• 제목/요약/키워드: Tool management

검색결과 4,240건 처리시간 0.031초

환경부 토지피복도 사용여부에 따른 예측 SWAT 오류 평가 (Analysis of SWAT Simulated Errors with the Use of MOE Land Cover Data)

  • 허성구;김남원;유동선;김기성;임경재
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.194-198
    • /
    • 2008
  • Significant soil erosion and water quality degradation issues are occurring at highland agricultural areas of Kangwon province because of agronomic and topographical specialities of the region. Thus spatial and temporal modeling techniques are often utilized to analyze soil erosion and sediment behaviors at watershed scale. The Soil and Water Assessment Tool (SWAT) model is one of the watershed scale models that have been widely used for these ends in Korea. In most cases, the SWAT users tend to use the readily available input dataset, such as the Ministry of Environment (MOE) land cover data ignoring temporal and spatial changes in land cover. Spatial and temporal resolutions of the MOE land cover data are not good enough to reflect field condition for accurate assesment of soil erosion and sediment behaviors. Especially accelerated soil erosion is occurring from agricultural fields, which is sometimes not possible to identify with low-resolution MOD land cover data. Thus new land cover data is prepared with cadastral map and high spatial resolution images of the Doam-dam watershed. The SWAT model was calibrated and validated with this land cover data. The EI values were 0.79 and 0.85 for streamflow calibration and validation, respectively. The EI were 0.79 and 0.86 for sediment calibration and validation, respectively. These EI values were greater than those with MOE land cover data. With newly prepared land cover dataset for the Doam-dam watershed, the SWAT model better predicts hydrologic and sediment behaviors. The number of HRUs with new land cover data increased by 70.2% compared with that with the MOE land cover, indicating better representation of small-sized agricultural field boundaries. The SWAT estimated annual average sediment yield with the MOE land cover data was 61.8 ton/ha/year for the Doam-dam watershed, while 36.2 ton/ha/year (70.7% difference) of annual sediment yield with new land cover data. Especially the most significant difference in estimated sediment yield was 548.0% for the subwatershed #2 (165.9 ton/ha/year with the MOE land cover data and 25.6 ton/ha/year with new land cover data developed in this study). The results obtained in this study implies that the use of MOE land cover data in SWAT sediment simulation for the Doam-dam watershed could results in 70.7% differences in overall sediment estimation and incorrect identification of sediment hot spot areas (such as subwatershed #2) for effective sediment management. Therefore it is recommended that one needs to carefully validate land cover for the study watershed for accurate hydrologic and sediment simulation with the SWAT model.

  • PDF

간호사의 근무부서 이동에 대한 태도와 직무만족도와의 관계 (A Study on the Attitude on the Transfer of Duty Post and Job Satisfaction of Nurses)

  • 장경화;이은미
    • 동서간호학연구지
    • /
    • 제11권1호
    • /
    • pp.12-24
    • /
    • 2005
  • The objective of this research is to explore the attitude on the transfer of duty post and job satisfaction of nurses. The subjects of this study were 512 nurses who have engages in the K-university hospital. The measurement tool consisted of attitude on the transfer of duty post, job satisfaction. The collected data have been processed using SPSS/PC 12.0 program: The results of this study were as follows: 1. The age the subjects was from 21 to 56 and average 32, blow 3 years experience in current duty post occupied most by 37.1%. The experience of the transfer of duty post showed 50.2%. 51.4% of the nurses wanted $3{\sim}5$ years as the suitable periods for the transfer of duty post showing the highest degree of frequency. 2. The positive degree of the attitude on the transfer of duty post of the nurses appeared average (3.36) to maximum evaluation point 5, and when asked about 4 factors the nurses wanted individual development most by (3.72) while administration management was lowest by (2.65). The satisfaction degree on their job appeared to be average (3.06) to the maximum point 5, and when asked about 7 factors, interaction appeared to be the highest by (3.63), here we saw that interaction was the most important elevating factor of the job satisfaction degree. 3. In the relation of the attitude on the transfer of duty post according to general characteristics, there were the significant difference according to whether it is necessary for the current duty post and periodical duty post to be transferred. In the relation between general characteristics and job satisfaction degree there were the significant differences according to age, marital status, education, position of nurse, hospital clinical nursing experiences, satisfaction degree with current post and the hope of the transfer of duty post from current post. 4. The correlation between attitude on the transfer of duty post and job satisfaction degree was positive relation(r=0.137, p=.002), that the higher the degree of positive attitude on the transfer of duty post the higher the degree of job satisfaction.

  • PDF

Design of Vision Based Punching Machine having Serial Communication

  • Lee, Young-Choon;Lee, Seong-Cheol;Kim, Seong-Min
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.2430-2434
    • /
    • 2005
  • Automatic FPC punching instrument for the improvement of working condition and cost saving is introduced in this paper. FPC(flexible printed circuit) is used to detect the contact position of K/B and button like a cellular phone. Depending on the quality of the printed ink and position of reference punching point to the FPC, the resistance and current are varied to the malfunctioning values. The size of reference punching point is 2mm and the above. Because the punching operation is done manually, the accuracy of the punching degree is varied with operator's condition. Recently, The punching accuracy has deteriorated severely to the 2mm punching reference hall so that assembly of the K/B has hardly done. To improve this manual punching operation to the FPC, automatic FPC punching system is introduced. Precise mechanical parts like a 5-step stepping motor and ball screw mechanism are designed and tested and low cost PC camera is used for the sake of cost down instead of using high quality vision systems for the FA. 3D Mechanical design tool(Pro/E) is used to manage the exact tolerance circumstances and avoid design failures. Simulation is performed to make the complete vision based punching machine before assembly, and this procedure led to the manufacturing cost saving. As the image processing algorithms, dilation, erosion, and threshold calculation is applied to obtain an exact center position from the FPC print marks. These image processing algorithms made the original images having various noises have clean binary pixels which is easy to calculate the center position of print marks. Moment and Least square method are used to calculate the center position of objects. In this development circumstance, Moment method was superior to the Least square one at the calculation of speed and against noise. Main control panel is programmed by Visual C++ and graphical Active X for the whole management of vision based automatic punching machine. Operating modes like manual, calibration, and automatic mode are added to the main control panel for the compensation of bad FPC print conditions and mechanical tolerance occurring in the case of punch and die reassembly. Test algorithms and programs showed good results to the designed automatic punching system and led to the increase of productivity and huge cost down to law material like FPC by avoiding bad quality.

  • PDF

재난대응 의사결정 지원을 위한 시설물 중요도·위험도·피해액 산정 인벤토리 구축 방안 연구 (Development Plan of Facility Importance, Risk, and Damage Estimation Inventory Construction for Assisting Disaster Response Decision-Making)

  • 최수영;강수명;조윤원;오은호;박재우;김길호
    • 한국지리정보학회지
    • /
    • 제19권1호
    • /
    • pp.167-179
    • /
    • 2016
  • 최근 범지구적으로 증가하는 이상기후에 의해 SOC 시설물 안전이 지속적으로 위협받고 있다. 재난대응을 위해서는 피난 대피 경로 제시 등과 같은 신속한 의사결정이 필요하며 이는 재난 재해 정보 및 SOC 시설물 정보가 융 복합된 시공간적 정보가 활용되어야 한다. 이러한 정보는 정부 및 유관기관에서 분산적으로 수집되고 있어, 통합적 관리가 이루어지지 않고 있는 실정이다. 신속한 재난대응을 위해서는 분산 수집 관리되고 있는 재난 재해 정보의 통합관리와 SOC 시설물에 대한 안전도와 피해도 등의 정보 생성이 필요하다. 또한 재난 재해 정보 특성상 시공간적 융합이 필요하기 때문에, 관련 정보를 통합한 재해대응 의사결정 지원을 위한 인벤토리 구축이 필요하다. 본 연구에서는 신속한 재난대응의사결정 지원을 위한 시설물 중요도 위험도 피해액 인벤토리 구축 방안을 제시한다. 본 연구를 통해 분산 관리 되고 있는 재난 재해 및 SOC 시설물 관련 데이터를 수집하여 표준화 하고, 시설물의 중요도 위험도 피해액 산정에 필요한 통합 정보를 제공 할 수 있다. 향후 제안된 시스템을 통해 선제적 재난 대응을 위한 의사결정 도구로 활용할 수 있을 것으로 판단된다.

기준점 관리를 위한 온톨로지 모델링과 적용 방안 (Ontology Modeling and Its Application for Managing Control Points)

  • ;황현숙;신성현;서용철;김창수
    • 한국지리정보학회지
    • /
    • 제11권3호
    • /
    • pp.34-42
    • /
    • 2008
  • 정확한 지리위치 좌표를 나타내는 기준점은 국가의 중요한 자산으로써 전국토의 측량과 기타 측량 사업에 사용되고 있다. 유비쿼터스 기술의 발전으로 위치정보는 우리 생활에서 중요한 역할을 하고 있다. 현재 RFID (Radio-Frequency Identification)와 같은 유비쿼터스 기술을 기준점 관리 시스템에 융합함으로써 관리의 효율성을 제고하기 위해 여러 분야에서 연구가 진행되고 있다. 그러나 기존의 연구에서는 데이터 관점에서 기준점 관리를 위한 호환성과 효율적인 검색에 대한 연구는 미비한 실정이다. 따라서, 본 논문에서는 온톨로지 기술을 사용하여 기준점 데이터를 효율적으로 검색하기 위한 데이터 모델링을 구축하고 그의 적용 방안에 초점을 두어 연구한다. 제안된 온톨로지 기반의 검색 시스템은 계층적 검색으로 사용자의 반복된 검색 수행을 줄일 수 있고, 연관 검색으로 검색 시간을 줄일 수 있는 장점이 있다. 또한, 사용자 인터페이스와 관련된 소스 코드를 수정하지 않고 카테고리와 속성의 항목을 편집할 수 있는 효과적인 검색 시스템 구축 방법을 제안한다.

  • PDF

RFID 시스템에 적용시 안전한 보안인증 프로토콜의 모델검증 (Model Verification of a Safe Security Authentication Protocol Applicable to RFID System)

  • 배우식;정석용;한군희
    • 디지털융복합연구
    • /
    • 제11권4호
    • /
    • pp.221-227
    • /
    • 2013
  • RFID는 IC 칩과 무선통신을 통해 다양한 개체의 정보를 관리할 수 있는 인식기술이다. 생산에서 판매에까지의 과정을 초소형 IC 칩에 내장하여 이를 무선으로 추적하는 기술로써 전자태그, 스마트태그 또는 전자라벨 등으로 불러지고 있다. 현재 의료, 국방, 물류, 보안 등에 응용하여 사용하기위해 적용 및 개발이 진행되고 있으나 구조상 태그의 정보를 읽어 들이는 리더와 정보를 제공하는 태그, 데이터를 관리하는 데이터베이스로 구성되는데 리더와 태그 구간이 무선구간으로 보안에 취약한 문제가있다. 따라서 취약한 부분을 해결하고자 보안프로토콜의 연구가 활발히 진행되고 있으나 구현부분이 어려워 정리증명 단계의 제안이 대부분이다. 이는 추후 다른 연구자에 의해 취약성이 발견되는 부분이 많아 실제시스템에 적용시 많은 어려움이 존재한다. 본 논문에서는 제안한 보안프로토콜을 CasperFDR 정형검증 도구를 사용하여 제안한 프로토콜의 보안성을 실험 검증하였으며 각종공격에 안전한 방식임이 확인되었다. 향후 실제 태그에 적용할시 보안성에 대한 안전보장 및 새로운 공격에 대한 안전성을 충족하였다.

초등학생 고학년 남아의 자기통제력, 부모의 양육행동, 부모간 갈등이 공격성에 미치는 영향 (The Effects of Self-Control, Parental Behaviors, and Marital Conflict on Boys' Aggression in Korean Upper Elementary School Students)

  • 전주람;김순옥
    • 가정과삶의질연구
    • /
    • 제30권2호
    • /
    • pp.101-120
    • /
    • 2012
  • This research was conducted in order to find out the effects of boys' self-control, their parents' behaviors and marital conflict on boys' aggression. Subtypes of aggression in the present research consist of dimensions of the functions and forms (proactive-overt, proactive-relational, reactive-overt, reactive-relational). The participants of this study were 237 boys in the fifth and sixth grades in elementary schools located in Seoul and Gyeonggi province. The questionnaires were derived and modified from Lee Hong (2009) for boys' aggression, from Ju So Young and Lee Yang Hee (2008) for boys' self-control, from Jun Joo Ram (2008) and Heo Seung Yeon (2009) for maternal behaviors and from Kang Na Jung (2008) for marital conflict. In order to grasp the general characteristics of the participants, frequency and descriptive statistics were used. Also, Pearson's correlation was applied to the relationships amomg boys' self-control, marital behaviors and marital conflict on boys' aggression. Lastly, the variables that can predict boys' aggression were analyzed through multiple regression analysis by SPSS 19.0. The major results of this study were as follows. This research showed that this model fit well for boys. To summarize the important results, what is interesting in the present study is the effect of the mother's role in rearing their sons. It was found that mothers' criticism, negative behaviors, and excessive interference can cause boys' high level of aggressiveness. Also, having parents who fight frequently was strongly associated with boys' relational aggression. An interesting finding is that the mother's support influenced boys' reactive-overt aggression. Lastly, boys' self-control was highly associated with boys' proactive-relational aggression. This research may contribute to understanding boys' aggression' subtypes. To that end, the current results suggest that the dimensions of the functions and forms may be a useful tool in an effort to inform developmental theory and intervention. Also, this research may provide guidance for the resolution of problems caused by boys' aggression. Lastly, it was found that self- control training and parental education programs might prove beneficial for helping aggressive boys to overcome their aggressive impulses.

지자체 도시기본계획의 홍수예방정책 평가: 미국 플로리다 사례를 중심으로 (An Assessment of Flood Mitigation Policies Integrated in Local Comprehensive Plans: The Case of Florida in the United States)

  • 강정은
    • 환경정책연구
    • /
    • 제11권4호
    • /
    • pp.59-84
    • /
    • 2012
  • 계획가들은 지자체가 기후변화로 심화되고 있는 홍수에 대해 더욱 관심을 가지고 적절한 홍수예방정책을 도시계획에 통합하고 반영한다면 홍수피해를 줄이는데 기여할 수 있을 것이라고 믿고 있다. 이러한 계획가들의 생각을 검증하기 위한 첫 번째 단계로 지자체 도시기본계획에 채택된 홍수예방정책들의 종류와 수준을 계획평가 방법론을 활용하여 평가하였다. 주요 홍수예방정책들로 구성된 프로토콜을 바탕으로 플로리다 53개 지자체 도시기본계획이 분석되었다. 본 연구의 분석결과 도시별로 도시기본계획에서 채택한 수해예방정책의 종류와 수준이 상당히 다양함을 보였다. 플로리다에서는 홍수터의 토지이용 규제, 습지개발허가제 등 토지이용규제를 활용한 홍수예방정책들이 폭넓은 동의를 얻어 활용되고 있는데 반해, 취약지에 대한 토지수용, 인센티브를 활용한 홍수예방정책들은 자주 채택되고 있지 않았다. 또한 해안가 도시들이 내륙도시보다는 도시계획을 통한 홍수예방에 훨씬 더 높은 관심을 보였다. 연구대상인 53개 계획의 평가점수는 평균 38.55로, 획득가능한 점수의 약 35.69%에 해당하여 여전히 지자체 차원에서 다양한 홍수예방정책이 수립되고 활용되고 있지 않으며 이러한 결과는 앞으로 더 많은 관심과 개선이 필요함을 의미한다. 본 연구에서 활용된 계획평가의 개념과 방법론은 기존계획의 수준을 평가하거나, 새로운 정책이나 계획을 준비하는데 유용한 틀을 제공하므로 우리나라에서도 다양한 환경, 재해 이슈에 적용할 수 있다.

  • PDF

지화학 자료의 확률론적 불확실성 및 위험성 분석을 위한 지시자 지구통계학의 응용 (Application of Indicator Geostatistics for Probabilistic Uncertainty and Risk Analyses of Geochemical Data)

  • 박노욱
    • 한국지구과학회지
    • /
    • 제31권4호
    • /
    • pp.301-312
    • /
    • 2010
  • 지화학 자료는 환경 관리를 위한 중요한 환경 변수중 하나로 인식되어 왔다. 지화학 자료는 보통 공간적으로 산재되어 수집되기 때문에, 샘플링 되지 않은 지점에서의 속성값 예측과 더불어 부가적인 분석을 위해 예측에 수반되는 불확실성을 추정할 필요가 있다. 이 논문은 지시자 지구통계학이 지화학 자료의 공간적인 분포값의 제시뿐만 아니라 의사결정을 보조할 수 있는 정보를 제공하기 위해 유용하게 사용될 수 있는지를 예시하고자 한다. 카드뮴 자료의 추정사례 연구를 통해 확률론적 불확실성 모델링, 위험성 분석 등 지구통계학적 분석의 틀을 제시하였다. 지시자 크리깅을 통해 조건부 누적 분포 함수를 모델링한 후에, 기대값 추정치와 조건부 분산을 카드뮴의 추정값과 정량적 불확실성 추정을 위해 각각 계산하였다. 그리고 확률 임계치와 속성 임계치의 적용을 통해 오염/비오염 지역을 구분하였다. 또한 조건부 분산과 속성값과 임계치값의 차이를 모두 설명할 수 있는 변동 계수를 통해 추가적인 샘플링 지점을 추출하였다. 이 연구에서 적용한 지시자 지구통계학적 분석 틀은 불확실성을 고려한 의사 결정과 관련하여 지화학 자료를 포함한 환경 변수의 분석에 유용하게 사용될 수 있을 것으로 기대된다.

21세기 과학적 소양 평가기준 개발 및 교과서 내용 분석에의 적용 (Development and Application of $21^{st}$ Century Scientific Literacy Evaluation Framework on Korean High School Science Text Books)

  • 문공주;문지영;조미영;정윤숙;김성원
    • 한국과학교육학회지
    • /
    • 제32권5호
    • /
    • pp.789-804
    • /
    • 2012
  • 본 연구는 21세기 과학적 소양을 탐색하기 위한 평가 기준을 개발하고, 이를 교과서 내용 분석에 적용하였다. 21세기 과학적 소양의 하위 영역으로 과학적 사고습관(habits of mind), 과학에서의 가치관(character and value), 과학 본성의 이해(science as human endeavor)를 설정하고, 각 하위 영역에 대한 평가 요소와 평가 기준을 개발하였다. 개발된 평가 기준은 21세기 과학적 소양이 교육 상황에서 실제 실현되고 있는가를 확인할 수 있는 지표이다. 개발된 평가 도구를 사용하여 2009 개정 교육과정에 기반을 둔 과학 교과서 내용에서 21세기 과학적 소양의 3개 영역에 관련된 내용이 포함되어 있음을 확인하였다. 이 중 과학적 사고 습관에 관련된 내용이 가장 높은 비율을 차지하였으며 과학에서의 가치관과 과학본성의 이해에 관련된 내용은 상대적으로 부족한 것을 알 수 있었다. 개발된 21세기 과학적 소양 평가 기준은 교과서 내용 분석 외에도 교실 수업 평가, 교사 평가, 교수-학습 자료의 평가에 활용하여 현장 과학 수업 실행에 대한 실질적인 이해를 가져올 수 있을 것으로 기대된다.