• 한국재료학회지
• /
• 제34권2호
• /
• pp.105-110
• /
• 2024

Scanning probe microscopy (SPM) has become an indispensable tool in efforts to develop the next generation of nanoelectronic devices, given its achievable nanometer spatial resolution and highly versatile ability to measure a variety of properties. Recently a new scanning probe microscope was developed to overcome the tip degradation problem of the classic SPM. The main advantage of this new method, called Reverse tip sample (RTS) SPM, is that a single tip can be replaced by a chip containing hundreds to thousands of tips. Generally for use in RTS SPM, pyramid-shaped diamond tips are made by molding on a silicon substrate. Combining RTS SPM with Scanning spreading resistance microscopy (SSRM) using the diamond tip offers the potential to perform 3D profiling of semiconductor materials. However, damage frequently occurs to the completed tips because of the complex manufacturing process. In this work, we design, fabricate, and evaluate an RTS tip chip prototype to simplify the complex manufacturing process, prevent tip damage, and shorten manufacturing time.

• 대한화장품학회지
• /
• 제41권3호
• /
• pp.279-285
• /
• 2015

여성의 얼굴에 과색소침착이 발생하는 것은 불안감, 특히 미적인 요소에 있어서 많은 고민을 유발한다. 피부의 흑화는 자외선(UV)에 대하여 이를 방어하기 위한 기작으로 멜라닌의 양과 밀접한 관계가 있다. 이러한 피부의 구성성분을 관찰하기 위해, confocal scanning laser microscope (CSLM)은 피부에 직접 현미경 검사를 실시하여 어떠한 조직의 변화 없이 피부를 실시간으로 관찰할 수 있는 비침습적 이미지 장치이다. 본 연구에서는 자외선 조사를 통해 유도된 하박 내측 피부의 과색소침착을 유도하여, 다른 피부색을 평가하는 측정기기와 상관성을 분석하여, CSLM을 이용한 새로운 미백 평가방법을 제시하였다. CSLM을 활용한 미백 효능 평가법은 소비자가 보다 이해하기 쉽도록 미백 제품을 평가하는데 유용할 것으로 생각된다.

• 열처리공학회지
• /
• 제24권5호
• /
• pp.262-270
• /
• 2011

Carbide precipitation and dissolution behavior at various temperatures during heat treatment has been studied in STD11 cold working die steel through confocal scanning laser microscopy; dilatometry; and X-ray diffraction analysis. The equilibrium phase diagram and phase fractions with temperature were calculated using a FactSage program. Confocal laser microscopic observation revealed that ${\alpha}$ to ${\gamma}$ transformation temperature is near $800^{\circ}C$; M7C3 carbides melt at $1245^{\circ}C$; and the melting temperature of STD11 is near $1370^{\circ}C$. XRD results indicated that the M23C6 carbides dissolve in the matrix if austenitized at over $1030^{\circ}C$; while the M7C3 carbides remain up to $1200^{\circ}C$ although their amount decreases. The calculated equilibrium phase diagram showed good agreement with experimental results on carbide dissolution and phase transformation temperatures.

• 대한세포병리학회지
• /
• 제4권1호
• /
• pp.9-15
• /
• 1993

The aim of the present study is to demonstrate the usefulness of intraoperative fine needle aspiration (FNA) of pancreatic lesions in 30 patients. A conclusive diagnosis was done in 27 patients and the diagnoses of three patients were deferred. No complications followed the procedure. Based on histologic findings of the resected specimens in 20 cases and of cell blocks in 10 cases, the final diagnoses were adenocarcinoma in 19 cases, chronic pancreatitis in nine cases and tuberculosis in two cases. The sensitivity, specificity and diagnostic accuracy were 95%, 100% and 96% resepectively and there were no false positives. The smear of aspirate was stained with toluidine blue and examined by light microscope. The presence of there-dimensional clusters of disoriented cells and the increased nuclear/cytoplasmic ratio with large prominent nucleoli were the most helpful criteria for a diagnosis of malignancy in the pancreas. The intraoperative FNA of pancreatic lesions was considered as a simple, safe, and highly specific and sensitive tool in differentiating benign from malignant lesions. The intraoperative FNA can be recommended as the first tool of choice of intraoperative diagnostic procedure in lesions of the pancreas.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.23-28
• /
• 2020

In general, lithography techniques are applied when machining single-crystal silicon in nanoscale applications; however, these techniques involve low degrees of freedom for the vertical shapes. By applying mechanical techniques to machine silicon, nanopatterns having various types of vertical shapes can be manufactured. In this study, we determined the ductile-brittle machining transition point and analyzed the- variation of the specific cutting resistance within the ductile machining region in nanoscale applications. When brittle fracture occurred during the nanoscale cutting, the depth of cut and cutting force increased and decreased rapidly, respectively. The first point of rapid increase in the depth of cut was defined as the ductile-brittle machining point. Subsequently, the shape of the machining tool was observed using a scanning electron microscope to calibrate the machining area, considering the tip blunting. The specific cutting resistance decreased continuously and converged to a certain value during the nanoscale cutting. The decrease and convergence in the value can be attributed to the decrease in the ratio of the arc length to the area of the machining tool and silicon.

• 한국어병학회지
• /
• 제33권2호
• /
• pp.103-109
• /
• 2020

In order to use nervous necrosis virus (NNV) virus-like particles (VLPs) as a delivery tool for heterologous antigens or plasmids, we attempted to produce red-spotted grouper nervous necrosis virus (RGNNV) VLPs displaying a partial region of viral hemorrhagic septicemia virus (VHSV) glycoprotein at the surface and VLPs that are harboring DNA vaccine plasmids within the VLP. A peptide encoding 105 amino acids of VHSV glycoprotein was genetically inserted in the loop region of NNV capsid gene, and VLPs expressing the partial part of VHSV glycoprotein were successfully produced. However, in the transmission electron microscope analysis, the shape and size of the partial VHSV glycoprotein-expressing NNV VLPs were irregular and variable, respectively, indicating that the normal assembly of capsid proteins was inhibited by the relatively long foreign peptide (105 aa) on the loop region. To encapsulate by simultaneous transformation with both NNV capsid gene expressing plasmids and DNA vaccine plasmids (having an eGFP expressing cassette under the CMV promoter), NNV VLPs containing plasmids were produced. The encapsulation of plasmids in the NNV VLPs was demonstrated by PCR and cells exposed to the VLPs encapsulating DNA vaccine plasmids showed fluorescence. These results suggest that the encapsulation of plasmids in NNV VLPs can be done with a simple one-step process, excluding the process of disassembly-reassembly of VLPs, and NNV VLPs can be used as a delivery tool for DNA vaccine vectors.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.706-713
• /
• 2016

본 연구에서는 이종소재 A6005-AZ61 접합을 위하여 마찰교반용접의 툴 삽입 위치와 모재의 냉각 유 무에 따라 용접부 특성을 분석하였다. 다른 용접 조건들인 툴 회전속도와 이송속도는 500rpm-30mm/min으로 고정하고 Advancing side에 알루미늄 합금(A6005), Retreating side에 마그네슘 합금(AZ61)을 배치하여 용접을 진행하였다. 용접은 여섯 가지 케이스를 진행하였다. 용접부 특성을 관찰하기 위하여 인장 시험을 진행하고, 광학현미경을 사용하여 용접부의 미세조직을 관찰하였다. 인장시험 결과 마그네슘 합금 방향으로 툴을 1mm 이동시키고 모재에 냉각을 시킨 조건에서 강도가 가장 높게 나타났다. 동일한 용접 조건에서 냉각을 한 경우에 냉각을 하지 않은 것 보다 강도가 약 2배 높게 측정되었다. 툴의 위치는 용접부 중심에서 알루미늄 합금 방향으로 1.7mm, 마그네슘 합금 방향으로 1.7mm 이동시켜 과도한 편심을 적용한 용접 조건에서는 교반이 잘 이루어지지 않아 용접부의 건전성이 가장 좋지 않았다. 과도한 편심을 적용한 용접 조건에서는 교반이 잘 이루어지지 않아 용접부의 건전성이 가장 좋지 않았다. 본 연구를 통해 A6005-AZ61 이종 마찰교반용접시 용접속도와 툴 회전속도만큼 모재의 온도 조절과 툴 삽입위치가 중요한 용접변수임을 확인 하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.720-725
• /
• 2002

In recent years, techniques for micro-assembly with high repeatability under a scanning electron microscope (SEM) are required to construct highly functional micro-devices. Adhesion phenomenon is more significant for smaller objects, becanse adhesional force is proportional to size of the objects while gravitational force is proportional to the third power of it. It is also known that adhesional force between micro-objects exposed to Electron Beam irradiation of SEM increases with the elapsed time. Therefore, mechanical manipulation techniques using a needle-shaped tool by adhesional force are often adopted in basic researches where micro-objects are studied. These techniques, however, have not yet achieved the desired repeatability because many of these could not have been supported theoretically. Some techniques even need the process of trial-and-error. Thus, in this paper, mechanical and adhesional micro-manipulation are analyzed theoretically by introducing new physical factors, such as adhesional force and rolling-resistance, into the kinematic system consisting of a sphere, a needle-shaped tool, and a substrate. Through this analysis, they are revealed that how the micro-sphere behavior depends on the given conditions, and that it is possible to cause the fracture of the desired contact interfaces selectively by controlling the force direction in which the tool-tip loads to the sphere. Based on the acquired knowledge, a mode diagram, which indicates the micro-sphere behavior for the given conditions, is designed. By refening to this mode diagram, the practical technique of the pick and place manipulation of a micro-sphere under an SEM by the selective interface fracture is proposed.

• International Journal of Korean Welding Society
• /
• 제2권2호
• /
• pp.19-25
• /
• 2002

In recent years, techniques for micro-assembly with high repeatability under a scanning electron microscope (SEM) are required to construct highly functional micro-devices. Adhesion phenomenon is more significant for smaller objects, because adhesional force is proportional to size of the objects while gravitational force is proportional to the third power of it. It is also known that adhesional force between micro-objects exposed to Electron Beam irradiation of SEM increases with the elapsed time. Therefore, mechanical manipulation techniques using a needle-shaped tool by adhesional force are often adopted in basic researches where micro-objects are studied. These techniques, however, have not yet achieved the desired repeatability because many of these could not have been supported theoretically. Some techniques even need the process of trial-and-error. Thus, in this paper, mechanical and adhesional micro-manipulation are analyzed theoretically by introducing new physical factors, such as adhesional force and rolling-resistance, into the kinematic system consisting of a sphere, a needle-shaped tool, and a substrate. Through this analysis, they are revealed that how the micro-sphere behavior depends on the given conditions, and that it is possible to cause the fracture of the desired contact Interfaces selectively by controlling the force direction in which the tool-tip loads to the sphere. Based on the acquired knowledge, a mode diagram, which indicates the micro-sphere behavior for the given conditions, is designed. By referring to this mode diagram, the practical technique of the pick and place manipulation of a micro-sphere under an SEM by the selective interface fracture is proposed.

• Applied Microscopy
• /
• 제47권3호
• /
• pp.160-164
• /
• 2017

Electron crystallography has been used as the one of powerful tool for studying the structure of biological macromolecules at high resolution which is sufficient to provide details of intramolecular and intermolecular interactions at near-atomic level. Previously it commonly uses two-dimensional crystals that are periodic arrangement of biological molecules, however recent studies reported a novel technical approach to electron crystallography of three-dimensional crystals, called micro electron-diffraction (MicroED) which involves placing the irregular and small sized protein crystals in a transmission electron microscope to determine the atomic structure. In here, we review the advances in electron crystallography techniques with several recent studies. Furthermore, we discuss the future direction of this structural approach.