• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.265-276
• /
• 2017

Heavy metals leaching from closed mines have been causing severe environmental problems in nearby soil ecosystems. Mine reclamation in Korea has been recently implemented based on the heavy metal immobilization (a.k.a., stabilization). Since the immobilization temporarily fixes the heavy metals to the soil matrix, the potential risk of heavy metal leaching still exists. Therefore the appropriate monitoring and the related policies are required to safeguard the soils, where all the cultivations occur. The current monitoring methods are based on either heavy metal concentration or simple toxicity test. Those methods, however, are fragmented and hence it is difficult to evaluate the site in an integrated manner. In this study, as the integrated approach, ecological functional state evaluation with a multivariate statistical tool was employed targeting physiochemical soil properties, heavy metal concentrations, microbial enzymatic activity, and arsenic respiratory reductase gene quantity. Total 60 soil samples obtained from three mines (Pungjeong, Jeomdong, Seosung) were analyzed. As a result, the stabilized layer soil and lower layer soil have shown the similar pattern in Pungjeong mine. In contrast, Jeomdong and Seosung mine have shown the similarity between the stabilized layer soil and the cover layer soil, indicating the possible contamination of the cover layer soil.

• Journal of Environmental Impact Assessment
• /
• v.27 no.5
• /
• pp.475-488
• /
• 2018

Surveying urban tributary vegetation is based mainly on field sampling at present. The tributary vegetation survey integrating UAV NIR(Unmanned Aerial Vehicle Near Infrared Radiance) imagery and in-situ point photo has received only limited attentions from the field ecologist. The reason for this could be the largely undemonstrated applicability of UAV NIR imagery by the field ecologist as a monitoring tool for urban tributary vegetation. The principal advantage of UAV NIR imagery as a remote sensor is to provide, in a cost-effective manner, information required for a very narrow swath target such as urban tributary (10m width or so), utilizing very low altitude flight, real-time geo-referencing and stereo imaging. An exhaustive and realistic comparison of the two techniques was conducted, based on operational customer requirement of urban tributary vegetation survey: synoptic information, ground detail and quantitative data collection. UAV NIR imagery made it possible to identify area-wide patterns of the major plant communities subject to many different influences (e.g. artificial land use pattern), which cannot be acquired by traditional field sampling. Although field survey has already gained worldwide recognition by plant ecologists as a typical method of urban tributary vegetation monitoring, this approach did not provide a level of information that is either scientifically reliable or economically feasible in terms of urban tributary vegetation (e.g. remedial field works). It is anticipated that this research output could be used as a valuable reference for area-wide information obtained by UAV NIR imagery in urban tributary vegetation survey.

• Journal of KIISE:Software and Applications
• /
• v.36 no.3
• /
• pp.187-199
• /
• 2009

With the advent of Web 2.0, OpenAPIs are becoming an increasing trend to emphasize Web as platform recently. OpenAPIs are used to combine services and generate new services by mashup. However because the standard documents for OpenAPIs do not exist, it may restrict the use of OpenAPIs. Previous studies of OpenAPIs mashup have been limited to tool design or language definition for service combination rather than dynamic composition. On the other hand, Web services that are a software technology implementing SOA provide standard documents such as WSDL to explain each service, UDDI to register it, and SOAP to transfer messages. Thus Web applications can interpret and execute services by using these technologies. Recent works have also been performed to provide semantic features and dynamic composition for SOA. If a dynamic and systematic approach is provided to combine Web services and OpenAPIs, Web applications can provide users with diverse services. In this study, we present a SOA based framework for mashup of OpenAPIs and Web services. The framework supports dynamic composition of OpenAPIs and Web services, where the process of composite services is described in OWL-S. A prototype is provided to validate our framework. The framework is expected to add diversity to typical Web services.

• The Journal of the Korea Contents Association
• /
• v.15 no.1
• /
• pp.506-518
• /
• 2015

Recently there are growing needs and demand to enhance 'Unity of knowledge' as the concept of "Creating new value through integration and convergence" is developing rapidly in many different areas in the society. This also has significant implication to education. Especially, it requires paradigm shift in terms of required capabilities and qualifications for the students with science major. To accommodate this trend, Natural Sciences and Engineering's College has been increasing convergence education which focus on cultivating creative and cooperative learning capabilities as well as acquiring fundamental knowledge of individual majors. However, convergence education developed and implemented by Sciences college or liberal education so far has been mechanical combination of knowledge from different academic fields - not effectively integrated and interdisciplinary education. Given this situation, this research is to develop and propose a "convergence education program based on the development of scientific and cultural contents" as an education tool to enhance capabilities to apply and re-create integrated knowledge as well as acquire and learn existing knowledge. Education program developed in this research aims to achieve two different and sequential capabilities. First is to understand 'Science and Technology' and 'Cultural Archetype' which would be essential and useful to create cultural contents. Second is to develop capabilities to convert this understanding into cultural contents - a storytelling capability. This education program is differentiated in that it defines cultural contents as a medium to converge and integrate science and technology and humanities. By leveraging the concept of cultural content and storytelling, this education program would be able to overcome restrictions of existing interdisciplinary approach. Also, this program would encourage students to try in-depth research and new applications, and develop logical and creative thinking.

• Archives of design research
• /
• v.19 no.6 s.68
• /
• pp.27-32
• /
• 2006

TYME is an interactive typography program based on the ephemeral nature of time. It is a text based poetic tool, built with Processing. This project is presented as a performance that utilizes a computer with a display screen, a projector, and speakers. As the user types, white characters appear, flow on the score on the screen and trigger jazz sounds, then characters disappear into black space in several seconds on the screen like smoke. Typography from this invented instrument is evocative and wistful, and allows the user to associate with ephemeral time. While typing the characters as though playing an instrument at intervals of time, the user can freeze the motion and print out or save otherwise fleeting moment with a button. I intend to contain both characteristics: the amorphous shape of smoke and the elusive attribute of smoke for the expression of intangible and ephemeral time. Every alphabetic shape is derived from the video dips that I shot of smoke. The resulting alphabetic images are then programmed using the Processing scripting language and which can then be typed on the screen with a keyboard. TYME could be a model as a project that reflects the unfixed quality of digital typography, and as a design approach for interactive expressive typography by scripting code. This project also represents the characteristics of typographic play, which can be realized in an computational environment like this model.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.8 no.2
• /
• pp.132-146
• /
• 2001

Purpose: This study was to analyze the trends and content of all the research (171 research papers) published in the Journal of Fundamentals of Nursing from 1994, when it began to 2000 using an objective tool developed by the researches, and to identify the direction for the future research in Fundamentals of Nursing. Method: Research published in the Journal of Fundamentals of Nursing from 1994 were reviewed. Result: Most of research (94.2%) was non-degree based and funded research was very limited. The average number of researchers per research study was 2.2 and collaborative research has been gradually increasing. The total number of key words was 331 and the average was 2.6 per research. The major key words were not different from other nursing departments and included home care nursing (10 times), health promotion (8 times), self-care (7 times). self-efficacy (7 times), and homo-dialysis (6 times). Eighty seven percent of the research was quantitative research. and there were very few qualitative studies. Considering theory level, it was found that 40% were factor related research For study design, non-experimental studies were most frequent (66%), and the rate, especially of surveys, has remarkably decreased. Selection of subjects by convenience sampling, was most frequent and there were very few studies that provided the rationale for the calculation of sample size. The major subjects of study were patients (44.8%) with various diagnoses. The subjects usually gave oral consent to take part in that study. Giving information (46.9%) and exercise (26.5%) were common nursing interventions, and physiological indices (16.5%). vital signs (10.3%), physical functioning (8.2%), level of knowledge/skill (7.2%) and level of activity (6.2%) were frequently measured as outcome. Variables questionnaires were the major approach used to collect data, and 57.8% of the research provided the Cronbach alpha to guarantee internal consistency of study instruments. Data were analyzed with computerized statistical packages using, ANOVA (42.0%), T test(39.5%), and chi-square test. For the last seven years, nursing research in Fundamentals of Nursing has gradually improved in both quantify and quality. Conclusion: It was difficult to find any uniqueness or difference compared to other departments of nursing. In fact, because the history of the Journal of Fundamentals of Nursing is rather short, we can expect that there will be further improvement in qualify and content in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.292-299
• /
• 2018

The vehicle exterior design is the main parameter of aerodynamic wind noise, but the modification of it is nearly impossible at a proto-type stage. Therefore, it is very important to verify exterior design and estimate the correct wind noise level at the early vehicle design stages. The numerical simulations of aerodynamic wind noises around A-pillar and wiper were developed for specific vehicle exterior designs, but could not be directly used for the discussions with designers because these need complex modeling and simulation process. This study proposes new approach to A-pillar and wiper wind noise estimation at design stage using response surface methodology of modeFRONTIER, of which database is composed of PowerFLOW simulation, PowerCLAY modeling, SEA-Baced (Statistical Energy Analysis-Based) interior noise simulation, and turbulent acoustic power simulation. New design parameters are defined and their contributions are analyzed. A state-of-the-art, easy and reliable CAT (Computer Aided Test) tool for A-pillar and wiper wind noise are acquired from this study, which shows high usefulness in car development.

• The KIPS Transactions:PartD
• /
• v.13D no.6 s.109
• /
• pp.823-832
• /
• 2006

The Purpose of Similarity(Reproduction) Degree Appraisal is to determine the equality or similarity between two programs and it is a system that presents the technical grounds of judgment which is necessary to support the resolution of software intellectual property rights through expert eyes. The most important things in proceeding software appraisal are not to make too much of expert's own subjective judgment and to acquire the accurate-appraisal results. However, up to now standard research and development for its systematic techniques are not properly made out and as different expert as each one could approach in a thousand different ways, even the techniques for software appraisal types have not exactly been presented yet. Moreover, in the analyzing results of all the appraisal cases finished before, through a practical way, we blow that there are some damages on objectivity and accuracy in some parts of the appraisal results owing to the problems of existing appraisal procedures and techniques or lack of expert's professional knowledge. In this paper we present the model for the standardization of software-similarity-appraisal techniques and objective-evaluation methods for decreasing a tolerance that could make different results according to each expert in the same-evaluation points. Especially, it analyzes and evaluates the techniques from various points of view concerning the standard appraisal process, setting a range of appraisal, setting appraisal domains and items in detail, based on unit processes, setting the weight of each object to be appraised, and the degree of logical and physical similarity, based on effective solutions to practical problems of existing appraisal techniques and their objective and quantitative standardization. Consequently, we believe that the model for the standardization of software-similarity-appraisal techniques will minimizes the possibility of mistakes due to an expert's subjective judgment as well as it will offer a tool for improving objectivity and reliability of the appraisal results.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.87-99
• /
• 2006

This study was conducted to investigate whether the moisture variation aspects in pavement materials can be analyzed based on the convenient and reliable relative humidity(RH) measurement techniques. First, the ambient RH was measured using various sensors and the accuracies and calibration methods of the sensors were examined. Then, the RH of a cement mortar specimen was measured using the reliable sensors and the data was analyzed. In addition, the feasibility of using the RH measurement sensors to analyze the permeability of pavement materials was investigated. From this study, it was found that the Hygrochron was the most appropriate sensor to measure the RH of pavement materials, and the proper installation and calibration methods were developed. The RH of the cement mortar specimen tended to approach the ambient RH and was not much affected by the variation of the ambient RH. The specimen's RH variations at the surface and at the center showed a clear time lag. The RH measurement sensor was also found to be an appropriate tool for water permeability tests, and the methodologies to evaluate the permeability of pavement materials were proposed.

• Korean Journal of Environment and Ecology
• /
• v.29 no.3
• /
• pp.454-461
• /
• 2015

This study aims to classify the biotope types based on the vegetation community in built-up areas by different land use and to map the plant communities. By classifying biotopes according to a taxonomic system, the characteristics of a biological community can be well-represented. The biotope classification indexes for the target area include human behavioral factors such as land use intensity, land-use patterns and land-cover types. The type classification was divided into four hierarchic ranks starting with Biotope Class, next by Biotope Group and Biotope Type and lastly by Biotope Sub-Type. The Biotope Class was first divided into two areas: the areas improved by humans and the areas unimproved by humans. The improved areas were again divided into permeable and non-permeable regions on the Biotope Group level. In the Biotope Type level, permeable paving areas were divided into areas with wide gap pavers and those with narrow gap pavers. The differential species of each biotope type are Lindera glauca, Conyza canadensis, Mazus pumilus, Vicia tetrasperma, Crepidiastrum sonchifolium, Zoysis japonica, Potentilla supina and Festuca arundinacea. The results of this study suggest that the biotope classification methodology, using a subjective phytosociological approach, is a useful and valuable tool and the results also suggest the possibility of applying more objective and scientific methods in mapping and classifying various environments.