• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1095-1096
• /
• 2006

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of City Train Standard Specification Management process.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1140-1141
• /
• 2006

Diamond tools with several layers of diamond grits through thickness direction were tested by sawing. The saw blades with evenly distributed grits showed better cutting performance compared to the random distributed saw. At a given concentration of grits, as the spacing between layers was increased, the cutting performance was improved, and as decreased, it showed more tool life

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.861-862
• /
• 2006

The suitable tools for CGI material has not been developed yet because of high hardness, high toughness and very low machininability compared to the grey cast iron. And the tool life has been decreased as the contents of Ti in CGI material. From this research, we were able to do the high speed machining by using high toughness silicon nitride ceramic tools. The silicon nitride ceramic tool grade was specially designed and prepared with microstructure of elongated grains with higher aspect ratio (c/a) than conventional one.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.763-764
• /
• 2006

The rapid growth of Hardware technologies and Network fitted to us Ubiquitous Computing Life[1]. Ubiquitous Computing integrates computation into the environment, rather than having computers which are distinct objects. There are many computational things like a Sensor Network, RFID, GPS, Mobile devices, and so on. Ubiquitous Data Integration and Management are new paradigms. The goals of UDI Service Platform are data protection for the distributed data on pervasive computing devices and data distribution to appropriate users with best distribution policies. To implement the idea we evaluate the logical schema Cyber View that is a management tool.

• Journal of the Korean housing association
• /
• v.9 no.2
• /
• pp.51-56
• /
• 1998

With the improved quality of life standards interior design is recently gaining more concerns than ever before. This requires more well organized and standardized business and marketing in the field. Consequently, a few interior design firms concern about computerizing their marketing process to do this. This paper focuses on developing a computerized consulting system assisting interior design. For this a standardized consulting process is developed. The process includes the input of customer's information, surveying customer's preferences on interior design styles, estimation and budget adjustment, suggesting packages and interior items, and printing consulting results. The system developed is valuable in three different viewpoints: First, from the customer's view it can be a decision-making tool. Second, from the consultant's point of view it is a front-end marking tool. Third, it is an information collector from the viewpoint of an interior design firm.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.4
• /
• pp.98-107
• /
• 1996

In order to predict analytically torque, thrust force, tool life and chip formation in drilling, cutting models for chisel edge with various tool-chip contact length were developed in this type. Also, the experimental tests are run with various pilot holes. The following conclusions were obtained from the analysis. \circled1 It's also found experimentally that thrust force(Fz) decreases as pilot hole diameter increases. \circled2 Surface roughness for material(G) is larger that for material(J). The difference over two materials in roughness value about 0.5$mu extrm{m}$. \circled3 Flank wear of the drill in cutting material of G less than any other kinds of materials(F, G, H, I, J). \circled4 In drilling a deep hole on a workpiece over SM45C either twist drill. The chip was conical helix type at the fist suspensely change the two segment type and than two a long pitch helix style.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.5
• /
• pp.469-476
• /
• 2009

Hard facing overlay welding in high chromium carbide is a representative way of extending the fatigue life or recompensing damage, because workpiece surface is uniformly overlay-welded by alloy material. In general, grinding process is currently used for finish due to hardness of weld material. The development of tool material, such as PCBN, has made it possible to use turning instead of grinding. There are many advantages of hard Owning, as lower equipment costs, shorter setup time, fewer process steps, higher material removal rate, better surface integrity and the elimination of cutting fluid. In this paper, machining characteristics and cutting performance are examined to investigate turning possibility of overly welding in high chromium carbide.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.4
• /
• pp.601-611
• /
• 1998

The machining accuracy of CNC machine tools will decrease the production lead time because the coordinate compensation of the tool path will be unnecessary to meet design specifications. Improving the accuracy of machined parts enhances the reliability and functionality of the assembly as well as the life of the product. Among various factors affecting the accuracy of machined parts, the ambient temperature is the major factor that refers to the temperature surrounding the machine and workpiece. In this study, an experiment was conducted to confirm the dimensional variations caused by changes in the ambient temperature. The ambient temperature resulted in overcutting when it increased. A developed pre-processor converts the CNC program to compensate the dimensional variations caused by temperature changes. This methodology can be used to determine the machining accuracy and improve the positioning accuracy of a machine tool.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.294-298
• /
• 2000

As the LED or LCD technology has been developed, if we use LED or LCD pannel, more wide color range coluld be obtained as CRT monitor. Specially, full color LED display is developed by high brightness blue LED. It can be applicable to display pannel with a long-life, wide visible angle and high brightness. A display pannel shows the images of CRT monitor performed by the main computer. Graphic application in the main computer is therefore more important in the market. Conventional 3D STUDIO, one of graphic softwares, has difficulties in manipulating and understanding the specific terminology so that one may need more time to learn it. We, therefore, developed graphic application which can recycle the conventional 3D images by creating or editing the image easily.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.350-353
• /
• 2005

It is a feature of primary importance for a backing material for circular saw blades having teeth which are tipped with cermet, that the steel has not a too high hardenability in order that the backing material shall not be completely hardened through brazing, welding or grinding, etc. in connection with the finishing operation in the manufacturing of circular saw blade. It is believed that V-(2Mo+W) added steel from this point of view had best conditions. Using V-(2Mo+W) added backing steel, the tool failure can be effectively prevented due to superior damping performance.