• 천문학회보
• /
• 제38권2호
• /
• pp.39.1-39.1
• /
• 2013

We use high-resolution hydrodynamic simulations to study nonlinear gas responses to imposed non-axisymmetric stellar potentials in barred-spiral galaxies. The gas is assumed to be infinitesimally thin, isothermal, and unmagnetized. We consider various spiral-arm models with differing strength and pattern speed, while fixing the bar parameters. We find that the extent and shapes of spiral shocks as well as the related mass drift depend rather sensitively on the pattern speed. In models where the arm pattern is rotating more slowly than the bar, the gaseous arms extend from the bar ends all the way to the outer boundary, with a pitch angle slightly smaller than that of the stellar counterpart. The arms drive mass inflows at a rate of ${\sim}0.5-2.5M{\odot}/yr$ to the bar region to which the shock dissipation, external torque, and self-gravitational torque contribute about 50%, 40%, and 10%, respectively. About 85% of the inflowing mass is added to bar substructures such as an inner ring, dust lanes, and a nuclear ring. while the remaining 15% encircles the bar region. On the other hand, models where the arms corotate with the bar exhibit mass outflows, rather than inflows, over most of the arm region. In these models, spiral shocks are much more tightly wound than the stellar arms and cease to exist in the region where $M{\bot}/sinp*{\geq}25-40$, where $M{\bot}$ denotes the Mach number of a rotating gas perpendicular to the arms with pitch angle p*. We demonstrate that the distributions of line-of-sight velocities and densities can be a useful diagnostic tool to distinguish if the arms and bar corotate or not.

• Journal of Computational Design and Engineering
• /
• 제1권4호
• /
• pp.272-288
• /
• 2014

This paper presents a two-step, semi-automated method for reconstructing a three-dimensional (3D) shape of the prostate from a 3D transrectal ultrasound (TRUS) image. While the method has been developed for prostate ultrasound imaging, it can potentially be applicable to any other organ of the body and other imaging modalities. The proposed method takes as input a 3D TRUS image and generates a watertight 3D surface model of the prostate. In the first step, the system lets the user visualize and navigate through the input volumetric image by displaying cross sectional views oriented in arbitrary directions. The user then draws partial/full contours on selected cross sectional views. In the second step, the method automatically generates a watertight 3D surface of the prostate by fitting a deformable spherical template to the set of user-specified contours. Since the method allows the user to select the best cross-sectional directions and draw only clearly recognizable partial or full contours, the user can avoid time-consuming and inaccurate guesswork on where prostate contours are located. By avoiding the usage of noisy, incomprehensible portions of the TRUS image, the proposed method yields more accurate prostate shapes than conventional methods that demand complete cross-sectional contours selected manually, or automatically using an image processing tool. Our experiments confirmed that a 3D watertight surface of the prostate can be generated within five minutes even from a volumetric image with a high level of speckles and shadow noises.

• 한국지진공학회논문집
• /
• 제6권5호
• /
• pp.1-17
• /
• 2002

전회의 논문(Choi et al)에 이어 본 논문에서는 동해에서의 가상해저지진에 의한 지진해일의 예단적 특성을 동해에 연한 전해안에 걸쳐 논하였는데 재해를 유발시킬 수 있는 지진해일의 근원역은 공백역이론으로부터 선택되었다. 선형장파이론에 근거한 수치모형을 채택하여 28개의 선정된 자세한 단층 파라미터를 갖는 가상지진(4경우 실제지진 포함)과 단순화시킨 형태의 초기 수면형에 의한 76개 사상의 지진해일 시뮬레이션을 수행하여 전파 및 해안에서의 지진해일의 파고를 산정하는 데 적용 되었다. 결과로서 동해에 연한 전해안 전역에 전파되는 지진해일의 특성과 해안역에서의 지진해일의 파고 분포가 산정되어 지진해일 재해위험도가 상대적으로 낮은 지리적 위치를 구획화하여 제시함으로써 해안재해경감대책의 도구로서 활용될 수 있게 하였다.

• 한국의상디자인학회지
• /
• 제7권1호
• /
• pp.41-54
• /
• 2005

The purposes of this study on various headgear at the age of the Persian Achaemenes are to analyze one cultural aspect of the Achaemenes Kingdom that made a great empire about 5th century B.C. and to understand the ancient Persian culture. It is widely recognized that the Persian region was an important place for cultural exchange between the East and the West through the Silk Road and its culture affected China and Korea. Therefore, it is necessary to study ancient culture in this region for further understanding of the Korean culture. However, research activities have not been satisfactorily conducted. This study is an attempt to elevate the interest in this subject. In this study, European archeological materials covering Naqsh-e-Rostam (a tomb of Darius), Apadana stairs, Darius palace in Persepolis, and Bistun(Behistun), the relief at the age of the Achaemenes Kingdom, were collected and analyzed. From this study, the following results were obtained. For crowns at the age of the Achaemenes Kingdom, two kinds of shapes are observed; Mitra, a kind of headband, in the early period and a cylindrical one in the later period. Mitra was also worn by chiefs trusted by the king. Further, slightly different styles of cylindrical crowns were observed, which is considered that kings might wear unique crowns to symbolize new period of their reign. In addition to crowns, various styles of headgear for subjects are observed, meaning that tribes conquered by the Persian empire used their unique headgear. Further, such different styles of headgear might be a tool for social classification. Representative styles of headgear include the semicircular one worn by the Median nobles, Strophion originated from the Elam's headband, and nomadic tribes' Baschlik observed in the Median relics.

• International Journal of Fluid Machinery and Systems
• /
• 제2권4호
• /
• pp.286-294
• /
• 2009

Hydroelectric power plants are known for their ability to cover variations of the consumption in electrical power networks. In order to follow this changing demand, hydraulic machines are subject to off-design operation. In that case, the swirling flow leaving the runner of a Francis turbine may act under given conditions as an excitation source for the whole hydraulic system. In high load operating conditions, vortex rope behaves as an internal energy source which leads to the self excitation of the system. The aim of this paper is to identify the influence of the full load excitation source location with respect to the eigenmodes shapes on the system stability. For this, a new eigenanalysis tool, based on eigenvalues and eigenvectors computation of the nonlinear set of differential equations in SIMSEN, has been developed. First the modal analysis method and linearization of the set of the nonlinear differential equations are fully described. Then, nonlinear hydro-acoustic models of hydraulic components based on electrical equivalent schemes are presented and linearized. Finally, a hydro-acoustic SIMSEN model of a simple hydraulic power plant, is used to apply the modal analysis and to show the influence of the turbine location on system stability. Through this case study, it brings out that modeling of the pipe viscoelastic damping is decisive to find out stability limits and unstable eigenfrequencies.

• Journal of Biosystems Engineering
• /
• 제39권3호
• /
• pp.244-252
• /
• 2014

Purpose: The development of an efficient in vitro cell culture device to process various cells would represent a major milestone in biological science and engineering. However, the current conventional macro-scale in vitro cell culture platforms are limited in their capacity for detailed analysis and determination of cellular behavior in complex environments. This paper describes a microfluidic-based culture device that allows accurate control of parameters of physical cues such as pressure. Methods: A microfluidic device, as a model microbioreactor, was designed and fabricated to culture Saccharomyces cerevisiae and Chlamydomonas reinhardtii under various conditions of physical pressure stimulus. This device was compatible with live-cell imaging and allowed quantitative analysis of physical cue-induced behavior in yeast and microalgae. Results: A simple microfluidic-based in vitro cell culture device containing a cell culture channel and an air channel was developed to investigate physical pressure stress-induced behavior in yeasts and microalgae. The shapes of Saccharomyces cerevisiae and Chlamydomonas reinhardtii could be controlled under compressive stress. The lipid production by Chlamydomonas reinhardtii was significantly enhanced by compressive stress in the microfluidic device when compared to cells cultured without compressive stress. Conclusions: This microfluidic-based in vitro cell culture device can be used as a tool for quantitative analysis of cellular behavior under complex physical and chemical conditions.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.387-393
• /
• 2012

It is very difficult to determine suitable cutting conditions in order to obtain accurate cutting profiles because machining errors caused by tool deflection depend upon cutting conditions. In this study the relationship between real cutting profiles (inclined shapes and machining errors) and cutting conditions was modeled in order to fabricate draft angle on micro molds. CCD (Central Composite Design) of DOE (Design Of Experiment) and RSM (Response Surface Method) were applied in order to model the relationship between cutting conditions and machining errors. In order to use CCD the range of radial depth of cut was chosen by $10-90{\mu}m$ and the range of feedrate was chosen by 200-300mm/min, and 9 points of cutting conditions were chosen inside determined ranges. Then, actual cutting processes were carried out as respect to 9 points of cutting conditions, draft angles and real cutting profiles were measured on cutting profiles, each response surface function was determined by conducting response surface analysis and the functions were represented by 3-dimensional graphs, contour lines and $101{\times}101$ matrices. Consequently it is possible to determine suitable cutting conditions in order to obtain arbitrary given draft angles and cutting profiles by using modeling. To validate proposed approach in this study suitable cutting conditions were determined by modeling in order to obtain arbitrary given draft angle and cutting profile, and actual cutting processes were carried out. About 95% of good agreement between predicted and measured values was obtained.

• 한국정밀공학회지
• /
• 제15권10호
• /
• pp.65-72
• /
• 1998

The BTA drilling chip is better for deep hole drilling than other self-piloting with pad drilling chips because the large length to diameter ratio allows a unique cutting force dispersion and better supplies the high pressure fluid. Therefore the BTA is useful for many tasks, such as coolant hole drilling of large scale dies, as well as tube seat drilling, which is essential for the heat exchanger, and variable component drilling for automobiles. Deep hole drilling has several significant problems, such as hole deviation, hole over-size, circularity, straightness, and surface roughness. The reasons for these problems, which often result in quality short comings, are an alignment of the BTA drilling system and the unbalance of cutting force by work piece and tool shape. This paper analyzes the properties through an experiment which com¬pared single-edge BTA drills with multiple-edge BTA drills, as well as the shapes of the tools to cause an unbalance of cutting force, and its effect on the precision of the worked hole. Conclusions are as follows. 1) In SMSSC drilling, 60m/min of BTA with single and multi-edged tools proved the best cutting condition and the lowest wear character. 2) The roundness got a little worse as cutting speed was increased, but surface roughness was hot affected. 3) It was proved that the burnishing torque of both drills approached 26%. which is almost the same as the 24% insisted on by Griffiths, and the dispersion characteristic of the multi-edged BTA drill proved better than the single-edge BTA drill.

• 대한수의학회지
• /
• 제39권1호
• /
• pp.148-158
• /
• 1999

The purpose of this study was to establish a rapid, reliable diagnostic method detecting Encephalomyocarditis virus(EMCV) RNA in formalin-fixed, paraffin-embedded tissues of EMCV naturally infected pigs by cDNA probe of EMC $K_3$, the EMCV strain isolated from Korea. Using a biotin-labelled nick translated probe for the cDNA marker. We made up for some defects of radiolabeled method. In sits hybridization(ISH) technique, differently from the other nucleic acid hybridization methods, is able to detect the virus genome specifically in the state of the intact shapes of cells and/or tissues. We succeeded in performing the experiment to detect the EMCV within 1~2 hours using the $MicroProbe^{TM}$ capaillary action system. In this study, we observed highly specific positive signals of red color by staining the paraffin-embedded tissue sections of naturally EMCV-infected pig organs or tissues, including brain, heart, kidney and lacrimal gland with the Fast Red TR salt/Naphtol phosphate chromogen. The results suggested that this ISH method is considered as a highly sensitive and reliable tool for molecular biologic diagnosis of the EMC viral disease.

• 한국항공우주학회지
• /
• 제33권1호
• /
• pp.1-10
• /
• 2005

비정렬 격자계에서 continuous adjoint 방정식을 사용하여 제자리 비행을 하는 헬리콥터 로터 블레이드에 대한 공력 형상 최적설계 기법을 개발하였다. 효율적인 민감도 계산을 위해 회전좌표계에서 continuous adjoint 민감도 해석 기법을 유도하였다. 설계과정의 반복적인 수치계산의 효율을 높이기 위해서 영역 분할 기법에 기반을 둔 병렬처리 기법을 도입하였다. 끝단 와류의 정확한 포착을 위해서 끝단와류를 따른 격자적응을 수행하였다. 이러한 방법은 Caradonna와 Tung의 실험형상 및 UH60 헬리콥터 로터 블레이드의 공력 최적설계에 적용되었으며, 본 연구에서 사용된 최적설계 기법을 이용하면 일정한 추력을 유지하면서 요구동력을 현저하게 줄일 수 있음을 보였다.