• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.722-724
• /
• 1998

One of the major concerns of our time is the need to use energy economically and rationally while at the same time, protecting the environment. Circulating Fluidized Bed(CFB) Boilers represent a proven, very attractive clean coal technology, with the added advantage of an unusual fuel flexibility CFB boiler is the best available compromise between cost and environment for fossil fuel power plant. This paper briefly describes CFB process and 200MW CFB boiler for Tonghae power plant. Also, discussed are differences between the control process of fluidized bed and conventional boilers, and applied control process for Tonghae power plant.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.231-237
• /
• 2005

Interruption of good fluidization in a fluidized bed ash cooler(FBAC) for discharging bed materials such as sand or coal ash particles from the CFB combustor is frequently happened because of agglomeration of the particles in the bed. This unstable operation may, in the worst case, result in an unscheduled boiler shut down. In this study, we examined the operation problems of the FBAC of Tonghae CFB boiler and studied and introduced the simple detection and solution techniques with analyzing the mixing property and the occurrence of defluidization in a simulated fluidized bed ash cooler system (0.5m-H x 0.5m-W x 1.0m-L). The bridge of the large particles at the bed surface could be observed, and this caused to form the defluidization area at the entrance of the FBAC. The defluidization was affected not only by airflow rates but also by the particles discharging rates as well as particle size distribution in the FBAC. The local defluidization could be detected by analysis of the accumulated standard deviation error at a given period of time. Also, the regulation of the overall or local airflow rate made clearing up the local defluidization possible.

• 분석과학
• /
• 제13권1호
• /
• pp.5-11
• /
• 2000

시운전중인 국내 최대 규모의 유동층 보일러에서 발생한 크링커의 생성원인을 규명하기 위해 현장에서 크링커 및 사용중인 무연탄의 회, 모래, 석회석을 채취하였다. 발전소에서 시행중인 운전조건을 고려하여 이들에 대한 비율별 및 온도 조건 변화에 따른 각 시료의 성분 분석, 표면형상 관찰, 열특성 분석 및 결정구조 분석을 실시하였다. 크링커는 횐 색과 검은 색 및 갈색 부분으로 되어 있었으며 이를 색깔별로 크게 흰 색 및 검은 색으로 구분하여 실험을 하였다. 그 결과 검은 색은 모래, 흰 색은 무연탄 회에 보다 유사한 특성을 지녔고, 온도에 따른 실험 결과, 모래의 소결온도는 $1,200^{\circ}C$ 이상의 고온인 반면에 모래에 석회석을 혼합할 경우, 소결온도가 낮아짐을 알 수 있었다. 따라서 크링커의 생성원인은 유동층 보일러 내에 고온부가 형성되어 모래와 석회석이 용융 또는 소결된 상태에 무연탄회가 부착되어 형성된 것으로 판단되었다.

• 한국연소학회지
• /
• 제10권3호
• /
• pp.1-9
• /
• 2005

The characteristics of co-combustion of Korean anthracite and bituminous coal was determined in a TGA and a lab-scale CFB reactor. The combustion reactivity of Korean anthracite (E = 51.2 kcal/mol) was much lower than that of bituminous coal (E = 14.5 kcal/mol). As the addition amount of the bituminous coal into the anthracite was increased, the reactivity of the anthracite was found to be improved. The effluent rate of the emission gases from the CFB reactor was not changed appreciably when each coal burned. As the bituminous coal was added, however, the effluent rate of the emissions was increased. The unburned carbon in fly ash from the CFB reactor was decreased with increasing the ratio of bituminous coal in co-combustion. But as the ratio of the bituminous coal was larger than 40 %, the combustion reactivity was not increased any more.