• Biotechnology and Bioprocess Engineering:BBE
• /
• v.10 no.1
• /
• pp.34-39
• /
• 2005

Trichloroethylene (TCE) is an environmental contaminant provoking genetic mutation and damages to liver and central nerve system even at low concentrations. A practical scheme is reported using toluene as a primary substrate to revitalize the biofilter column for an extended period of TCE degradation. The rate of trichloroethylene (TCE) degradation by Pseudomonas putida F1 at $25^{\circ}C$ decreased exponentially with time, without toluene feeding to a biofilter column ($11\;cm\;I.D.{\times}95\;cm$ height). The rate of decrease was 2.5 times faster at a TCE concentration of $970\;{\mu}g/L$ compared to a TCE concentration of $110\;{\mu}g/L$. The TCE itself was not toxic to the cells, but the metabolic intermediates of the TCE degradation were apparently responsible for the decrease in the TCE degradation rate. A short-term (2 h) supply of toluene ($2,200\;{\mu}g/L$) at an empty bed residence time (EBRT) of 6.4 min recovered the relative column activity by $43\%$ when the TCE removal efficiency at the time of toluene feeding was $58\%$. The recovery of the TCE removal efficiency increased at higher incoming toluene concentrations and longer toluene supply durations according to the Monod type of kinetic expressions. A longer duration ($1.4{\sim}2.4$ times) of toluene supply increased the recovery of the TCE removal efficiency by $20\%$ for the same toluene load.

• Korean Chemical Engineering Research
• /
• v.44 no.2
• /
• pp.129-135
• /
• 2006

In this study, computer modeling and simulation works were performed to obtain nearly pure toluene product from toluene containing non-aromatic compounds using sulfolane as a solvent through an extractive distillation process. NRTL liquid activity coefficient model was adopted for phase equilibrium calculations and Aspen Plus release 12.1, a commercial process simulator, was used to simulate the extractive distillation process. In this study, it was concluded that the toluene product with a purity of 99.8 percent by weight and a recovery of 99.65 percent was obtained through an extractive distillation process.

• Journal of Food Hygiene and Safety
• /
• v.14 no.1
• /
• pp.76-83
• /
• 1999

Solid phase microextraction (SPME) was used for the determination of 6 standard solvents (methanol, isopropanol, methyl ethyl ketone, ethyl acetate, cyclohexane, toluene) in food packaging materials. SPME method is a solvent-free sample preparation technique in which a fused silica fiber coated with polymeric organic liquid is introduced into the headspace above the sample. SPME method using fiber coated polydimethylisiloxane (PDMS) was compared with static headspace (SHS) method used as a reference. It was found that the optimal adsorption condition using PDMS-SPME method was 2$0^{\circ}C$ for 15 minutes for the standard solvents. Detection limits, linearity, reproducibility and recovery of both SHS and PDMS-SPME methods have been determined using 6 standard solvents. Both methods were characterized by high reproducibility and good linearity. Using SHS methods, the mean recovery of the 6 standard solvents was ranged from 75.5% to 105.8% with a mean relative standard deviation (RSD) of 0.3% to 4.8%. With PDMS-SPME method, the mean recovery of the 6 standard solvents was ranged from 86.7% to 108.3% with a mean RSD of 0.4% to 2.5%. The detection limits of both methods were the same for toluene, cyclohexane and methyl ethyl ketone; those of PDMS-SPME method were higher than those of SHS method for methanol, isopropanol and ethyl acetate. PDMS-SPME fiber shoed excellent adsorption for non-polar solvents such as toluene, while it showed relatively low adsorption for polar solvents such as methanol.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.15-20
• /
• 2011

The contamination effect of toluene in the airstream on PEM fuel cell performance was studied with various toluene concentration under different operation conditions. And the recovery of the cell performance by applying clean air and the removal of toluene in the air by adsorption of active carbon were investigated. The toluene concentration range used in the experiments was from 0.1 ppm to 5.0 ppm. The performance degradation and recovery were measured by constant-current discharging and electrochemical impedance spectroscopy(EIS). Toluene adsorption capacity of KOH impregnated active carbon was obtained from the adsorption isotherm curve. The severity of the contamination increased with increasing toluene concentration, current density and air stoichiometry, but decrease with increasing relative humidity. The cell performance was recovered by toluene oxidation with oxygen and water in humidified neat air. EIS showed that the increase of charge transfer resistance due to toluene adsorption on Pt surface mainly reduced the performance of PEMFC. Toluene adsorption capacity of active carbon decreased as KOH weight increased in KOH impregnated active carbon.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.953-957
• /
• 2001

The specificity of conjugation site for coating ligands was investigated using toluene-bovine serum albumin (BSA) conjugates in which BSA was conjugated at the position of o-, m-, and ${\rho}-toluic$ acid. Toluene-BSA conjugated at ${\rho}-position$ showed a binding activity of about 89-95%, whereas, those conjugated at o- and m-position of toluene exhibited a binding activity of 5 and 11%, respectively. On the basis of the above result, coating ligands with various proteins (OVA, BSA, KLH) were compared by conjugating with $\rho-toluic$ acid, and toluene-KLH was considered as the best coating ligand for this ELISA. Indirect competitive ELISA method was developed using anti-toluene antibody and $\rho-position$ conjugated toluene-KLH. The dose-response curve constructed after kinetic and optimization studies showed a 1${\times}$10-4 - 1${\times}$102 mM detectable response range with 0.1 ${\mu}M$ detectability. In specificity test of the antibody, the binding capabilities of aromatic compounds substituted with nitro-, alkyl-, chloro-, and hydroxyl group were larger rather than those of aromatic compounds (benzene, toluene and xylene) themselves. Also, tests with soil and water samples that had been spiked with toluene resulted in 102.7-113.7% recovery.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.2
• /
• pp.156-165
• /
• 2015

Objectives: The purpose of this study was to investigate the possible effects of a gasoline vapor recovery system on personal exposure levels of gasoline vapor constituents including benzene, toluene, ethyl benzene, xylene(BTEX), and methyl tert-butyl ether(MTBE) among gas station workers in a metropolitan area. Methods: Thirty-one gas station workers at ten gas stations in a metropolitan area were selected as subjects for this study. Test method PV2028 as recommended in the OSHA process was used for sampling and analysis. Results: The personal exposure levels of benzene, toluene, ethyl benzene, xylene, MTBE and gasoline vapor in the gas station workers were $0.0018{\pm}0.0069ppm$, $0.0077{\pm}0.0137ppm$, $0.0002{\pm}0.0008ppm$, $0.0016{\pm}0.0084ppm$, $0.2619{\pm}0.3340ppm$, and $1.4940{\pm}1.7984ppm$, respectively. After adjustment for refueling frequency and volume, personal exposure levelswere higher in the gas stations where gasoline vapor recovery systems(Stage II) were not installed, but the results were not statistically significant. Gasoline vapor concentrations showed a positive correlation to the level of MTBE, a gasoline additive. Conclusions: Vapor recovery systems(Stage II) were effective not only in reducing emissions of air pollutants, but also in reducing exposure to hazardous substances among gas station workers. In addition, acorrelation between gasoline vapors and MTBE concentration was confirmed.

• Korean Chemical Engineering Research
• /
• v.51 no.5
• /
• pp.545-549
• /
• 2013

For the purpose of development of effective synthetic process of CHMI, a series of experiments were preformed on the preparation of CHMAIE, the intermediate of CHMI. For the first step, CHMA was synthesized by dropwise mixing of cyclohexylamine with maleic anhydride in toluene and 98.2% of theoretical CHMA was obtained by precipitation at $10^{\circ}C$ for 2 hours. The optimum reaction temperature of the esterfication, preparation reaction of CHAMIE from CHMA, was $68^{\circ}C$, and equilibrium conversion at optimum temperature was 98.5%. Equilibrium reaction time decreased with reaction temperature, and 4 hours was taken to reach equilibrium at optimum reaction temperature. Toluene in the final reaction product could be recovered by vacuum distillation. The recovery of toluene was increased with distillation temperature and 98% of toluene could be recovered at $55^{\circ}C$.

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1131-1139
• /
• 2013

Desorption characteristics of VOCs were investigated for the effective recovery of gasoline vapor. The adsorption capacity and desorption capacity were excellent at relatively low temperatures. The differences in the desorption capacity were not large in the condition; desorption temperature $25^{\circ}C$, desorption pressure 760 mmHg, inlet air flow rate 0.5 L/min, but were relatively great in the condition; desorption temperature $0^{\circ}C$, desorption pressure 60 mmHg, inlet air flow rate 1.0 L/min. The desorption ability of pentane was increased to about 81.4%, and the desorption ability of hexane was increased to about 102%, also the desorption ability of toluene was increased to about 156.7% by changes of temperature, pressure, inlet air flow rate in the experimental conditions. The optimum desorption condition for the effective recovery of VOCs was in the conditions; desorption temperature $0^{\circ}C$, desorption pressure 60 mmHg, inlet air flow rate 1.0 L/min.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3717-3722
• /
• 2021

In this study, the recovery rates of the dissolution method for radioactivity analysis of expandable polystyrene (EPS) with a liquid scintillation counter (LSC) using tetrahydrofuran (THF), toluene, and acetone as solvents were estimated. The detection efficiency calibration curve for each solvent was derived. Two methods-the volumetric ratio method and the quenching agent method-were used to prepare quench source sets, and calibration curves were derived by linking the data from the two quench source sets. The R² value of the calibration curve for THF was found to be 0.984. The relationship between the mass of dissolved EPS and the quench level was estimated: the quench level increased as the mass of dissolved EPS increased. Premix and postmix dissolution methods were tested. The recovery rates using THF with the premix method were 84.9 ± 0.9% and 96.5 ± 1.5% for ³H and ¹⁴C, respectively. Furthermore, the stability of the recovery rate over time when using THF was evaluated. The dissolution method with the premixed solution exhibited a more stable recovery rate over time. The dissolution methods were found to be applicable for analysis using LSC, and THF was found to be the most suitable solvent for the proposed method.

• Resources Recycling
• /
• v.8 no.3
• /
• pp.31-36
• /
• 1999

In the process of manufacturing acrylonitrile, azeotrope of water-acetonitrile is formed as by-product. To1uene-ethylacetate mixture was selected as solvent to determine the liquid-liquid equilibria for to1uene(l)-water(2)-acetomtrile(3)-ethyjacetate(4) system. The experimental he-line data were correlated with the UNIFAC model. The distribution and selectivity for quaternary system was also studied.