• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.57-63
• /
• 2004

This paper describes a method for digitizing the compound surfaces which are comprised of several unknown feature shapes such as base surface, and draft wall. From the reverse engineering's point of view, the main step is to digitize or gather three-dimensional points on an object rapidly and precisely. As well known, the non-contact digitizing apparatus using a laser or structured light can rapidly obtain a great bulk of digitized points, while the touch or scanning probe gives higher accuracy by directly contacting its stylus onto the part surface. By combining those two methods, unknown features can be digitized efficiently. The paper proposes a digitizing methodology using the approximated surface model obtained from laser-scanned data, followed by the use of a scanning probe. Each surface boundary curve and the confining area is investigated to select the most suitable digitizing path topology, which is similar to generating NC tool-paths. The methodology was tested with a simple physical model whose shape is comprised of a base surface, draft walls and cavity volumes.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.1
• /
• pp.76-86
• /
• 2020

Technology growth curve methodology is commonly used in technology forecasting. A technology growth curve represents the paths of product performance in relation to time or investment in R&D. It is a useful tool to compare the technological performances between Korea and advanced nations and to describe the inflection points, the limit of improvement of a technology and their technology innovation strategies, etc. However, the curve fitting to a set of survey data often leads to model mis-specification, biased parameter estimation and incorrect result since data through survey with experts frequently contain outlier in process of curve fitting due to the subjective response characteristics. This paper propose a method to eliminate of outlier from a technology growth curve using M-estimator. The experimental results prove the overall improvement in technology growth curves by several pilot tests using real-data in Defense Science and Technology Survey reports.

• The KIPS Transactions:PartD
• /
• v.11D no.7 s.96
• /
• pp.1409-1416
• /
• 2004

Recently, due to the popularity and explosive growth of the Internet, information exchange is increasing dramatically over the Internet. Also the XML is becoming a standard as well as a major tool of data exchange on the Internet. so that in retrieving the XML document. the problem for speeding up evaluation of path-oriented queries is a main issue. In this paper, we propose a new indexing technique to advance the searching performance of path-oriented queries in document databases. In the new indexing technique, an abbreviation-path file to perform path-oriented queries efficiently is generated which is able to use its hash-code value to index keys. Also this technique can be further enhanced by combining the Extendible Hashing technique with the abbreviation path file to expedite a speed up evaluation of retrieval.

• Interaction and multiscale mechanics
• /
• v.4 no.3
• /
• pp.187-206
• /
• 2011

Accurate estimations of pre-failure deformations and post-failure responses of geostructures require that the simulation tool possesses at least three main ingredients: 1) a constitutive model that is able to describe the macroscopic stress-strain-strength behavior of soils subjected to complex stress/strain paths over a wide range of confining pressures and densities, 2) an embedded length scale that accounts for the intricate physical phenomena that occur at the grain size scale in the soil, and 3) a computational platform that allows the analysis to be carried out beyond the development of an initially "contained" failure zone in the soil. In this paper, a two-scale micropolar plasticity model will be used to incorporate all these ingredients. The model is implemented in a finite element platform that is based on the mechanics of micropolar continua. Appropriate finite elements are developed to couple displacement, micro-rotations, and pore-water pressure in form of $u_n-{\phi}_m$ and $u_n-p_m-{\phi}_m$ (n > m) elements for analysis of dry and saturated soils. Performance of the model is assessed in a biaxial compression test on a slightly heterogeneous specimen of sand. The role of micropolar component of the model on capturing the post-failure response of the soil is demonstrated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.295-298
• /
• 2000

In this research, a novel sampling strategy for a CMM to inspect freeform surfaces is proposed. Unlike primitive surfaces, it is not easy to determine the number of sampling points and their locations for inspecting freeform surfaces. Since a CMM operates with slower speed in measurement than optical measuring devices, it is important to optimize the number and the locations of sampling points in the inspection process. When a complete inspection of a surface is required, it becomes more critical. Among various factors to cause shape errors of a final product, curvature characteristic is essential due to its effect such as stair-step errors in rapid prototyping and interpolation errors in NC tool paths generation. Shape errors are defined in terms of the average and standard deviation of differences between an original model and a produced part. Proposed algorithms determine the locations of sampling points by analyzing curvature distribution of a given surface. Based on the curvature distribution, a surface area is divided into several sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number of sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number os sub-areas is determined by estimating the average of curvatures. Finally, the proposed method is applied to several surfaces that have shape errors for verification.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.3
• /
• pp.119-124
• /
• 2017

Machining optimization using typical computer-aided manufacturing (CAM) software mainly depends on tool paths, and it is impossible to predict the behavior of material or cutting force. In this paper, cutting force analysis simulation is performed on the Unibody Case of a mobile phone with the aim of optimizing cutting-force-based machining using the Third Wave Systems' AdventEdge Production Module. Machining time after optimization was shortened by 42% for roughing compared to pre-optimization, and actual machining time was reduced by 36.8%. For finishing, machining time was reduced by 92%, and actual machining time was reduced around 90%. A surface roughness analysis found that the post-optimization surface roughness was $1.16{\mu}m$ Ra, compared to a pre-optimization value of $1.75{\mu}m$ Ra.

• Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.261-267
• /
• 2015

Free-form blades are widely used in different industries, such as aero-engine and steam turbine. Blades that are damaged during service or have production deficiencies are usually replaced with new ones. This leads to the waste of expensive material and is not sustainable. However, material and costs can be saved by repairing of locally damaged blades or blades with localized production deficiencies. The blade needs to be further machined after welding process to reach the aerodynamic performance requirements. This paper outlines an adaptive location approach of repaired blade for model reconstruction and NC machining. Firstly, a mathematical model is established to describe the localization problem under constraints. Secondly, by solving the mathematical model, localization of repaired blade for NC machining can be obtained. Furthermore, a more flexible method based on the proposed mathematical model and the continuity of the deformation process is developed to realize a better localization. Thirdly, by rebuilding the model of the repaired blade and extracting repair error, optimized tool paths for NC machining is generated adaptively for each individual part. Finally, three examples are given to validate the proposed method.

• The Journal of Korean Association of Computer Education
• /
• v.4 no.2
• /
• pp.105-114
• /
• 2001

This paper illustrates a calculus module which generates step-by-step solutions using J/Link that connects Java and Mathematica. Such a module provides intermediate and low level students with a practical environment where they can easily follow the solution paths on their own paces. The extra feature of this module depicts graphical images for a given function and its differentiated result to enhance the visual understandings of calculus concepts. Mathematica as a mathematical expert system that provides systematic mathematical knowledge to students with step-by-step solutions will be possibly extended to the tutorial or CMI development. The proposed module is implemented in a Java servlet that links to Mathematica FrontEnd. This approach results in adopting font systems to express two dimensional mathematical expressions in web documents as an alternative typesetting tool.

• Journal of the Korean Society of Food Culture
• /
• v.35 no.1
• /
• pp.65-78
• /
• 2020

The objective of this study was to review and evaluate the growing subject of food tourism research, and thus identify the trend of food tourism research. Using a Text mining technique, this paper discovered the trends of the literature on food tourism that was published from 2004 to 2018. The study reviewed 201 articles that include the words 'food' and 'tourism' in their abstracts in the KCI database. The Wordscloud analysis results presented that the research subjects were predominantly 'Festival', 'Region', 'Culture', 'Tourist', but there was a slight difference in frequency according to the time period. Based on the main path analysis, we extracted the meaningful paths between the cited references published domestically, resulting in a total of 12 networks from 2004 to 2018. The Text network analysis indicated that the words with high centrality showed similarities and differences in the food tourism literature according to the time period, displaying them in a sociogram, a visualization tool. This study has implications that it offers a new perspective of comprehending the overall flow of relevant research.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.10
• /
• pp.68-79
• /
• 1999

This paper describes an approach to collaborative design which focuses on the effects of individual activities on the overall design process. We utilize a new process modeling tool to define the process and then analyze and refine the process based on critical paths. This information is then shared over the Internet with all participants. The goal of this system is to detect critical errors at initial design stage and guide the designers to make better decisions based on the knowledge of the overall process. This system enables participating designers to publish his local process through an Internet bulletin board. Other members of the team can then provide feedback based on how the proposed process impacts their activities. The system provides a context-rich, persistent forum for collecting, preserving, and refining corporate expertise of the team. For example, designers can select any process from the bulletin board and use it as a template for his current project and then use it to maintain his own design history. This paper is based on the process modeling concepts of Design Roadamap and describe several key extensions in the area of CPM calculations and collaborative interfaces.