• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.883-888
• /
• 2011

복강경을 이용한 수술법은 입원 기간 단축 및 상처의 감소라는 장점이 있지만 수술 도구 끝단의 움직임의 제한으로 인한 수술 난이도의 증가라는 단점이 있다. 이를 숙련시키기 위해 동물을 이용하여 대체수술을 하거나, Surgery training tool set을 이용하여 조작 기술 습득을 위한 훈련을 하고 있다. 하지만 이 방법들은 사람에게서 느껴지는 촉감을 그대로 재현하지 못한다. 따라서 본 논문은 4-자유도계의 복강경 수술 의료 훈련 시뮬레이터를 통해 원활한 햅틱 피드백을 제공하였다. 햅틱 장비의 기본 요구조건인 무중력, 무마찰 상태를 만족시키기 위해 장비의 중력 및 마찰력을 측정하였다. 이를 위해 의료 시뮬레이터의 모델링을 하여 시술기에 작용하는 중력과 마찰력을 측정하고 이를 선형화 시킨후 이를 토대로 보상기를 모델링하고 이를 검증하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.13-18
• /
• 1998

The assessment of machined surface is difficult because the freeform surface must be evaluated by surface fairness as well as dimensional accuracy. In this paper, the methodology of freeform surface generation using measured data on the machine tool is presented. The reliability of measured points data is obtained by measuring error compensation. The compensated data are formulated through Non-uniform G-spline surface modeling. In order to improve the surface fairness, the generated model si smoothened by parameterization The validity and usefulness of the proposed method are examined through computer simulation and experiments on the machine tool.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.313-314
• /
• 2012

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.214-219
• /
• 2001

One of the major limitations of productivity and quality in metal cutting is the machining accuracy of machine tools. The machining accuracy is affected by geometric errors, thermally-induced errors, and the deterioration of the machine tools. Geometric and thermal errors of machine tools should be measured and compensated to manufacture high quality products. In metal cutting, the machining accuracy is more affected by thermal errors than by geometric errors. In this study, the compensation device and temperature-based algorithm have been presented in order to compensate thermal error of machine tools under the real-time. The thermal error is modeled by means of angularity errors of a column and thermal drift error of the spindle unit which are measured by the touch probe unit with a star type styluses, a designed spherical ball artifact, and five gap sensors. In order to compensate thermal characteristics under several operating conditions, experiments performed with five gap sensors and manufactured compensation device on the horizontal machining center.

• 한국정밀공학회지
• /
• 제17권4호
• /
• pp.135-141
• /
• 2000

The major role of temperature sensors in thermal error compensation system of machine tools is improving machining accuracy by supplying reliable temperature data on the machine structure. This paper presents a new method for fault diagnosis of temperature sensors and recovery of faulted data to establish the reliability of thermal error compensation system. The detection of fault and its location is based on the correlation coefficients among temperature data from the sensors. The multiple linear regression model which is prepared using complete normal data is also used fur the recovery of faulted data. The effectiveness of this method was tested by comparing the computer simulation results and measured data in a CNC machining center.

• 한국생산제조학회지
• /
• 제9권4호
• /
• pp.117-122
• /
• 2000

This paper presents an indirect compensation of thermal errors during machining , in which thermal error is modelled as a linear regression of temperatures measured at 4 specified positions. In this regression model, weighting coefficients of the measured temperatures were estimated by using the least square method. The grinding test with compensation , after 4 -hour warning-up operation before the test, showed that the maximum machining error of the work pieces was reduced to 12${\mu}{\textrm}{m}$ while it measured by 28${\mu}{\textrm}{m}$ without compensation . Furthermore the standard deviation of machining errors was also reduced from 8${\mu}{\textrm}{m}$ to 2${\mu}{\textrm}{m}$.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1542-1551
• /
• 1990

본 연구에서는 직경오차를 최종 다듬질 가공 직전에 선반의 주축 정지 상태에 서 공구대에 부착시킨 전기마이크로미터로 측정하는 방법을 이용하여, 어떠한 공작물 형상에 대해서도 오차 측정경로를 NC 프로그램으로 자동 생성하고 이를 이용하여 직경 오차를 측정, 보정하는 알고리즘을 제안함과 동시에 수정된 최종 다듬질 가공용 NC프 로그램을 자동적으로 생성하는 시스템을 개발하고자 한다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.385-390
• /
• 2000

This paper deals with the design and simulation of the hybrid power filter to compensate reactive power and harmonic components of nonlinear load. Control target is a 3-phase diode full bridge rectifier with L-R-C nonlinear load, this load is assumed adjustable speed driver(ASD). The hybrid filter consists of a shunt active filter, shunt passive filters and series inductors. Control algorithm is based on instantaneous power compensation theory proposed by H.Akagi and etc. The result from simulation shows the hybrid filter is superior than other filters on the point of compensation performance and low cost. The PSCAD/EMTDC 3.0 is used as simulation tools.

• 한국정밀공학회지
• /
• 제19권1호
• /
• pp.56-64
• /
• 2002

Machine tools are engineered to give high dimensional accuracy in machining operation. However, errors due to thermal effects degrade dimensional accuracy of machine tools considerably, and many machine tools are equipped with thermal error compensation function. In general, thermal errors can be generated in the angular directions as well as linear directions. Among them, thermal errors in the angular directions contribute a large amount of error components in the presence of offset distance as in the case of Abbe error. Because most of thermal error compensation function is based on a good correlation between temperature change and thermal deformation, angular thermal deformation is often to be the most difficult hurdle for enhancing compensation accuracy. In this regard, this paper investigates the effect of thermal bending to total thermal error and gives how to deal with thermally induced bending effects in thermal error compensation.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.71-73
• /
• 2001

The requirements for higher productivity call for high speed of the machine tool axes. Iron core type linear DC motor is growly accepted for a viable candidate of the high speed machine tool feed unit. LDM, however, has inherent disturbance force components: cogging and force ripple. These disturbance force directly affects the carrage tracking accuracy and must be eliminated or reduced. Reducing motor ripple, this paper adapted the feed forward compensation method. Experiments carried out on the linear motor test setup show that this compensation method is usable in order to reduce the motor ripple.