• 청정기술
• /
• 제4권1호
• /
• pp.35-44
• /
• 1998

휘발성 유기화합물(벤젠, 톨루엔, 에틸벤젠, 크실렌)의 광분해를 단순 UV조사와 $TiO_2$ 광촉매하의 UV조사를 이용하여 연구하였고 또한 여러 가지 반응조건에 따른 분해효율에 대해 고찰하였다. 광분해반응기는 중압 수은램프가 부착된 석영 annular 반응기를 이용하였다. UV조사에 의한 휘발성유기화합물의 분해정도는 톨루엔 92% ${\geq}$ 에틸벤젠 92% > 벤젠 83% > 크실렌 82% 였고, $TiO_2$ 광촉매하의 UV조사를 이용한 유기물의 분해정도는 톨루엔 92% > 크실렌 82% > 에틸벤젠 80% > 벤젠 53% 였다. 반응물의 분석은 Purge & Trap 농축기를 이용하여 FID가 부착된 GC로 분석하였고, GC-MS로 반응물의 중간생성물을 확인하였다.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.84-90
• /
• 2005

Thermal decomposition of the copolymer of ${\alpha}$-Methylstyrene(AMS) with Acrylonitrile(AN) was investigated. The copolymer was synthesized in a continuous stirred tank reactor(CSTR) at $80^{\circ}C$ using toluene and benzoyl peroxide(BPO) as solvent and initiator, respectively. The reactor volume was 0.3 liters and residence time was 3 hours. The activation energy of thermal decomposition was in the ranges of $34{\sim}54$ kcal/mol for AMS with AN copolymer. The thermogravimetric trace curves were well agreed with the theoretical calculation.

• 한국환경과학회지
• /
• 제21권11호
• /
• pp.1321-1331
• /
• 2012

To date, carbon and nitrogen co-doped photocatalysts (CN-$TiO_2$) for environmental application focused mainly on the aqueous phase to investigate the decomposition of water pollutants. Accordingly, the present study explored the photocatalytic performance of CN-$TiO_2$ photocatalysts for the purification of indoor-level gas-phase aromatic species under different operational conditions. The characteristics of prepared photocatalysts were investigated using X-ray diffraction, scanning emission microscope, diffuse reflectance UV-VIS-NIR analysis, and Fourier transform infrared (FTIR) analysis. In most cases, the decomposition efficiency for the target compounds exhibited a decreasing trend as input concentration (IC) increased. Specifically, the average decomposition efficiencies for benzene, toluene, ethyl benzene, and xylene (BTEX) over a 3-h process decreased from 29% to close to zero, 80 to 5%, 95 to 19%, and 99 to 32%, respectively, as the IC increased from 0.1 to 2.0 ppm. The decomposition efficiencies obtained from the CN-$TiO_2$ photocatalytic system were higher than those of the $TiO_2$ system. As relative humidity (RH) increased from 20 to 95%, the decomposition efficiencies for BTEX decreased from 39 to 5%, 97 to 59%, 100 to 87%, and 100 to 92%, respectively. In addition, as the stream flow rates (SFRs) decreased from 3.0 to 1.0 L $min^{-1}$, the average efficiencies for BTEX increased from 0 to 58%, 63 to 100%, 69 to 100%, and 68 to 100%, respectively. Taken together, these findings suggest that three (IC, RH, and SFR) should be considered for better BTEX decomposition efficiencies when applying CN-$TiO_2$ photocatalytic technology to purification of indoor air BTEX.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2006년도 춘계학술대회 논문집
• /
• pp.503-504
• /
• 2006

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.415-416
• /
• 2000

플라즈마 화학공정을 이용한 유해대기오염물질(HAP$_{s}$ 또는 VOC$_{s}$ ) 처리기술은 기존의 촉매연소, 소각 및 흡착기술등에 비하여 낮은 초기 투자비, 여러가스의 동시처리, 소형화 또는 이동 배출원에 대한 적용이 가능하며, 대상가스의 종류나 발생량등에 따라 여러 전원(AC, Pulse, DC)을 이용한 기술개발이 가능하여 많은 연구가 진행되고 있다.$^{(1-4)}$ (중략)

• 한국응용과학기술학회지
• /
• 제26권2호
• /
• pp.205-212
• /
• 2009

Solution copolymerization of Styrene(St.) with 2-Hydroxypropylacrylate(2-HPA) was carried out with Benzoylperoxide(BPO) as an initiator in toluene at $80^{\circ}C$ in a batch reactor. Reaction volume and reaction time were 0.3 liters, 8 hours respectively. The time to reach steady state was about the six time. The monomer reactivity ratios, $r_1$(St.) and $r_2$(2-HPA) were determined by both the Kelen-Tudos method and the Fineman-Ross method ; $r_1$(St.)=0.376(0.330), $r_2$(2-HPA)=0.408(0.778). The activation energy of thermal decomposition was in the range of $33{\sim}55kcal/mol$.

• 한국환경과학회지
• /
• 제11권7호
• /
• pp.743-748
• /
• 2002

UV photolysis process is little known in parts of air pollution treatment, so there are not many applications in field. Therefore we have to do more experiment and study application possibility for treatment of VOCs(Volatile organic compounds). To solve these problems, we have been studying for simultaneous application of this technology. It has shown that concentration of TCE and B.T.X., diameter of reactor and wavelength of lamp have effected on decomposition efficiency. Analysis of TCE and B.T.X. concentration was carried out by GC-FID. A cylinderical reactor consisting of a quartz tube and a centrally located lamp(${\psi}25mm$) was used. The length and diameter of reactor were 1800mm, 75mm. It has shown that the generated ozone concentration goes up 250ppm when using 64watt ozone lamp. When using Photolysis process only, the rates of fractional conversion of each material are TCE 79%, Benzene 65%, Toluene 68%, Xylene 76%. This phenomenon can be rationalized in terms of the different bond energy that indicates how easily VOCs species can be decomposed.

• Bulletin of the Korean Chemical Society
• /
• 제27권10호
• /
• pp.1572-1576
• /
• 2006

A dimeric precursor, $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ for the CVD of copper metal films, (dmaeH = N,N-dimethylaminoethanol) was synthesized by the reaction of copper(II) acetate monohydrate ($Cu(OCOCH_3)_2{\cdot}H_2O$) and dmaeH in toluene. The product was characterized by m.p. determination, elemental analysis and X-ray crystallography. Molecular structure of $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ shows that a dimeric unit $[Cu(dmae)(OCOCH_3)(H_2O)]_2$ is linked to another through hydrogen bond and it undergoes facile decomposition at 300 C to deposit granular copper metal film under nitrogen atmosphere. The decomposition temperature, thermal behaviour, kinetic parameters, evolved gas pattern of the complex, morphology, and the composition of the film were also investigated.

• Asian Journal of Atmospheric Environment
• /
• 제2권2호
• /
• pp.75-80
• /
• 2008

A new-type apparatus decomposing volatile organic compounds (VOCs) using a combination system of an electrical exothermic SiC honeycomb and a catalytic filter was developed. This linear combination system is very useful to the catalytic decomposition of VOCs, because the gas involving VOCs is well heated in the SiC honeycomb and then flows into the catalytic filter. In the proposed apparatus, the outlet gas temperatures of SiC honeycomb maintained at ca. $300^{\circ}C$ after 5 min from the starting of applying electric current, and sufficient for the catalytic degradation of VOC components, i.e. toluene, isopropanol, methyl ethyl ketone and ethyl acetate. The average decomposition rate of total VOCs exhausted from a printing factory was 85% using pt catalyst at SV=19,000 in this system.

• Bulletin of the Korean Chemical Society
• /
• 제29권6호
• /
• pp.1217-1223
• /
• 2008

A series of Zr,S co-doped $TiO_2$ were synthesized by a modified sol-gel method and characterized by various spectroscopic and analytical techniques. The presence of sulfur caused a red-shift in the absorption band of $TiO_2$. Co-doping of sulfur and zirconium (Zr-$TiO_2$-S) improves the surface properties such as surface area, pore volume, and pore diameter and also enhances the thermal stability of the anatase phase. The Zr-$TiO_2$-S systems are very effective visible-light active catalysts for the degradation of toluene. All reactions follow pseudo firstorder kinetics with the decomposition rate reaching as high as 77% within 4 h. The catalytic activity decreases in the following order: Zr-$TiO_2$-S >$TiO_2$-S >Zr-$TiO_2$>$TiO_2$$\approx$ P-25, demonstrating the synergic effect of codoping with zirconium and sulfur. When the comparison is made within the series of Zr-$TiO_2$-S, the catalytic performance is found to be a function of Zr-contents as follows: 3 wt % Zr-TiO2-S >0.5 wt % Zr-$TiO_2$-S> 5 wt % Zr-$TiO_2$-S >1 wt % Zr-$TiO_2$-S. Higher calcination temperature decreases the reactivity of Zr-$TiO_2$-S.