagination of the crown or root that is lined by enamel. Teeth in both maxillary and mandibular arches may be affected, but the permanent maxillary lateral incisor is the tooth most commonly involved. Studies have revealed an incidence ranging from 0.25% to as high as 10%. The invagination ranges from a slight pitting to an anomaly occupying most of the crown and root. The invagination frequently communicates with the oral cavity, allowing the entry of irritants and microorganism either directly into pulpal tissues or into an area that is deparated from pulpal tissues by only a thin layer of enamel and dentin. This continuous ingress of irritants and the subsequent inflammation usually lead to necrosis of the adjacent pulp tissue and then to periapical or periodontal abscesses. If the invagination extends from the crown to the periradicular tissue and has no communication with the root canal system, the pulp may remain vital. Recommended treatment of fused tooth and dens invaginatus has been reported in the endodontic literature. This case report describes the endodontic treatment of a maxillary laterl incisors having fused crown and dens invaginatus.natus.

• Imaging Science in Dentistry
• /
• 제44권3호
• /
• pp.221-227
• /
• 2014

Purpose: This study aimed to investigate the clinical anatomy of lower premolar roots in a Spanish population by using cone-beam computed tomography (CBCT), correlating findings with patient gender and tooth type. Materials and Methods: Using 70 CBCT images, we evaluated 126 healthy, untreated, well-developed lower premolars. The number and morphology of roots and root canals, and the foramina number were assessed. Results for gender and tooth type were compared using the chi-squared and ANOVA tests. Results: The average length of teeth and roots was significantly higher in men (p=0.00). All 126 premolars had a single root. One canal was found in 83.3% of the premolars, with no gender or tooth type differences; Vertucci configuration types I and V were the most prevalent. The first premolars showed significantly greater variability than the second premolars (p=0.03). A single apical foramen was found in 89.7% of the premolars, with no differences by tooth type. Women had a significantly higher prevalence of two apical foramina than men (p=0.04). Some degree of curvature was observed in 65% of the premolars, with no differences by gender or tooth type. A root angle of more than $20^{\circ}$ was found in 12.98% of the premolars, without any differences by gender or tooth. Conclusion: All premolars were single-rooted. One canal had the most prevalent morphology. More variability in canal anatomy was found in the first premolars. Curvatures greater than $20^{\circ}$ were found at less than 5 mm from the apex.

• Restorative Dentistry and Endodontics
• /
• 제44권4호
• /
• pp.35.1-35.10
• /
• 2019

Pulp revascularization is an alternative treatment in immature traumatized teeth with necrotic pulp. However, this procedure has not been reported in horizontal root fractures. This is a case report of a 9-year-old patient with multiple horizontal root fractures in 2 upper central incisors that were successfully treated with pulp revascularization. The patient presented for treatment 2 years after the initial trauma, and revascularization was attempted after the initial treatment with calcium hydroxide had failed. Prior to pulp revascularization, cone-beam computed tomography and autoradiograms demonstrated multiple horizontal fractures in the middle and apical thirds of the roots of the 2 affected teeth. Revascularization was performed in both teeth; platelet-rich plasma (PRP) was used in one tooth (#11) and the conventional method (blood clot) was used in the other tooth (#21). Clinical and radiographic follow-up over 4 years demonstrated pulp calcification in the PRP-treated tooth. Neither of the 2 teeth were lost, and the root canal calcification of tooth #11 was greater than that of tooth #21. This case suggests that PRP-based pulp revascularization may be an alternative for horizontal root fractures.

• 대한치과보철학회지
• /
• 제23권1호
• /
• pp.13-37
• /
• 1985

Biocompatibility of dense synthetic hydroxylapatite is well known and the direct bond with adjacent bone developed. The purpose of this study was to evaluate the potential of clinical application of tooth ash for preservation of alveolar ridge. For this purpose the author performed an experimental implantation of the particulate and root form of both pure dense hydroxylapatite and tooth ash in alveolar sockets immediately after extraction. The pure dense hydroxylapatite was particulate form and root form made by Calciteck Inc. The tooth ash was prepared by incineration at $950^{\circ}C$, and the syrindrical form of the tooth ash was sintered and trimmed to fit the size of the each extraction socket of 10 mongrel dogs. After sugery the clinical, roentgenographical, and histological observation was carried out. The results obtained were as follows; 1. Clinical observation disclosed no dehiscence and exfoliation due to tissue rejection. 2. Vertical resorption of alveolar bone occurred in all experimental sockets as well as the control sites on the roentgenograph. 3. Osteoclastic activity appeared at the inner surfaces of the crestal alveolar bone on the 1st week but disappeared on the 2nd week. 4. There were macrophages in the particulate form on the 1st and 2nd week after surgery but no macrophages appered in the root form. S. New bone formation was developed from the bony wall of experimental sockets and grew to bond with the implant materials. In particulate form the new bone formation did not occur in central zone independently. 6. Tooth ash implant sites were covered with the newly formed bony trabeculation from third week, but Calcitite particles were covered with soft tissue. 7. Generally the healing occurred more rapidly in control sites than in implant sites.

• 대한치과의사협회지
• /
• 제57권8호
• /
• pp.474-479
• /
• 2019

The purpose of the pulp treatment is to make the function of the primary molar in the oral cavity possible for as long as possible until the exfoliation of the tooth or the development of the occlusion is as long as possible. The pulpectomy is a relatively common procedure for the pediatric dentist in the clinic with dental care of the children nowadays. Primary molar is morphologically more susceptible to dental caries than permanent tooth, and the dental pulp treatment is frequently performed. Furthermore, unlike permanent teeth, the root canal has a large degree of curvature and morphological diversity and complexity, careful consideration is needed. Therefore, it is very important to comprehensively understand the morphological characteristics and diversity of the root and root canals for the successful pulp treatment of the primary molars.

• Journal of Periodontal and Implant Science
• /
• 제38권3호
• /
• pp.483-492
• /
• 2008

Purpose: The purpose of this study was to compare clinical effect of the Langer & Langer technique, the modified Langer & Langer technique and Bruno technique. Material and Methods: 30 patients who have gingiva recession(Miller class I or class II) were carried root coverage. Langer & Langer technique(14 patients/32 tooth), modified Langer & Langer technique(5 patients/10 tooth) and Bruno technique(11 patients/18 tooth) was carried. At baseline and average 3 months after operation, it was estimated clinical index(Pocket depth, gingiva recession, clinical attachment level, keratinized gingiva, scar tissue, root coverage rate) by Williams style probe. Result: Root coverage rate is indicated Langer & Langer technique(8S%), Modified Langer & Langer technique(86%) and Bruno technique(90%). Conclusion: All three of the procedures were effective in gingival recession and improved clinical parameters.

• Imaging Science in Dentistry
• /
• 제46권1호
• /
• pp.17-24
• /
• 2016

Purposes: This study employed a posteriori registration and subtraction of radiographic images to quantify the apical root resorption in maxillary permanent central incisors after orthodontic treatment, and assessed whether the external apical root resorption (EARR) was related to a range of parameters involved in the treatment. Materials and Methods: A sample of 79 patients (mean age, $13.5{\pm}2.2years$) with no history of trauma or endodontic treatment of the maxillary permanent central incisors was selected. Periapical radiographs taken before and after orthodontic treatment were digitized and imported to the Regeemy software. Based on an analysis of the post-treatment radiographs, the length of the incisors was measured using Image J software. The mean EARR was described in pixels and relative root resorption (%). The patient's age and gender, tooth extraction, use of elastics, and treatment duration were evaluated to identify possible correlations with EARR. Results: The mean EARR observed was $15.44{\pm}12.1pixels$ (5.1% resorption). No differences in the mean EARR were observed according to patient characteristics (gender, age) or treatment parameters (use of elastics, treatment duration). The only parameter that influenced the mean EARR of a patient was the need for tooth extraction. Conclusion: A posteriori registration and subtraction of periapical radiographs was a suitable method to quantify EARR after orthodontic treatment, and the need for tooth extraction increased the extent of root resorption after orthodontic treatment.

• 대한치과보철학회지
• /
• 제31권3호
• /
• pp.303-316
• /
• 1993

The purpose of this study was to analysis the stress distribution induced by three unit PFM bridges and various cantilever bridges replacing maxillary latersal incisor. The simplified two-dimensional photoelastic models used for this study was contructed in the folio- wing way. CR/R ratio was designed to be 1 : 1, 1 : 1.25 and 1 : 1.5. The pontics of cantilever bridge supported by maxillary canines consisted of wrap-around type, rest-extension type, and simple type. 3-unit PFM bridge was constructed with traditional method. 1kg vertical static load was applied on the center of the incisal edge of the pontic. The stress pattern was examined and recorded by photography. The results obtained were as follows ; 1. The magnitude of stress on the abutment root apex area of a traditional 3-unit bridge was the lowest. 2. The model of cantilevered pontic with a rest showed the relatively well distributed stress around the abutment tooth. The model with simple pontic generated the greatest stress concentration in the supporting structure of the abutment tooth. 3. As the height of bone level reduced, the rotational and vertical force increased around the abutment tooth. 4. The stress concentration of the 3-unit bridges occured on the root apex and stress concentration of the cantilever briage occured on the root apex and cervix area, 5. In the case of the cantilever bridge, stress concentrated distally on the root apex area of the abutment tooth and additional stress was observed mesially on the upper part of the root. Especially in the case of the simple pontic, was phenomenon was more apparent than the others. 6. Force applied to cantilevered pontic was transmitted to the adjacent central incisor through the contact surface. Stress was markedly observed on the mesial cervix area in the case of simple pontic and on the root apex area in the case of wrap-around type and rest-extension type.

• Imaging Science in Dentistry
• /
• 제49권2호
• /
• pp.123-130
• /
• 2019

Purpose: This study was conducted to characterize the relationship of the angulation between the tooth root axis and alveolar bone axis with anterior alveolar(AA) arch forms and sagittal root position (SRP) in the anterior esthetic region using cone-beam computed tomography (CBCT) images. Materials and Methods: CBCT images that met the inclusion and exclusion criteria were categorized using a recent classification of AA arch forms and a SRP classification. Then, the angulation of the root axis and the alveolar bone axis was measured using mid-sagittal CBCT images of each tooth. The relationships of the angulation with each AA arch form and SRP classification were evaluated using 1-way analysis of variance and a linear regression model. Results: Ninety-eight CBCT images were included in this study. SRP had a greater influence than the AA arch form on the angulation of the root axis and the alveolar bone axis(P<0.05). However, the combination of AA arch form and SRP was more predictive of the angulation of the root axis and the alveolar bone axis than either parameter individually. Conclusion: The angulation of the root axis and alveolar bone axis demonstrated a relationship with the AA arch form and SRP in teeth in the anterior esthetic region. The influence of SRP was greater, but the combination of both parameters was more predictive of root-to-bone angulation than either parameter individually, implying that clinicians should account for both the AA arch form and SRP when planning implant placement procedures in this region.